This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

C3LOOPS is an application for DJs and VJs based on surface interaction. A system is said to be based on surface interaction if it presents content on a two dimensional, endless surface that a user navigates through zoom, pan and incremental text filtering where processing is tightly coupled with the content without breaking the workflow. C3LOOPS is designed to encourage improvisation and collaboration. During improvisation changes occur rapidly. Allowing navigation through time as well as the two spatial dimensions of an interaction surface the possibility of unlimited undo operations opens up.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Det finns idag en enorm mängd webbplatser och antalet växer hela tiden. Samtidigt finns det många problem på webben. Genom att utveckla webbplatser som är lätta att använda och som passar användarnas behov kan man lösa många problem. Detta kräver en djup förståelse för vem och vilka användare är, vad de vill göra på webbplatsen och hur de vill göra det. För att få den här informationen görs användaranalys i början av utvecklingsprocessen.

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

As companies grow, their need for computing power will increase, which traditionally resulted in companies having to invest in more IT resources. Now, with cloud computing, companies can easily hire computer power over the Internet, on-demand. Cloud computing offers a highly scalable environment where companies can store data and host their services. This paper employs a qualitative study with interviews and literature studies to explore opportunities and challenges associated with cloud computing from a system developer perspective. The aim of the paper is to find out how cloud computing changes the conditions for system development. The paper contributes with four different opportunities and challenges that the system developer must handle to succeed in the world of cloud computing.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.

Authors: Martin Mederyd Hårdh, Frida Nygren, Daniel PaulssonTitle: Under Extreme PressureLevel: Bachelor of JournalismLocation: University of GothenburgLanguage: SwedishMethod: Quantitative content analysisPages: 38Politically motivated extremism is a common topic in the Swedish public debate ? and hence in Swedish media. The purpose of our study is to get an idea of how the media relates to the extremist groupings. On a traditional political scale, ranging from left to right, our study focuses on the Swedish extremists who figure on the outskirts of this scale; The ones who denounce the current system and opt for violence to change it.Violence is often an instrument used to get extreme political ideals in the public eye, and is seen as a threat to the Swedish democracy and the public in general. Both sides argue that the Swedish press is tendentious and treat the various extremist groups differently, airing their distrust for the media as a propaganda tool for these groups to establish themselves in the public debate.Our study consists of a quantitative content analysis where we study articles published in print by seven major Swedish newspapers.

This report is a part of a diploma work, conducted as a part of a Master of Science degree. The diploma work consists of a preliminary study, two case studies, a user study, a paper and this report. It was created at the Linköping University for the department of Science and Technology, in cooperation with Unilever Research in the UK, and partly with the EC founded project, Smartdoc IST-2000-28137. Hand-held, mobile devices like Personal Digital Assistances (PDAs) are becoming increasingly popular in today?s wireless world.

Syftet med undersökningen är att ta reda på om begreppet ?Tekniska system? tas upp i förskolan. Dessutom undersöks hur förskolorna arbetar med teknik enligt den reviderade läroplanen, Lpfö 98.Som metod användes enkäter där pedagoger satt i arbetslagsgrupper och besvarade frågor. Enkäten används för att få en bättre bild av hur ålder, kön, tidigare utbildningar och yrkeserfarenhet förhåller sig till kunskapen av teknikämnet.Undersökningen visar att alla förskolor använde sig av begreppet tekniska system på ett eller annat sätt i samtal med barnen, till exempel vid toalettbesök, samt frågor ?vart tar rören vägen vidare till reningsverket??Vidare framkommer det att fler fortbildningsdagar och studiebesök är önskvärt för att pedagogerna ska få en större vetskap om begreppet tekniska system.

The purpose of this Master thesis is to examine how college library managers perceive shelves of book reservation system in an integrity perspective. Privacy is an important part of everyday life in the society of today and according to some people, for example a former library lawyer in the Swedish Royal Library, these shelves conflicts with the Swedish law of Secrecy (Sekretesslagen 9 kap. 22 §). I am therefore interested in how they perceive this system: what weaknesses and strengths it has, why they implemented it, how they have interpreted this law. To answer this I have used a qualitative method called phenomenography and done interviews with five college library managers.

The study's aim is to create an understanding for the question why Sweden in 1921chose to create its own classification system for public libraries instead of adapting e.g.the Dewey-system which - at this time - was internationally we11 spread. It examines thesocial changes which proceeded the creation of the Swedish Library Association (SLA)in 1915 and discusses in depth the work of the committee appointed by SLA to createthe classification system. Special interest is also given to the relation between SLACSand the Dewey-system.The study shows that the main influence on the codttee's work was the formerSwedish tradition of classification practice. The Dewey-system was seen as inappropriateto adapt in the Swedish libraries because of the vast changes that wouldhave to be done, and the fact that the decimal notation was practically unused in anylibraries in Sweden.From a methodological point of view, the study tries to apply a critical hermeneuticalapproach as developed by Paul Ricoeur.The study contains an extended English summary..