This study is an evaluation of the runtime watch function in a OEE software, knownas ProTAK. OEE stands for Overall Equipment Effectiveness, it?s a way to measurethe factories process efficiency. The runtimewatch function allows the user to setup and monitor certain critical objects that are of importance for the pulp and paper process at the mill. The data from the runtimewatch can be correlated towards the suppliers specification for the components.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

Den här rapporten har som syfte att utreda vilket eldistributionssystem för offshoreenheter som sparar mest vikt och utrymme. De två elsystem som jämförs är GVAs standard system och Siemens Blue Drive System. Rapporten innehåller en teoretisk bakgrund för båda systemen och dimensionering av systemens kraftkablar samt beräkning av kabelvikter och komponentvikten för systemen. För att uppskatta kabel- rutter och längder kommer ritningsunderlag för GVAs offshoreenhet 7500 att användas.Resultatet visar att GVAs standard system är det eldistributionssystem som har den lägsta totalvikten med 168 ton, GVAs standard system har en vikt som är 101 ton lägre än Siemens Blue Drive System som har en vikt på är 269 ton. GVAs standard system har en lägre ström vilket gör att ledararean blir mindre och i med det blir kabelvikten mindre.

This thesis presents and evaluates a project, undertaken in 2001 by a librarian the writer of this thesis and a teacher. We met with a number of adults with reading and writing disabilities, and presented and discussed books and experiences of reading, with the aim to increase their joy of reading, as well as finding out more about our own ways of co-operating with each other across our professional borders. The documentation and evaluation emphasizes on the process and the results of the project, and on our own participation, by asking the following questions: How did we carry out the project? What obstacles did we meet? What went well/wrong? What did we achieve related to our goals? In order to illuminate the project from different angles, consequences of reading and writing disabilities for adults are discussed, as well as the specific nature of adult education and projects more or less related to ours. Action research is chosen as a method, because it allows the process of the project, and our own learning process, to be exposed.

In order for a business management to be able to make informed decisions for their companies need enterprise management system regularly checked by internal audits. The aim of purpose with this work was to develop a working manual for integrated internal audits. This was done through a litterature study and interviews with auditors. An in-depth interview was conducted with an experienced auditor to get more understanding and depth of the internal audits process, and how the manual could be designed. Discussions were held with the person responsible for environment, health and safety at Swedspan Hultsfred to adjust the manual to the company?s internal management system.

The purpose of this essay is to do an ecocritical reading of Vilhelm Moberg?s The Emi-grants from 1949. By asking and answering the three following questions; How does a system present itself, What are the different reasons for emigration; Why does differentsystem fit some well and some not.By using two articles from Green Planets - Ecology and Science Fiction to illus-trate two different views; Different parts value in an ekosystem and The Ship as an ecosystem. I have also created, based on the literary text four different terms concern-ing the dynamic system; Stable, Static, Unstable and Collapsing systems. I have found that all system goes through changes, some drastic, that changes the way the parts of the systems fit with in it.

This Thesis aims to explore how to integrate an IT-system for facilitating anorganizations work with Continous Impprovements.This is done here by examining and analyzing the process within a handful ofcompanies who seem to have been successful with their own implementations. Thestudy is focused on the implementation of one particular system, "System C2".Simliarities and differences between the companies, and the established rule of thumbfor these kind of activities are focused upon. This to emphasis how another actormight emulate some of the apparent success.Part of the core question is found in the title, since Continous Improvement is oftenseen as a relativly low-risk activity, is it then also possible to take a low-risk slow pathto the implementation of such a system in the entire organization?.

There are few legally protected gardens in Sweden, and those that are protected are mainly from the 17th and 18th centuries. All time periods have the same value and more modern gardens therefore needs to be protected. Evaluating parks is, however, complicated since it do not exist any methods. One environment from the 1960?s that has not been protected is Televerket in Farsta, Stockholm. The facility has been classified as worthy of preservation by Stockholm City Museum and has received the Kasper Salin Prize.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

In healthcare settings, administrative routines have been made more efficientthrough digitalization of information and the introduction of stationary computers.This situation is especially true when it comes to radiology, where pictures,referrals and patient information now is completely managed by advanced stationarycomputer systems. However, studies have shown that these rationalizationsdo not support flexible and mobile work routines.PocketRIS is a prototype illustrating a mobile terminal for radiology that hasbeen designed to simplify workflow and reduce the cognitive workload of healthcarepersonnel. PocketRIS includes a visualization of the clinicians work situationincluding a personal referral list that can make the user attentive of importantevents.Contextual Design has been used to elicit the basic system requirements for thesystem; 19 contextual inquires was conducted with physicians, nurses and assistantnurses at two different radiology clinics in Sweden during six days. The purposeof the study was also to identify the groups that have the greatest need for amobile terminal. The study was concerned with design and evaluation of differentsolutions with healthcare personnel.The result shows that physicians and assistant nurses have the greatest need ofa mobile terminal.

The purpose of this study was to investigate how young adults withunilateral cleft lip and palate assess their own speech and communication,and to let speech and language pathologists make a perceptual analysis ofthese individuals? speech at the age of 19 years. An additional aim was toexamine the relationship between these two different ways of evaluation.Data was collected through perceptual analysis from audio recordings and byusing a self-report questionnaire based on the ICF-structure (InternationalClassification of Function, disability and health). Altogether, 33 peopleparticipated. One third of the participants had no speech deficiencies.

The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

The aim of this thesis is to investigate the opportunities of classification of web pages. Two classification systems are compared; a library classification system traditional and a system that is developed for use on the web new. UDC is chosen to represent the traditional systems, and Yahoo! represents a so called new system. UDC is used by NISS Directory of networked resources, which is a directory that uses the system for organisation of electronic resources. Both systems are analysed from two different perspectives, a multidisciplinary and a timeperspective.

Background: The most common reason for veterinary care in horses is lameness. Lameness in riding horses is often difficult to evaluate and in many cases may require riding to come to a diagnosis. Evaluation of lameness has proven to be very subjective and depends on the examiner. There is a need to evaluate ridden horses in an objective way.

This master thesis was written for Arla Foods and the result of the thesisserves to gain Arla Foods in its work with chemical hazardous and to bringnew academic results. The thesis aims to create a common methodology forrisk analysis with the handling of chemicals.The theories displayed in this thesis focuses on different risk managementmethods in order to build up a framework out of which a risk management toolwas created. The main primary data source consists of interviews held withemployees within Arla Foods at different facilities.The risk management tool can be found in appendix K.Available recommendations for how to evaluate risks with chemicals can befound at appropriate government agencies. These recommendations aredrawn up to suite small and medium enterprises and therefore are to narrowto make a good foundation for analysing chemical risks at large companies.With the legislation and government demands in mind, a tool has beencreated to fit a large company?s needs when managing chemical risks.