
Sökresultat:
7876 Uppsatser om Sustainable Product Development - Sida 24 av 526
Planering för hållbar landsbygd
This is my final thesis in landscapeplaning at the Swedish University ofAgricultural Sciences (SLU). I discuss howthe countryside should be planned, witha sustainable perspective. In the study Iexamine four important conditions forplanning.The countryside is often defined bywhat it is not which makes it difficult todescribe in general terms. The definition ofthe term countryside in this study is takenfrom the National Rural DevelopmentAgency (Glesbygdsverket). The conclusionis: Planners and scientists should have anunderstanding for the complexity of thecountryside; otherwise there is a risk oflosing the characteristics of the country.The legislation, goals and conventionswhich have an impact on the Swedishcountryside are both national and international.To find out how the settlementdevelopment is dealt with, I havestudied the Swedish building legislations(among others, plan- och bygglagen andmiljöbalken).Similar to the difficulties on finding asuitable definition for the term countryside,it is complex to define the term sustainabledevelopment.
Framtagning av ett förlängningsbart bord
This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.
Den ekologiskt hållbara staden : en diskursanalytisk studie av styrningspraktiker i Hammarby Sjöstad
This study focuses on the politics around ecological sustainable development in Sweden today, with emphasis on urban development, building and living. The starting-point for this study is the environmental adapted city district of Stockholm, Hammarby Sjöstad. The primary focus of the study is to investigate what means of control the environmental investment in Hammarby Sjöstad is expressing, and to elucidate their ideological, political and social implications. The empirical material is primarily based up on the local Hammarby Sjöstad environmental program along with qualitative in-depth interviews with citizens of this district. The study is based on critical discourse analysis The result of this study is that the ecological investment in Hammarby Sjöstad partly constitutes a hidden exercise of power, taking shape as built-in physical measures in the dwellings and the neighbouring surroundings.
Fuzzy Front End: en litteratur review
Denna uppsats behandlar första fasen i produktutvecklingsprocessen, det vill säga Fuzzy Front End (FFE). FFE är perioden från att det finns en möjlig idé och företaget anser att den är värd att utforska ytterligare, till dess att idén är godkänd och företaget är redo för att börja utveckla samt investera i projektet. I litteraturen anses denna fas som kritisk därför att den är problematisk samt avgörande för företagets fortsatta aktiviteter inom FFE. Forskningen har visat att det finns ett samband, att om företaget effektiviserar FFE bidrar det till framgång för den nya produkten. Det finns liten förståelse vad som verkligen försiggår i FFE fasen och i denna Litteratur Review har 12 stycken teman identifieras för att redogöra för FFE.
El-rollator
Our examination project has been to develop today?s existing walking frames and make them more exiting and user friendly for tomorrow?s users.The use of a walking frame today makes it easier for a person with a movement difficulty in different extent. It makes it easier with their living condition and the user get a more movement easier life where they can take care of the daily chores without any help from the society or the family members.With our product we get a product that not only makes it easier for the user to get out and get forward. We help the user to get forward where they often would have difficulties to get forward. An example is where its more steeper parts where it could be more difficult to get up or down and even with more difficult foundation due to bad weather.
Framtagning av en remdriven växellåda till en häcksax
The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.
Redesign av gallervält för Svea Redskap AB : Examensarbete, produktutveckling
The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.
Underlag till klimatledningssystem för skolor
The climate issue is a significant question, and the problem is mainly caused by human activities. Everyone can help to counteract the enhanced Greenhouse effect by reducing the amounts of energy they use and by not consuming more products then they need.Schools are some of societies many consumers and therefore contribute to the Greenhouse effect. The School also has an important task; to teach and disseminate knowledge and information about the climate and the environment. According to the Swedish National Agency for Education, Skolverket, must all schools regularly consider the environment and sustainable development throughout the entire education process. Unfortunately, this is not the case for many schools in Sweden today.One of many tools that can be used to coordinate environmental work and initiatives, and also to make it more efficient, is environmental management systems.
Kunskapsutveckling och lärande vid utveckling av en ny mjukvara. En fallstudie på ESBE AB.
This study is based on the development of a new software, which is used as a recommendationtool for selecting the best product. As part of the software development has an external partnerbeen asked to assist. The report will process the expectations that different people have on anew project but also how information is communicated to an external partner.The results from this study show that a software's function is closely linked to its usability.Therefore shall usability been taken into account when a new resource is created. The study alsoshows the importance of being able to share information, on how the program will beconstituted, to someone outside the organization..
Standardiserat arbetssätt för kunskapsprocesser : ? En fallstudie på en prototypverkstad
In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.
Fr?n rapportering till transformering: H?llbarhetskonsulters perspektiv p? CSRD:s potential till h?llbar verksamhetsomst?llning
Humanity faces a major challenge with the climate and environmental crisis, largely driven by
reckless recourse use and greenhouse gas emissions by corporations. The EU?s Corporate
Sustainability Reporting Directive (CSRD) aims to standardise corporate sustainability
reporting, making practices more transparent and comparable. This directive seeks to enhance
sustainability practices and guide market forces towards sustainability, supporting the EU?s
goal of net-zero emissions by 2050.
Kuna Yala ? Effekter av lokal involvering inom destinationsutvecklingen : B-uppsats
This essay has examined how the local community is involved with the tourism development on the San Blas islands and how it effects the destinations development. The method of choice has been a qualitative interview with an operator that offers trips to the destination. Also there has been made a literature study where previous research about the San Blas and the subjects of choice is being presented. During the writing process of this essay it has become obvious to us that the local community (Kuna Yala) is very much involved in everything that concerns the destination. We can thereby establish that the local community of San Blas can be placed on the top step of Arnsteins (1969) ?Ladder of Participation?.
Shooting Target - Konstruktion : Product Development
The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.
Risk Management vid implementering av regulatoriska ändringar inom Sweden Operations
The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.
Hållbart ansvarstagande för ett medelstort byggföretag i Sverige - En analys av värdeskapande aktiviteter som bidrar till hållbar utveckling.
This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be implemented into an organization.