In Sweden, selection for leanness in pigs has been going on for almost a century. This sometimes results in gilts and sows being too lean and consequently in a risk for reduced reproduction and health status. The Swedish recommendation includes that gilts should be mated after seven months of age, after one documented oestrus, at 120-140kg live weight and with a backfat thickness of 16-20mm. Five gilt producing herds were visited and records of age, heart girth (for weight estimation), body condition (visual estimation), backfat thickness and exterior were made. The same records were also taken in four gilt buying herds on newly purchased gilts.

To achieve the Government's milestones for 2018, which means that 50 % of food waste shall be separated from household waste and undergo biological treatment (composting or anaerobic digestion).   Hultsfred, Högsby and Vimmerby are three adjacent municipalities of Kalmar, county Småland. During 2012 and 2013 analyzes were performed on their household waste to determine its composition. The household waste is currently collected in one fraction. The work, examines how much food waste the household waste contains. From the amount of food waste, the biogas potential is examined - how much food waste biogas generates and how much energy it corresponds to.   Food waste is broken down by microorganisms under anaerobic conditions (anaerobic digestion) in a biogas plant.

This paper examines the concept of environmental scarcity and the risk of conflict, in particular agriculturalscarcity and the risk of conflict. This paper compares the neighbouring countries Angola and Namibia, andinvestigates why Angola has had a conflict and why Namibia has had peace. This paper investigates if the conflict inAngola is caused by agricultural scarcity and if this is the explanation for the lasting Peace in Namibia..

Extreme Production Makeover? fångade vårt intresse för en tid sedan, strax innan vi skulle börja skriva vår C-uppsats. Metoden går ut på att under mycket kort tid förändra och effektivisera en produktionslina för att höja produktiviteten. Vi blev genast nyfikna på om Extreme Production Makeover? skulle gå att omsätta i administrativa flöden och tjänste-flöden med ett informationslogistiskt perspektiv.Inom produktion finns det en lång tradition av att arbeta med effektiviseringar och förbättringar.

The purpose of this thesis is to discuss how an instrument originally developed for measuring changes toward lean thinking inservice organizations in general should be adjusted in order to be of use in service organizations within the healthcare sector, andin hospital organizations in specific. The adjustments are suggested based on difficulties specifically arising when implementinglean within the healthcare sector.Thesis starting point is a pre-existing lean assessment instrument developed for service organizations in general. The thesis appliesa qualitative method and integrates literature from the health care sector and lean production movement with the expertise of tenacademics and practitioners in order to find difficulties associated with the implementation of lean within the healthcare sector.These difficulties then lie as the substratum for the adjustments suggested to be made on the instrument.The thesis finds that lean, as a philosophy, does not differ between service organizations in general and service organizationswithin healthcare settings. However, due to deficits in the general understanding of lean some adaptions on the instrument mustbe made. First, some words associated with production must be changed to words associated with healthcare.

The large-scale soy cultivation has negative consequences for the habitat of local populations because of the intensive use of pesticides and the destruction of rain forests and eco-systems. GM soya, varieties are often used. The majority of Swedish people, however, do not want GM products in their food. It will be hard in future to ensure GM free food, particularly foods that come from countries where GM crops are grown on a large scale. It is very difficult to avoid cross- contamination when both GM and non-GM crops are grown in the same area.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

La Busta/Konvolutten/The envelope was written in 2006 by the Italian playwright, director and actor Spiro Scimone. It is a contemporary political farce with clear roots and inspiration from Commedia dell´arte. As the main structure for this essay, comparisons have been made between a modern Danish production of Konvolutten by the director Simon K. Boberg and the form and structure of Commedia dell´arte. The importance and use of the political context in both Commedia dell´arte and Konvolutten are explored.The sociopolitical conditions under which Husets Teater (The House´s Theatre) works is analyzed.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Detta arbete kommer att visa hur det är att jobba som animatör på Framestores reklamavdelning i London. Jag går igenom den del av pipelinen som är relevant för mig som animatör och jag kommer även att redovisa arbetsmetoder för att snabbast leverera korrekta animationer..

Tidningskompaniet, a publishing agency in Göteborg, has during the spring of 2003 developed a customermagazine for Göteborgsvarvet, a Half Marathon Race in Göteborg. If realized the magazine shallbe distributed to former participants of the race twice a year and will be financed by adverts.As part of the editorial concept, development of a graphic profile will be made for the magazine. Thisdegree project will result in the production of a »dummy« magazine to be presented to the client and tobe used by the advertisement sales people in their work.The magazine, named »Varvet«, will convey the message that anyone can run Göteborgsvarvet. Theintention is to give the magazine a »youthful and sporty« image.The work in this degree project has comprised designing the magazine in co-operation with an editorialconcept developer and a project leader at Tidningskompaniet, and also the production of 18 magazinepages including prepress work. The magazine has been made into a strictly sectionized product,with a mix of short and long articles with lighter material and strict how-to-do-it guides.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

The unheated greenhouse was originally a development from orangeries in the 1700th century and in 1930 and 1940 in blocks of greenhouses in the province of Scania. Today unheated greenhouses are used in permaculture, in the?eco villages? and in commercial culturing. Of the total Swedish commercial greenhouse area is today 8 % used as unheated greenhouses (SJV). This essay is based on the acceptance that unheated greenhouses will have a renaissance as production units. In the light of the today?s debate about energy ? and environment and the condition concerning this, the unheated greenhouse becomes an alternative. The purpose of this essay is to make an arguing synopsis about unheated greenhouses for using in acting as teacher, consultant and inspirer and also for taking part of the acceptance as ?for? or ?against?. The information is based on literature studies and information gathered with the keywords unheated greenhouse, coolhouse, coldhouse, greenhouse, type of greenhouse, orangery, greenhouse cultur, swedish greenhouse culture and permaculture, data gathering through SCB/SJV and by interviews with persons in the garden branch. My conclusion is that the unheated greenhouse could have a renaissance as a production unit. In this context it is important to give cultivators of greenhouses with experiences of unheated greenhouses great possibilities to share their knowledge, and through education possibility to change attitudes concerning unheated greenhouses. .

Syftet för det här examensarbetet var att praktiskt reducera ställtiden på enbefintlig produktionslinje på Ruukki i Halmstad. Vid tiden då författarna togkontakt med företaget var den nuvarande ställtiden alldeles för lång och långtifrån optimal. I samband med projektets start gjordes det ett antal avgränsningaranpassat till den tiden som fanns tillgänglig.Tillvägagångssättet och metodiken till lösningen bakom ställtidsproblematikenföljer Shigeo Shingos Single Minute Exchange of Die (SMED), där har författarnautfört analyser i form av iakttagelser och tidtagning. Upptäckterna som gjordesunder analys samt implementering var att även om SMED är en direkt metodik förställtidsreduktion finns det andra faktorer som kan motverka implementeringensamt dess goda resultat. Dessa faktorer som påvisades under projektets gång varbland annat de mänskliga aspekterna och den bakomliggande företagskulturen iorganisationen.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.