This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

The exclusion of visually impaired from the information flow presented to us through signs was what led me into this project. With a growing amount of information being presented to us on signs and digital information surface the need of communicating this information in a way that could be read by visually impaired is evident. Looking into different ways of communication, my goal was to create something that filled the need of the visually impaired without branding them as disabled. Having a close relative with bad eyesight is became evident on how much it limited her in her everyday life, not being able to navigate herself without the support of her husband. Through interviews with her and others with varying diagnoses I reached an insight in their situation. To my surprise they still favored a visual form of communication before an auditory or tactile form, because it?s easy to survey and quick to interpret.

Mobile technology is developing quickly and becomming a part of daily life and communication. Bluetooth Low Energy is presented as a new way of mobile interaction. However there are not enough studies in this field on the interaction between mobile devices and the physical world. In order to understand user needs, and to encourage users to interact, we simulated an interaction process through designing and testing a prototype in a specific indoor environment. Prototype effectiveness and main characteristics for future mobile application was evaluated through a qualitative user study with 20 participants who interacted with our prototype..

This thesis treats the normative power of the European Union and its affect on Macedonia. The main purpose has been to look closer with the use of the application of Ian Manners theory of normative power on the Macedonian case. The focus will be to answer the following questions: Does the European Union act as a normative power in relation to Macedonia, if so, how are these values diffused? Has there been any effect of the spreading of these values? Based on six interviews and the available material of European Union strategies for the Macedonian membership I have attempted to understand to what extent the European Union?s normative power has had an influence in Macedonia. The result of my analysis is confirmation of the European Union as a normative power in Macedonia and the understanding of the methods of application..

Vi ser en förändring i hur vi använder applikationer. Från att tidigare varit associerat till en dator och begränsat till ett par operativsystem finns de numera överallt. Fler plattformar innebär att man måste utveckla en applikation till var och en av dessa. Detta gör att utvecklingstiden och kostnaderna ökar och efterfrågan av crossplattformlösningar i form av webbapplikationer har därför ökat. Vi tittar närmare på hur det går att använda sig av HTML5, och övriga tekniker som en modern webbläsare har integrerat stöd för, för att utveckla webbaserade applikationer. Vi tar reda på om det finns några hinder eller begränsningar i detta och om det finns några fördelar i att använda webben som plattform. Resultatet indikerar att med de nya tekniker som är på ingång kan man utveckla webbbaserade applikationer med prestanda motsvarande Java eller C#.

In this Bachelor thesis I explore sound and room as elements in design of user interfaces, both theoretical and practical in a specific application domain, to identify some of the advantages and disadvantage associated with these elements. As application domain I studied email clients and their usage at home amongst students at Blekinge Institute of Technology. In the study I found an activity, which seems to be highly distributed in the physical room where the user is located. The activity was notification of email and could take place in an arbitrary location of the home. I then augmented this activity with ideas from my theoretical assumption about room and sound.

This paper analyses what effect an application of a specific poststructural feminist theory has on the Swedish classification system SAB. The purpose is to study if it is possible to open up the current representation of gender towards a more multiple one. The study is both theoretical and empirical. The theoretical part include a short presentation of both classification theory and feminist theory. The study also presents the critic that poststructual feminists submit.

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

During the past years Building Information Modelling (BIM), which is a digital way to work, has begun to spread amongst the parts of the construction process. At the construction phase the larger companies has started using the new way to work. This expansion has not been developed amongst smaller companies leading to the purpose of this report, to investigate in which ways the smaller companies can implement BIM by changing their way to work. The thesis is delimited to work preperations with the objective to define how the work preperations should be structured to enable the implementation of BIM. To achieve the objective of the report, information about the subject has been collected by interviews and literature studies.

Vårterminen 2006.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

In today?s IT world where software is constructed in a rapid pace, testing has become a crucial area to master when testing has to be done at a greater speed. To still be able to handle the demands of high quality software, companies have to spend more resources on testing and introduce test automation. By automating test cases the testers can gain time which they can spend on doing more complex testing and thereby increase the quality of the software.In this thesis we have helped Extenda AB, who delivers systems to retail companies, to introduce test automation in one of their customer specific projects. This has been done using their own in-house ?capture/replay? tool ECP (Extenda Cashier Player).We have also derived a process that explains how Extenda can introduce test automation on other customer projects.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.