Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

There is a lack of published material regarding designing graphical user interfaces of so called integrated video uploading services. The term integrated video uploading services refers to homepages that do not have video uploading as its primary purpose but which still offers that service to its visitors. The aim of this thesis was to improve the amount of published material about designing graphical user interfaces for integrated video uploading services. This was done by performing a literature study to find general design guidelines which can be applied to design of integrated video uploading services. Thereafter the functionality and design of dedicated video uploading services was analyzed.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

Minimizing power consumption is a critical part of many embedded design projects. Thechallenge is to limit the power consumption of the system and at the same time providesatisfactory service to the user. With regards to microprocessors, the main way of limiting powerconsumption during program execution is to adjust the frequency and the voltage at which theprocessor operates.To enable the implementation of real-time scheduling with support for dynamic voltage andfrequency scaling, an exhaustive study of the Freescale i.MX31 embedded microprocessor isperformed. Specifically, the power consumption relationship to all relevant frequency andvoltage settings is investigated. In addition, to enable frequency and voltage scaling in a real-timeenvironment, a complete timing analysis of proposed voltage and frequency scaling methods isperformed and their suitability for use in real-time systems is evaluated.To integrate voltage and frequency scaling capability into OSE RTOS, a software module hasbeen developed for this operating system.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

In this project an iPhone application for storing food and drink experiences was developed with focus on an easy interaction design. The already existing market of similar applications were studied and evaluated to extract their positive and negative features. Interviews with experts within the food and drink business where made in the pre study to get a good perception of how to divide and categorize the sections in the application. To optimize the usability, workshops with potential users with different technical experiences where continuously held during the development of the design.During the development two variants of development environments where evaluated. The final result of the application was developed in the environment that made the best impression and seemed to be the best alternative.The resulting product has a thought out design meant to be easy to understand, even for the first time users.

As companies grow, their need for computing power will increase, which traditionally resulted in companies having to invest in more IT resources. Now, with cloud computing, companies can easily hire computer power over the Internet, on-demand. Cloud computing offers a highly scalable environment where companies can store data and host their services. This paper employs a qualitative study with interviews and literature studies to explore opportunities and challenges associated with cloud computing from a system developer perspective. The aim of the paper is to find out how cloud computing changes the conditions for system development. The paper contributes with four different opportunities and challenges that the system developer must handle to succeed in the world of cloud computing.

The thesis is a case study that deals with public space based on how people use them. Public spaces are an important part of our city life and everyday life. Quality public spaces and places are due to its design and use, which are the primary aspects of this study. Hässleholm has been the location for the case study inventory items. Five different methods have been the basis for the study, and through them it has been possible to study what makes a room usable and unusable and what criteria is necessary for people to want to stay in the public rooms.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

I denna artikel ämnar vi, genom att studera olika modeller med stöd för olika designsituationer, att skapa en modell som specifikt stöder design av crossmediaproduktioner då en sådan inte existerar i dagsläget. Genom att själva arbeta med en crossmediaproduktion för Non smoking generation fick vi chansen att på nära håll studera designprocessen och kunde på så sätt identifiera dess beståndsdelar och aktörer. Baserat på dessa och i kombination med teorier om design och crossmedia kunde vi skapa en egen modell som kan stödja framtida designers och producenter i deras arbete med designen av crossmedia..