Abstract (in English)The task for the diploma work was to develop methods for measuring of moisture content by the Karl Fischer method, in jam, jelly sweets, and fudge.The start premises was a for the company whole new equipment, which should be started up. Then programs should be developed for different kind of samples.In the task it was as well included to develop methods for dissolving the different kind of samples, since the Karl Fischer method demands completely dissolved sample material..

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

The manufactory industry, due to decline in profit margins, is seeking new business opportunities by moving towards servitization and value-adding services in after-sales. We have therefore conducted a case study to investigate a manufacturing company in their current transformation towards servitization. By studying the management perspective, we aimed to understand how Information Technology, by adding value, could play a role in the transformation process. This study shows that information technology can take an integrating role, by supporting new value-adding services to provider and customer, as well as a co-creating role, where both provider and customer benefits by learning from each other, in the changing work process initiated by new services. The study has also shown that Information Technology, together with organization, information and people, are crucial components in the manufactory industry?s transformation towards servitization.  Furthermore, the study has also shown that the value chain has the potential to drastically change due to the value-adding that the information technology brings to the progress of servitization..

As technology have continued to develop over the latest decades and become more advanced the pressure on the general citizens understanding of technology becomes a essential part to live in our society today. The transition have affected our society in great ways and have made a great impact on different groups, one of them being the elderly population in our society. The purpose of this study is to examine how the fast technological development in the latest decades have affected the elderly in our society. This from their perspective by gathering empirical data through semi-structured interviews with elderly people involved in the Agnes-project, a research project focused on improving the general quality of life for older people and increase their knowledge about technology. The study has shown that after the older peoples time involved in the Agnes-project their quality of life had improved in different areas. Areas such as increased cognitive activity, increased interest in new technology and an improvement in their communication with friends and family.

Abstract In the contemporary world of information technology you find a multitude of applications and systems covering a broad spectrum of areas of need in different companies. One effect of this multitude of programs is the difficulty to make them exchange information with each other or to collaborate, since they are developed by different programming languages for different platforms, with different standards and different data formats. Our aim with this work is to describe how it is possible to tie these programs together to make them actually communicate with each other in order to exchange information, share their native methods and also to become a part of the overall business processes. In this integration task you will, among other things, find different levels of application integration such as data level, method level, application interface level and user interface level integration. Application integration also involves hardware components, called middleware, that facilitate the physical connection between applications. There is a range of different middleware products offered today on the market.

The purpose of this paper is to identify the current status of fuel cell technology and to establish whether said technology is mature enough to be implemented into the Swedish Armed Forces. The question to be answered in this paper is as follows: Can hydrogen gas and fuel cells be used as an alternative source of energy within the Swedish Armed Forces?This paper is based on theoretical studies and reports from prior research done on fuel cells. By studying these facts a predictive answer has been obtained. The answer I have come to, is that the maturity of fuel cell technology is currently inadequate for the Swedish Armed Forces to implement, especially considering its harsh working conditions..

The Mission at ÅF Industry in Norrkoping was about optimizing bulk data handling while importing process tag types from their construction database into the Process Controlled System of type Siemens PCS7.I found three different methods to solve the task. Two of them were using different software from Siemens under the premise that the report from the database was corrected as needed. The third variant was manually creating the circuits. All methods worked out fine but there were times when one was better than another.To solve this task I had access to all software presented in chapter 2 ?Programvara? (=Software).

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

Teknikämnet har, sedan det fick en egen kursplan, åsidosatts i skolorna. Deltagande observationer och intervjuer med lärare verksamma i varierade åldersgrupper, visade samma resultat gällande tankar kring teknikundervisningen som de uppfattningar som litteraturstudien visat. Det framgår att många lärare inte uppfattar sin ämneskompetens som tillräcklig och att de inte vet hur de ska förhålla sig till ämnet i undervisningen. Resultaten av dessa studier ligger till grund för ett läromedel, bestående av en elevbok och en lärarhandledning, som utgår både från Lpfö 98 och centrala innehållet för år 1-3 och 4-6 ur kursplanen i teknik i Lgr 11..

The purpose of this thesis is to examine which factors influence librarians selection of electronic information sources, and to investigate whether librarians use of search strategies and search tactics changes depending on which information source they use. The electronic information sources are: online databases, Online Public Access Catalogues OPAC, World Wide Web, and CD-ROM databases. The theoretical framework is based on step 3 Select a source and step 4 Formulate a Query in Marchioninis information seeking model. The search strategies are divided into two categories: analytical and browsing strategies. In order to supplement the theoretical framework with empirical facts, 8 librarians were interviewed.

The purpose of this study is to understand the factors that are affecting students at the Technology and Electricity- and energy programs in their choice of studies and vocation. The study is a comparative case study and quantitative method has been used in the form of questionnaires. The result shows that students do not like to be affected by another person but believes that they themselves have made their choice. Interest turns out to be the biggest influence factor of choice for both students at the Technology and Electricity- and energy program. For Electricity- and energy students have also access to work had some impact.The parents' education level was higher for Technician students and their parents worked with occupations requiring university degrees.

Virtual Design and Construction (VDC) is currently used more and more within construction design and planning as well as construction as a streamlining tool aiming to improve communication and decrease the number of construction defects. VDC is constantly developing, but what comes next? The augmented reality (AR) technology is currently not used within construction in Sweden but should be considered as the next step in line regarding the integration of reality and digital information. Using this technology design can become reality even before it?s actually built.The purpose of this study has been to carry out an inventory of the existing AR technology and its shortcomings, and also to identify possible applications within the construction phase.

The present study deals with task-oriented conversations between a person with hearing loss and a relative or friend. The purpose was to investigate how the participants in the task-oriented context co-construct understanding, and to focus on different kind of repair strategies that the participants may use to make the hearing loss relevant in the conversation. The method used was Conversation Analysis (CA). The material consisted of eight videotaped task-oriented conversations between a person with hearing loss and their significant other. Altogether eight persons participated in the study ? four of them had a hearing loss and the other four had normal hearing.

With the increased significance of information technology (IT) in today?s society the term ?electronic democracy? (e-democracy) has gained much importance within the democracy theory. Naturally, there are several competing views on how the technology should be used for democratic purpose. One aspect of this is the somewhat revitalized claim for direct democracy in accordance with the hypothetical opportunity to finally realize it as a democratic system. The ideal of direct democracy combined with the almost total credence in the potential of technology constitute the idea of a ?push-button democracy?.

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.