The purpose of this essay is to analyze and clarify what?s behind the success of artistsin the music sector and what characterizes sustainable success for these. We arecurious about what lies behind the success of an artist and what makes an artist have asustainable career. The essay is based on a qualitative approach where six interviewshave been performed with people in various positions in the Swedish music industry. The interviewees have been selected after their knowledge and experience within thefield.

Uppsatsens syfte är att undersöka två företag med olika ägarförhållande och vinstintresse, för att se om de skiljer sig åt avseende vad de prioriterar att kommunicera av sitt CSR-arbete till sina intressenter, samt vilka CSR-kategorier företagen väljer att arbeta med. Vår avsikt är att undersöka om och hur ägarförhållande och vinstintresse kan bidra till att forma företagens CSR-strategier. Området är intressant att undersöka då ägarförhållande och vinstintresse som bidragande faktorer till att forma CSR-arbete och kommunikationen av detta är relativt outforskat..

To build a sustainable future should we first understand that; every aspect of our daily lives can affect the environment. It?s important that we take responsibility for understanding how we impact the environment and change our actions accordingly. The worlds total energy consumption equivalent to 80 million MWh / year. This corresponds to about 220 million MWh / day.Energy consumption is one of the main reasons for increased greenhouse gases when the reduction of this consumption has a great demand worldwide.In order to prevent the energy that consumed the buildings must be energy efficient but there is a conflict between radon ventilation and energy conservation in a building, given that ventilation can consume as much energy (currently 29-59% of energy-efficient houses use), especially in a cold climate as in Norway.

A couple of hundred years ago half of the earth?s surface was covered by forest. Today, only half remains and every year an area the size of Nepal is disappearing. Deforestation, together with the burning of fossil fuels, is also one of the reasons for the increasing greenhouse effect. Another relatively unknown problem for the world?s forests is the trade with illegally harvested timber.

?A culture center should be visually welcoming as well as attract a diverse range of visitors with different backgrounds.? This was the client?s request for a new cultural center in Nairobi. The location is in the heart of Nairobi?s industrial area, near several existing buildings that are already in use by the culture organization known as Go Down. I have chosen to keep most of the existing buildings and to use my new building as a complement for the desired program.

This paper describes a factor analysis applied at the data of the European Union structural indicators. These are the official indicators for wealth and economic development in the European Union with main use to evaluate the outcomes of the year 2000 Lisbon goals for making the European Union the world?s strongest economy by 2010. The purpose of the data is to serve for comparing and ?learning by doing?-policies, but have, due to size and format, so far been hard to use for a good compare between member countries.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

SAMMANDRAGLerums kommun har en vision om att bli Sveriges ledande miljökommun till år 2025 eller tidigare. En stor del av arbetet, som kännetecknas av hållbarhet, kreativitet och inflytande, sker i Gråbo. Det är idag en ort som känns bortglömd och är lätt att passera utan vetskap om dess placering. Samhället har såväl synliga baksidor som är i behov av förbättring och förnyelse, som outnyttjade tillgångar som bör lyftas fram.Syftet med föreliggande arbete är att ta fram förslag på hur Gråbo kan förbättras både med avseende på hållbar samhällsutveckling samt estetiska och funktionsmässiga förbättringar av samhället.Arbetet påbörjades med en faktainsamling, som sedan låg till grund för en inventering på plats i Gråbo. Detta sammanställdes till en analys där tillgångar och problem presenterades med hjälp av Adobe Illustrator till flera kartor.

In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.