Today's high oil prices and more stringent environmental requirements have led to that manufacturers of mobile construction equipment try to make their products more energy efficient. With this in mind a project about hybridization of hydraulic systems has been formed. The purpose of this project was to analyze the savings that can be achieved by hybridization of hydraulic systems. A reach stacker truck (Kalmar DRD450-80S4XS) were simulated in some load cases with conventional hydraulic systems and with three types of hybridized hydraulic systems. Different parts of the hydraulic systems were also analyzed separately.

This report describes the process of translating Russian financial information in accordance with Russian Accounting Standards to IFRS, International Financial Reporting Standards. The author describes the two regulatory frameworks and reveals a number of risk factors in the process. These risk factors may affect the reliability of figures from Russian companies. The conclusion states some recommendations on how these risk factors can be managed..

The aim of this study is to analyse and investigate a rather new field of LIS studies, i.e. link analysis which is a part of webometrics. Webometrics has been described as the quantitative study of web based phenomena drawing on bibliometric or informetric methods. Link analysis has its counterpart in citation analysis within the field of bibliometrics. The questions the study investigates are if webometrics can provide LIS with new knowledge and if there is a place for webometric studies in LIS research.

This essay is a meta study of essays published at theInstitution of Library and Information Sciences at theUniversity of Borås in 2009. It aims to answer the followingquestions:What attitudes about new media can be found in essayswritten within SSLIS and are there traces of media panic inthe discourse?The theoretical framework of the essay is based on a theoryof the concept of media panic as defined by Kirsten Drotneret al, and the concept of moral panic as defined by StanleyCohen.The method used is derived from Klaus Krippendorff?sideas on content analysis, as published in the book ContentAnalysis. The method in this study uses computerizedsearches for target words. The target words used were:Internet, web, e-, blogg, facebook and twitter.

The aim of this paper is to describe and explain which policy instruments for human rights (HR) the United States and the European Union use towards Burma and to examine the priority given to HR in their respective foreign policy. From the results of an empirical analysis this paper seeks to analyze the US and the EU as powers in the international system and aims to explain their behavior from this theoretical perspective. From the theoretical approaches used I conclude that these actors act in different ways regarding the Burmese issue. This is partially due to the structure of the international system. Both actors primarily use different forms of diplomatic tools and sanctions to try to force change for HR in Burma.

The purpose of this essay is to analyze the EU discourse in the Swedish media. The questions that the analysis seeks to answer are; what image of EU is portrayed in the Swedish media? To which degree does the EU discourse fulfill media?s ?news values?? And what are the potential effects of the discourse on EU?s reputation? After several demarcations, I chose 8 articles form Sweden?s four largest newspapers to base the analysis on.    The theoretical and methodical structure behind this analysis is the theories and practices of Fairclough?s critical discourse analysis. Added to the theoretical structure are also theories about reputation and theories about news values. The method used in the analysis is a modified version of Fairclough?s three-dimensional model of critical discourse analysis.

Folkhälsovetenskapligt program.

This thesis deals with the concept of soft balancing, traditionally defined as the diplomatic means of restraining a dominant state's ability to exercise its military power. As the dominant power in today's unipolar system, the United States, and other states? behaviour towards it, is the focus of analysis. The aim of this thesis is to explore the possibilities of developing the concept of soft balancing so as to include strategies to restrain also the political and economic capabilities of a dominant power. The thesis also considers the possibilities of soft balancing that small states ? to a large extent overlooked in existing theories on the subject - can possess.As a state with policies that aim to reduce the U.S.

In order to maintain a high safety level at a nuclear power plant it is important not only to measure the reliability of the components and systems of the plant, but also to investigate how the plant responds to human actions. One of the most hazardous situations in managing a power plant is fire occurring in critical areas. This study concerns the prospect of the local fire brigade to suppress a fire that has started in one of the most critical rooms for maintaining high reactor safety. The model created gives an indication on the possibilities of succeeding in suppressing a fire. In order to get a more reliable fire fighting the following advice are given:- Let the fire brigade go rounds in the plant together with the personnel, during which recommended fire suppressing methods are determined to avoid long preparation time in an actual situation.- Prepare rooms with two subsystems to make them partly with no voltage.- Give the fire brigade better feedback from actual events on nuclear power plants.- Education and training in suppressing fires in electrical equipment.The probabilistic safety assessment strives to be as realistic as possible.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .

The purpose of this essay is to do an ecocritical reading of Vilhelm Moberg?s The Emi-grants from 1949. By asking and answering the three following questions; How does a system present itself, What are the different reasons for emigration; Why does differentsystem fit some well and some not.By using two articles from Green Planets - Ecology and Science Fiction to illus-trate two different views; Different parts value in an ekosystem and The Ship as an ecosystem. I have also created, based on the literary text four different terms concern-ing the dynamic system; Stable, Static, Unstable and Collapsing systems. I have found that all system goes through changes, some drastic, that changes the way the parts of the systems fit with in it.

In Sweden plans to build high speed railways have been around since the early 1990s and the planshave developed to be more precised since. The future Swedish high-speed rail network is supposedto consist of two lines. Götalandsbanan; from Stockholm to Gothenburg, and Europabanan fromJönköping through the Öresund Region to Hamburg.The description of the aim to build high-speed railways in Sweden has in former reports always beento achieve rapid passenger traffic between big Scandinavian cities and Europe. There are almostnothing mentioned about the possibilities of high-speed transports of cargo on these railways. Thisstudy aims to clarify the freight transport market for Götalandsbanan and Europabanan.Today there is only one transport system with high-speed freight trains.

This Thesis aims to explore how to integrate an IT-system for facilitating anorganizations work with Continous Impprovements.This is done here by examining and analyzing the process within a handful ofcompanies who seem to have been successful with their own implementations. Thestudy is focused on the implementation of one particular system, "System C2".Simliarities and differences between the companies, and the established rule of thumbfor these kind of activities are focused upon. This to emphasis how another actormight emulate some of the apparent success.Part of the core question is found in the title, since Continous Improvement is oftenseen as a relativly low-risk activity, is it then also possible to take a low-risk slow pathto the implementation of such a system in the entire organization?.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..