
Sökresultat:
3672 Uppsatser om Systems safety - Sida 19 av 245
Sänkt returtemperatur : Potentiell besparing i fjärrvärmesystem
Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.
Uppföljning och analys av Stockholms stads solcellsanläggningar
During 2007 the City of Stockholm installed five grid connected photovoltaic systems. The aim of this master thesis is to quantify the amount of produced energy and recommend routines to collect and analyse production data, to make production data accessible by the public and to gain experience for future installations.The total amount of produced energy until March 2009 is 227 000 kWh, with an annual rate of 150 000 kWh. The expected annual rate was 148 000 kWh.All system owners are positive about their plants and see economical benefits in scaling up such systems.The installations need very little attendance and maintenance, however it is recommended that an alarm function is installed for automatic feedback in case of a system failure. All future systems should be inspected during full operation to determine if the actual capacity is matching the installed capacity..
Utvärdering av digitala provtryckssystem
Six different Digital Proofing Systems from three different techniques have been evaluated as totechnique, printing quality, economy and usability. Digital proof from two paper qualities, coatedand uncoated, has been compared with references printed in offset, to see how good they match eachother. Only two Proofing Systems manage to print on reference paper. The other Proofing Systemsuse special paper for digital proof.Measurements and visuell judgement show that the Digital Proofing Systems visualise referencepictures with quite good quality. Proof optimised for coated paper visualise the colours with goodresult.
Hur min dyslexi påverkar mitt författarskap
The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.
Termomekanisk analys av svarvstål : Volvo Aero Corporation
Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.
Hur hanterar institutioner en miljö med blandade Operativsystem?
The purpose of this thesis is to investigate if there are environments that use
some kind of central authentication system within institutions/schools. The
hypothesis is that an institution not using a form of central authentication
service has more need for maintenance and as such is considered a higher cost
for the organization.
The gathering of data has been done through interviews with technical personal
at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the
technical background of the authors, and the system limited to discussing
Windows and UNIX operating systems, a discussion and analysis of the systems
working today has been done, with emphasize on the hypothesis..
Hybriddrift i stridsfordon, fördelar och nackdelar
Petro-electric IFVs (Infantry fighting vehicles) or hybrid-IFV?s are not a new phenomenon. During the 1900?s Germany as well as the U.S both tested vehicles constructed with hybrid technology. In spite of several identified advantages, no serving hybrid-IFV exists today.
Mikroproducenternas påverkan på Elinorr
The Swedish energy system will be influenced by many future changes, such as energy and climate policy objectives. The installation of more renewable electricity could increase by using solar energy. Over the recent years, grid-connected photovoltaic (PV) systems have increased dramatically in Sweden, partly due to various support systems and compensation models. These support systems have been designed to make it easy for individuals and businesses to invest in self-generated electricity and thus contribute to the transformation of the energy system.The introduction of a higher proportion of solar energy may in turn affect the Swedish electricity system. This could mean that the electricity companies will be facing a number of changes in the near future.
Utvärdering av insamlingssystem för hushållens farliga avfall
The collection of hazardous waste from the household around Swedish municipalities varies. 1% of the households waste is hazardous waste. It has hazardous features that can give bad consequences for the nature and human health if we don?t collect it and treat it. Therefore the law controls it, the municipalities have responsibility for the household waste.
The welfare of the laboratory mouse : comparison in development of mouse pups in three different individual ventilated cage (IVC) systems
Today the individual ventilated cage system (IVC-system) is a commonly used housing system for mice in research facilities. IVC systems have HEPA- filters and are designed to control both supply and exhausted air at cage level, as well as temperature and relative humidity in the cages. This creates an optimal environment for the mouse and at the same time a protection against the risk of cross-infection between cages and the outside environment. The aim of this study was to evaluate the health and welfare of breeding females and pups of two different strains of laboratory mice (NMRI nude mice and C57BL/6N) in three different kinds of IVC-systems; Arrowmight, Allentown and Tecniplast. The NMRI nude (Nu) females gave birth to 18 litters in Allentown, 16 litters in Arrowmight and 15 litters in Tecniplast.
Införande och systemanpassning av Process Engineer i målerifabriken, Saab Automobile AB
Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.
Framtagning av typgodkända formkonstruktioner : Med inriktning mot traditionell väggform
This diploma work was conducted in collaboration with the Swedish civil engineeringconstruction company Skanska Construction in Stockholm. Their interest is todevelop a number of type approved form constructions which can be used during theconstruction of concrete walls. Skanska focuses on improving safety on their projectsand both supervisors and workers have a need for approved form constructions inthe current situation.The study is focused on safety and the purpose is to facilitate the preparation beforethe form work can begin. By studying the literature of the subject and conductinterviews with employees at Skanska Construction, the understanding of the issueand knowledge will be increased.Literature studies, interviews together with production and design have been thebasis for a successful study. The work has resulted in three types of approved formconstructions to Skanska Construction and the drawings can be used of employees atthe company.
Äga eller leasa lagret i ett mindre handelsföretag?
Small companies have fewer resources which often result in an tendency to disregard administrative tasks. A factor that influences the company?s revenues is the control of its inventories. The purpose of the current study was to analyze which of the two options, leasing or owning your inventory, that could be justified from an economical perspective. Furthermore, the purpose was to describe the optimal inventory level for each option. To meet these objectives representatives for the company was interviewed and a thorough investigation process was undertaken, during which methodological problems were solved. It was found that leasing the inventory was the most expensive option for the company. Analysis demonstrated that optimal turnover inventory according to EOQ (Economic Order Quantity) would amount to 65,0 thousand Swedish Krona if the company leases their inventory in comparison to 56,0 thousand Swedish Krona if the company owned their inventory.
Automatisk rengöring av Primary Charge Roller : Invegon Equip AB
Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.
Inhysningssystem för tjurar : fallstudie
It´s important when you are about to build a new stable or just increasing your production that you choose the right housing system and that it fits your own farm. In this study I have put together facts about different housing system for fattening bulls in order to get a clearer picture of witch system is the most suitable for my own farm depending on the conditions I have. The background of this work is my own interest for breeding bulls and I will hopefully increase my own production. Due to this I wanted to learn more and increase my knowledge about different housing systems. Through a literature study I have found out the facts about the housing systems I find suitable for housing bulls.