This thesis has been performed at the system development company Verendus System AB, together with the home care company Basic Care Unit (BCU).The thesis has consisted of developing a web based informationsystem for BCU in which they can administrate their business. At the time of writing this thesis, BCU was using a windows-application to administrate their activities, which was both costly aswell as resulting in an unnecessary burden. The aim the thesis has thus been to create a platform-independent information system that simplifies and streamlines BCUs work by being user-friendly aswell as imposing some simplifying features.The students has been developing the system by the help of a work method they themselves developed. The method consisted of working in several iterations that each had several milestones. The method resulted in the students knowing easily when each iteration was finished or not.The thesis resulted in a working platform independent prototype.

This Master's Thesis describes the design of a new system where a digital signal processor has been added to an existing imaging system consisting of field programmable gate arrays. The new system will offer a higher degree of flexibility by considerably shortening the design time and make it possible to implement more complex algorithms than the existing ones. The choice of system architecture and a test implementation are discussed. The test implementation consists of a program for the digital signal processor and VHDL code for one of the field programmable gate arrays. The code for the digital signal processor was designed for testing on an evaluation board from Texas Instruments.

A method for equine intra oral radiology has been tested. In the study, both a digital system with an intraoral sensor connected to a laptop and a system utilizing image plates and digital developing was tested, initially on cadaver sculls and finally on sedated horses. The digital sensor was not considered viable for this purpose, while the system with image plates and digital developing worked very well. Two different techniques, i.e. parallel and bisectris, are suggested for the best visualization of different parts of the teeth. Intra carious injections of Mixobar oesophaghus contrast fluid was found useful when evaluating the extent of carious lesions. Compared to extra oral radiology, the new method had several advantages and can be used both in clinic and field practices..

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price. They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.

AbstractConcrete foundation slabs are usually exposed to unilateral drying during the curing process. The unilateral drying causes an axial shrinkage and a concave curvature of the construction. The curvature results from the fact that the upper part of the slab is drying and shrinking faster than the lower part. This is called gradient shrinkage.A problem occurs when the slab is considered fully restrained by adjoining structural parts. The deformations caused by axial contraction due to the constant part of the shrinkage and the curvature caused by gradient shrinkage of the slab are then prevented by the fact that the slab is fully restrained.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

Dagens teknologiska samhälle ställer höga krav på människan, bland annat gällande att processa information. Vid utformning av system tas det numera vanligtvis hänsyn till människa-datorinteraktionen (MDI) för att erhålla en så hög användbarhet som möjligt. Affektiv Informatik, som är ett utvecklat sätt att förhålla sig till MDI, talar för att utveckla system som både kan uppfatta och förmedla emotioner till användaren. Fokus i rapporten är hur ett system kan förmedla emotioner, via dess färgsättning, och därmed påverka användarens emotionella tillstånd. En kvantitativ undersökning har utförts för att ta reda på hur färger kan användas i ett system för att förmedla känslouttryck till användare.

In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

Permaculture is a design system that aims at developing sustainable human settlements and self-maintained agriculture; it may also be used for community planning. The design system of permaculture aims at mimicking a natural ecosystem; this gives the advantage to make use of all the connections and mechanisms that exist in such a system.The purpose of this bachelor thesis was to compile and spread scientific information regarding five different themes within the areas of ecology, environmental science and permaculture. This was achieved through cooperation with the permaculture inspired Ecovillage Suberbyn in southern Gotland. Information about the central parts of a permaculture ecovillage was used as material for a series of signposts that will be located around the ecovillage Suderbyn. The five selected themes were: An overview of permaculture, The forest garden, The pond, Composting and The use of human excrement and urine..

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

A new phonological test, LINUS, for Swedish-speaking children between the ages of three and seven, has been developed at the speech and language pathology department at Linköping University. The aim of the present study was to create a reference manual for the long version of the new test. The participants in the present study were children between the ages of five to seven in a medium-sized municipality in the Northern part of Kalmar County, Sweden. In total, 124 native Swedish-speaking children (58 girls and 66 boys) with typical language development participated. The children were divided into two age groups, 5;0-5;11;31 and 6;0-6;11;31 years.

Innehållshanteringssystem används för att hantera innehåll och det finns många system att välja på. Detta arbete har fokuserat på fyra innehållshanteringssystem för innehåll på webben. Det är systemen Drupal, Joomla, Polopoly och Wordpress. Syftet var att inhämta teoretisk och praktisk kunskap om dessa system och besvara huvudfrågeställningarna om vilka inbyggda funktioner som finns, hur anpassbara systemen är, hur de olika systemen är att arbeta med för en utvecklare och hur anpassade systemen är för webbplatser med mycket trafik.Det jag kom fram till var att Drupal är ett mycket väl utbyggt och omfattande och anpassbart system där det går att utnyttja mycket tredjepartstillägg och anpassa den efter egna önskemål. Joomla är ett system som innehåller mycket inbyggd funktionalitet och det finns mycket tredjepartstillägg att tillgå, men anpassbarheten är dålig.

Organisations constantly live under the potential threat of events and accidents that seriously could harm the organisation. Forsmarks Kraftgrupp AB, the company that this master thesis focus on, is in no aspect excepted from this threat. Through an early identification of near misses and the taking of corrective action in use, Forsmarks Kraftgrupp AB has managed to reduce the likelihood and the consequence of events and accidents. The purpose of this master thesis is to evalutate Forsmarks Kraftgrupp AB?s operation experience process on the basis of IAEA?s and WANO?s requirements within the field of operation experience and to develop a usable system applicably within the field of operation experience.The thesis is divided into two parallel tracks, where one is the evaluation of the operation experience process and the other the design of a usable system, applicably within the field of operation experience.