Today there is an even higher demand on IT-projects success rate compared to a few years ago. IT-projects must be handled more efficiently and result in a more profitable investment. In order to make the handling of IT-projects more efficient and create profitability the developers must have a broad understanding of the IT-projects characteristics and which factors that affect the result of the projects. Changes within IT-projects are often carried out through the development of a system. Since this change is more common when it comes to IT-projects it is important to handle risk and change within these kinds of projects in order to prevent and avoid uncontrolled changes.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

Title: This is not Africa - West African teaching methods in Sweden. This is a work of "translation". The study started with a musical journey to Guinea, West Africa. It was a field study where I had the opportunity to open my senses towards another culture and another kind of music. I found another learning tradition and decided to try to bring it with me back to Sweden, into the Swedish school system.

Denna rapport aterger arbetsprocessen kring att utvärdera geograskatjänster, och att utveckla karttillämpningar för nätverk av rikstäckande omfattning. Arbetet utfördes pa plats hos DGC, en datakommunikations-, tele- och nätoperatör som distribuerar kundförbindelser i hela Sverige där konsumenter ansluts till stamnätet. Uppgiften bestod av att utvärdera möjligheter till att slå upp koordinater för etablerade kundplatser, rita ut accessnätet i ett kartgränssnitt och ta fram ett eller flera stödverktyg för bland annat orderprocesser. Användningsfall utifrån önskemål, arkitekturmönster samt analys av yttre leverantörers tjänster för geocoding avgjorde hur det slutgiltiga systemet var utformat. Mjukvaran som utvecklades integrerades både i bentliga system och som ensamstående tillämpningar.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

This assignment has been performed at location and commissioned by AttenditAB in Jönköping. The task has been to develop a client/server system to accessdata stored in SQL databases where the client application is developed to run onregular cellular telephones. The importance has been to develop as reliable mobilecommunication as possible. The functionality that is demanded upon the mobilecommunication is:? Secured for future versions? Interoperability? Data should not be bugged, modified or disappearunnoticed? Resource efficientWe have achieved these demands by developing our own protocol that is on top ofthe TCP protocol.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The purpose of this study is to explain the development of the first higher technical education in Trollhättan, with the added perspective of Trollhättans strong industrial profile as a city. The interesting thing being that the city did not try to first and foremost get a regular higher education, but a technical higher education instead. The study describes the political twists and turns the question took from its most early stage in the year 1940 and how the city's industrial profile did indeed have an impact on the development of the first higher technical education. Especially because there was a need for educated engineers in the city, as well as the country of Sweden in large during this time. The study also tries to explain the problems related to such a development, primarily by describing the lack of sufficient housing for schools during the 1950's, this meant that the higher regular school and the higher technical school had to cooperate in finding said housing.

Arbetet undersöker grafikkortets lämplighet att tolka L-system i realtid. L-system är ett strängomskrivningssystem som beskriver strukturen hos botaniska former. Lsystem tolkas med hjälp av sköldpaddstolkningen för att få en geometrisk tolkning. För att utvärdera om grafikkortet är lämpat att tolka L-system i realtid har två system implementerats. Det ena systemet tolkar L-system på processorn och det andra systemet tolkar L-system på grafikkortet.

AbstractIn my work on language development in preschool the purpose was to examine how and to what extent the pre-school supports children with special needs in their language development. Trough qualitative interviews with four preschool teachers, I wanted to see how they work with language development in preschool. In the study, Main questions asked in the inquiry :How do teachers and support children?s language development?What techniques, resources and tools available to facilitate language development? The conclusion that I made from my inquiry is that the primary language stimulation methods teachers use to encourage children?s language development are rhymes telling, books reading and song singing based on active selection of pieces that match the children?s maturity level.And how they are using different language stimulation techniques Karlstad model, TAKK (Signs of augmentative and alternative communication) and TRAS (Early registration of language development) to promote children?s language development. Keyword: Language development, language stimulation, treatment, communication, methods..

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

Organisations and projects use CSCW/Groupware systems for collaboration purposes. These systems and applications are in many cases using a non-transparent GUI, witch is also hard to learn. This paper present a novel system that aims towards being transparent and easy to use. This system, called CollMX, will be evaluated and different ideas for future development will be presented.  The evaluation and ideas are generated by an empiric evaluation and research in different areas related to CSCW. The research does not only focus on the area of CSCW, but also extends towards the Web 2.0 and ideas about awareness..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This thesis was developed as an assignment from Ludosity Interactive where the goal was to develop a copy of the Xbox Live Indie Games-marketplace from the Xbox 360. Ludosity Interactive had a necessity to easily test a game's attractiveness to potential customers using testing people from outside the company in a simulated Xbox Live Indie Games test environment; excluding this developed system there is no other way to do such an analysis without actually releasing the game on the Xbox Live Indie Games marketplace and then analyze the resulting sales from the product.The finished system had to be similar to the original system to the degree that a user could see past the interface itself and use the system just as he/she would have used the real marketplace. It also had to be easy to change and add games to the system so that Ludosity Interactive easily could show the games and the data that they deemed interesting for their tests. The final product was developed using C#, XNA and XML together with an Agileinspired development method in combination with Pivotal Tracker. This report describes how this product was developed..

This examination paper is a lead in the educational program Industrial Management at Jönköping University. The paper itself contains an analysis of the warehouse organisation and its efficiency at the furniture company Voice AB in Torsvik, just south of Jönköping, Sweden. The report also contains propositions to raise the level of efficiency in the company warehouse and warehouse management.In the investigation of the warehouse a number of possible improvements were found. Examples are lack of a system for labelling shelves and racks, lack of an efficient location system and development possibilities in work routines. For the empirical investigation both qualitative and quantitative methods ware used.