Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

This thesis examines different methods for the cooling of data centers. Several means of cooling with the refrigeration cycle have been studied, as well as the feasibility of using free cooling in different parts of Sweden. In addition, the possibilities of transferring excess heat to a nearby district heating system were investigated. It was found that in all investigated cases except two, the data center could be cooled solely with free cooling for at least 300 days a year when only the outside air temperature was considered as a constraining factor. The limit was then set to 20 °C.The vast majority of all district heating systems in Sweden get little to none of their heat from other excess heat sources.

New forms of Information and Communication Technologies (ICTs) have become more influential in development contexts. The concept of ?The Digital Divide? points at a large division between rich and poor countries regarding access to ICTs. Critics say that the debate concerning this topic for far too long has focused mainly on the technology itself rather than social factors which impact social inclusion and development. Scholars agree that ICTs holds a tremendous potential, but how is this implemented in development contexts and how can it be used with more sensitivity towards local preconditions and social aspects?This paper aims to examine how ICTs are being used in the context of development within an India based organisation for women called SEWA (Self Employed Women?s Association).

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

Disinfection methods for drinking-water produced at the two water works of Stockholm Water Co are compared in this study. Three different nethods are compared; disinfection with chlorine gas, disinfection with sodium hypochlorite and disinfection with UV-light and monochloramine. The method used is Life cycle assessment, LCA. LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impact of a product system shroughout its life cycle. The environmental burden is compared for the three different disinfection methods.

With starting point in the increasing ill-health in Swedish working life today, in form of for example absence due to sickness and early retirement pension, and the knowledge that the working environment effects peoples health in a big extent, I found it very interesting to inquire into how people within the working life experience health promotion and how this can be developed. A qualitative method was used to receive a deeper understanding for the employees? experiences and data was collected through semi structured interviews with employees on a bank called Ikanobanken, in Älmhult. The result shows, among other things, that respondents find responsibility and the opportunity to influence the learning processes and development important. It also became clear that the respondents find participation, motivation, communication and safety essential factors when related to changes in health behaviours.

This study aims to examine the effect management control systems have on which goals health centers prioritize. The management control systems of one privately owned and one publicly owned health center have been studied through a qualitative case study. Robert Simons (1995) framework with four levers of control (diagnostic control systems, interactive control systems, belief systems and boundary systems) has been used to structure the study. For both health centers we found a conflict of interest mainly between the diagnostic control system and the beliefs system, where the diagnostic control system is biased towards quantitative goals and the beliefs system is mainly biased towards qualitative goals. However, despite the unbalanced levers of control the studied health centers have been able to reach a well functioning compromise between quantitative and qualitative goals..

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

In an environment, demanding both innovation and flexibility, higher requirements of competitiveness and productivity is a necessity. Changed conditions of today's working situations have resulted in an actualization of new ways and methods of working. This has contributed to a development of participating working processes in form of groups and teams. The purpose of these communal working processes is that they ought to result in an increased knowledge and understanding among the group members which in turns will generate positive results in the daily work. This drives the search for new knowledge and development possibilities to handle these changed working processes.

The climate issue is a significant question, and the problem is mainly caused by human activities. Everyone can help to counteract the enhanced Greenhouse effect by reducing the amounts of energy they use and by not consuming more products then they need.Schools are some of societies many consumers and therefore contribute to the Greenhouse effect. The School also has an important task; to teach and disseminate knowledge and information about the climate and the environment. According to the Swedish National Agency for Education, Skolverket, must all schools regularly consider the environment and sustainable development throughout the entire education process. Unfortunately, this is not the case for many schools in Sweden today.One of many tools that can be used to coordinate environmental work and initiatives, and also to make it more efficient, is environmental management systems.

The prime aim of this thesis was to investigate whether high or low iodine intake during certain periods of life was, or was not a strong risk factor for the development of canine lymphocytic thyroiditis (CLT). And secondly, if a high or low selenium intake in a combination with high or low iodine intake also may have an influence on that risk factor. To investigate this, a dietary questionnaire was sent out to dog owners. The dogs were selected from an ongoing genetic study of CLT. The questions investigated brand and type of feed during different life stages (puppy, junior and adult) and also if there were any use of dietary supplements.

This work is designed to monitor developments in the relationship between teacher and student in the school environment, but also outside, from the 1950s until today. The survey was based on four interviews with teachers in the same age, and based on their life stories. Their experiences range from student to novice teachers and a long working life until retirement. In addition, all four children has a parent perspective. The following issues have been focused:                      1.What factors have been crucial in teaching elevrelationens development from the 1950s up     to today?                      2.

Enligt Standish Group är det endast cirka 35 % av alla systemutvecklingsprojekt som avslutas på ett lyckat sätt när det gäller tid, budget och resurser. Inom systemutveckling är fastprisprojekt, där systemets kostnad är förbestämd, allt mer populärt. Dynamic Systems Development Method (DSDM) är en modell för utveckling som fokuserar på fasta resurser och tid med funktionalitet som den flexibla variabeln. Syftet med den här uppsatsen är att se om man kan driva fastprisprojekt med en modell som DSDM på ett sätt som gör det till en bra lösning för både beställare och leverantör.Min slutsats är att det största problemet med DSDM är att få beställaren att godkänna den som projektmodell. Ett annat stort problem är att många projekt med DSDM blir stressiga eftersom tiden är fast.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.