Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

De flesta företag använder sig av något slags system för att kontrollera arbetsflödet. Dessa system används av alla på företaget och därmed är det viktigt att undersöka, hur medarbetarna upplever detta system. Med en explorativ utgångspunkt gjordes en enkätstudie på ett företag i Västsverige. Resultatet visade att deltagarna, förutom några få procent i stort sett hade liknande positiva upplevelser. Ingen skillnad fanns heller mellan grupperingarna ung/gammal eller antal år de arbetat på företaget.

Precis som titeln avslöjar handlar rapporten om att utveckla ett system som kananvändas vid utvärdering av övningsmoment. Idag saknas ett liknande system somvara ett stöd för hemvärnets instruktörer vid utvärderingar som har till syfte att ökaförståelsen hos övande personal. Systemet består av en mobilapplikation och enwebbapplikation. Mobilapplikationen loggar hur en soldat har framryckt under ettövningsmoment och sedan sammanställs data från en eller flera mobilapplikationer ien webbapplikation där data visas på en interaktiv karta. Kartan ger möjlighet attstega sig igenom händelseförloppet.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

This is a thesis project in the field of information technology which begins by evaluating existing food price comparison systems and subsequently aims to design an improved, web based system for said purpose. The system features interfaces for price reporting, price comparisons as well as various search and review functions. The objective is to create a system able to compete with existing price comparison systems, which requires careful selection of products that can be found in all foodstores that also represent different households; a user-friendly price reporting and price comparison interface and an efficient tool for ensuring the validity of reported prices.The designed system features a more accurate formula for calculating average prices in events where the real price is missing; a more reliable security mechanism forv alidation of reported prices and a more comprehensible interface for viewing price reports, reporting prices, reviewing stores and products in comparison with existing systems. The system does, however, suffer from some optimization issues primarily in the form of inefficient database modeling; SQL queries and JavaScript code although testing has shown that these shortcomings do not hamper overall performance to such a degree that usability is compromised. Further usability testing performed on the system with five test subjects shows that a high level of overall user-friendliness has been achieved even though some special features, such as the detailed report containing price information per product for each store need to be improved.It is not possible to say at this time whether or not the designed system will be able to compete with existing ones or if the very concept of food price comparisons per se is viable in terms of profitability and marketability.

Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

The aim of the project is to develop a tool for a management system at the advertising agency ofConfetti. The company has during a longer period of time felt a need of introducing a quality and environmentalsystem but have a lack in resources of knowledge, time and money. Their goal is to have aconcrete documentation which describes their quality policy and the function of the activity.The work has been performed by mapping and analyzing the processes of the company according tothe process model with focus on one pilot process. New routines have been developed and documentedin a management system.Confetti would like their management system to fulfil the ISO-standard so that they eventually inthe future can be certified. Therefore a literature study has been done according to management systemsand standards.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

Detta examensarbete vänder sig till personer som är intresserade att använda nya miljövänligametoderna för elproduktion eller personer som redan använder små vindkraftverk ochsolpaneler med behovet av en extra energikälla i små stugor eller avlägsna platser där tillgångentill elnät är omöjligt. Syften i detta arbete är först och främst att bygga ett system förelproduktion med hjälp av en cykel. Sedan bestämma mängden av elektrisk energi en personkan alstra med systemet. Slutligen svara om detta system skulle kunna använda som ettstödsystem för elproduktion i småskalighet.Den första målsättningen är att utforma ett system med användning av kraftelektronik där denkraften som genereras matar lasterna. Den mekaniska delen kommer att konstrueras som en delav energikällan, därefter kommer det att utformas en kontroll för att styra effekten viaelektroniska komponenter, de elektriska belastningarna matas av systemet, kommer attsimuleras.

Studien underso?ker fenomenet na?that pa? bloggar med fra?gesta?llningen ?hur ser processen fo?r na?that pa? bloggar ut?? Fo?r att kunna besvara fra?gesta?llningen letade vi data pa? olika bloggar i form av blogginla?gg och kommentarer. Da?refter genomfo?rdes fem intervjuer med fyra blog- gare, samt en representant fra?n organisationen Friends. Da? vi till en bo?rjan bara hade ett fe- nomen som vi ville titta na?rmare pa?, valde vi att anva?nda oss av grundad teori som metodo- logiskt angreppssa?tt.

When constructing a new house many questions appear, from architecture to decisions regarding installations. Sweden is situated in a cold part of the planet and questions regarding which heating system to install face everyone who decides to build a new house. This thesis describes a construction solution of a villa in Kiruna. The extended essay analyzes which heating system is most suitable for the construction. The options are geothermal, district and pellet heating systems.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

In cooperate with Asko Cylinda we have developed a new heat system too short the process time and reduce the energy consume in a dishwasher and still have it too be a class AAA. The environment and quality is important for the company too still be the number one on the market, If they want too keep that position the product developed of new innovations will be very important. The systems we have developed are more effective and reduce energy up too 25 %. The process time is reduced too less than two hours, from the today two and half-hour. The solutions are too heat up the rinse water and the dishwater at the same time, with a new heating system and it make are solutions unique and effective. Its good for the dish and the environment.

How should a fair income tax system be designed? Since Estonia became the first country to introduce a flat tax on incomes in 1994, this question has been in focus of public debate. The aim of is this thesis is to show that a flat income tax system, combining a proportional tax rate on all incomes with an allowance exempt from tax, is consistent with the demands of justice. In order to achieve this I construct a two level argument using normative method. The first part consists in the justification of a specific ethical theory which is derived from to notion of human dignity.

The most common way to treat wastewater in Sweden today is by a combination of an activated sludge process and a chemical treatment. These processes are not very energy efficient and may not be the most environmentally friendly. That is why it is interesting to evaluate new alternative methods to see if they can be less harmful to the environment and help to a lower resource consumption. New techniques are tested in a pilot installation at Hammarby Sjöstad, Sjöstadsverket. To be able to evaluate these techniques in a wide perspective system analyses are conducted where different impacts can be considered, advantages and disadvantages in the systems.Five system structures for water treatment have been constructed in Matlab/Simulink in this study.