The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

One of Sweden?s sixteen national environmental objectives strives to decrease the impact on the climate. By 2020, green house gas emissions should be 40 % less compared to the levels of 1990 and a minimum of 50 % of the energy consumption should come from renewable energy sources. Because of this there is a great need of increasing the production of renewable energy. This is where biogas comes in as a competitive alternative.

Since the turn of the millennium a sharp increase in the interest for bio energy has been observed. Important reasons for this growing interest can be due to the fact that fossil fuels are a finite resource. A net discharge of greenhouse gases occur when fossil fuels are burned. The discharge of greenhouse gases are considered to be the main reason to the greenhouse effect. Means of control to increase the use of bio energy has been introduced and, as intended, the use of bio energy has increased. As a result of the legal provisions the ability to pay for bio energy has increased, which the forest industry view as a problem.

This study analyses the economic consequences due to ethanol production in Eastern Sweden. The analyses consider the cooperative and the farmers as one vertically integrated company. The area that found the market in this study is illustrated in figure 1. The analyses assume that all members act jointly with the objective of maximizing joint profits at the farm level as well as at the cooperative firm. A mathematical model is created to calculate the optimal use of arable land.

Skanska is using work schedules that are specifically designed for employees in the production. These work schedules are called best practice. These are guides containing technical descriptions, design references, capabilities, etc. for work activities. This support function facilitates the work preparation and planning of future work.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

ABSTRACTThis C-essay in political science is written by Ingrid Karlsson, autumn 06. Advisers: Gregg Bucken-Knapp and Susan Marton.? The identity of Tornedalen, a study about identities and its affect on the view of the Swedish state.?The purpose of this essay is to investigate the identification amongst the population in Tornedalen and if their identity affects the view of the Swedish state. I am going to look into how people from that region looks upon their identity. Do they consider themselves as Swedish, Tornedaling or Finnish? I have two research questions on this topic: 1) What does a person from Tornedalen consider their identity? 2) If the way the Swedish state treated Tornedalen, from around the middle of the nineteenth century to the middle of the twentieth century, has affected the way people from this region looks upon their own culture, and if the treatment has affected peoples view of the Swedish state.

The feed is a major cost in the dairy production and there is a constant interest in findingalternative cost-effective feedstuffs. Competitive dairy producers have to seek ways todecrease their production costs and the pursuit of cost-effective feed rations contributesto lower costs of production. An interesting group of protein concentrates are rapeseedproducts like ExPro (heat treated rapeseed) which have during the autumn 2008 andspring 2009 been very favourable compared to other protein feeds.This study focuses on the feedstuff products ExPro and Raps-Drank 60/40 (rapeseeddistillersgrain). The potential use of ExPro in dairy cow feed rations are also explored.ExPro is a well known feedstuff but Raps-Drank 60/40 is a relatively new product andnot known for many farmers.A field study on the use of rapeseed products was made on a limited number of dairyfarms. The main purpose was to study the management of the feedstuffs on the farms.The Farms were selected in cooperation with two local extension services.

The aim of our master thesis is first and foremost to win the competition One Prize - mowing to Growing: Reinventing the American Lawn, announced in USA by the organization Terreform 1, the first of December 2009. Apart from winning the competition we have also tried to reach a deeper understanding of food production today and its future possibilities. Our ambition to present a winning design proposal has to a large extent decided the structure of the entire thesis. Our completed and submitted design proposal - growforgold.org - is a way of addressing urban food production in a creative way, keeping the sovereignty of the individual in mind. Instead of presenting a place-specific design solution our proposal aims to create incentives and possibilities for urban farming to take place anywhere and anytime. Our submission to the competition represents both a tool and a platform which, put in practice, could make landscape architecture happen through the hands of the individual.

Forestry and forest products are vital components of the Swedish economy but the forest is also important for recreation, hunting, out-door life and conserving biodiversity. The Swedish Forest Act has two equally important objectives, production and environmental protection. Polytax is the Swedish Forest Agency´s inventory programme which monitors progress toward the two objectives in connection with regeneration fellings. It includes data on environmental protection measures taken in connection with regeneration fellings. 30 § of the Swedish Forestry Act and related regulations specify the demands for conserva-tion of nature.

Focus of this study was on the underlying values behind consumers buying motives at the point of purchase of meat products in Sweden. Meat consumption in Sweden has increased and in 2012, almost 50% of all meat consumed was imported (SJV, 2013). This is the case despite of the fact that consumers frequently state the importance of Swedish country of origin on the meat products they purchase (www, LRF, 2, 2006). A rising public awareness about health, environmental issues, animal welfare and food safety coupled to meat consumption and meat production is scrutinized both from media and consumers. Due to rising concerns of production-methods of meat, consumers wants to make informed purchasing decisions of the meat they purchase (BEUC, 2013).

Human-animal interaction is suggested to be a main feature within livestock production. The quality of handling, for instance, appears to be greatly depending on the attitudes and behaviour of the stock people. Various studies have been conducted on relationships between human and animals, but few have looked upon differences in human-animal interaction and attitudes between countries. Two countries often discussed in livestock production are The Netherlands and Sweden. It would be of interest to compare these two countries to find out whether (assumed) differences are reflected in the attitudes between animal handlers.

Livestock of pastoralists provide meat, milk, blood, dung and are useful for transportation purposes. In semi-arid and arid areas with very low precipitation the herder must often walk far distances to feed the livestock. This affects the animals? production, especially of milk. Previous studies have investigated how to improve milk production in terms of milking strategies in cattle.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.