To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

This essay is the result of a case study. The aim of this study has been to gain an understanding of government employee?s opportunity to be involved in and contribute to the processes tied to organizational development. The case study is based on the perspective of the government employees and their experience and thoughts regarding their opportunity to be a part of the organizational development. The empirical data that was generated by the case study has been analysed with New Public Management and Sense Of Coherence as a theoretical point of view.

The aim of this paper is to examine the capacity for ethical reasoning of Swedish certi-fied auditors in the five largest accounting firms in Stockholm, and also how ethics courses affect the auditors' ability to ethically statement. To calculate the auditors ability to ethical statement, questionnaire has been used. The questionnaire is based on a psychological instrument, the so-called Defining Issues Test. At the beginning of the questionnaire some questions are asked about the ethics courses. From the questionnaire a calculation was made of an average index called p-score (Principled score).

The value of a company's employees is considered to be higher and more important for a business success than ever. Losing employees is not only a loss of valuable knowledge, it also implies a significant cost related to the recruitment of new employees. To attract potential personnel, it is important for the companies to understand how to communicate with talents. Choosing a communication medium for a job advertisement is not easy when new options constantly arise. Despite the development of new communication mediums and channels, such as social mediums, the traditional communication medias still remain available.

The aim of this paper is to examine the capacity for ethical reasoning of Swedish certi-fied auditors in the five largest accounting firms in Stockholm, and also how ethics courses affect the auditors' ability to ethically statement. To calculate the auditors ability to ethical statement, questionnaire has been used. The questionnaire is based on a psychological instrument, the so-called Defining Issues Test. At the beginning of the questionnaire some questions are asked about the ethics courses. From the questionnaire a calculation was made of an average index called p-score (Principled score).

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

Holmen Paper is one of Sweden?s leading manufacturer of paper, with two Swedish production facilities located in Norrköping and Hallstavik. The European continent constitutes the company?s largest customer base which makes the company?s distribution system an integral part of the business. Historically, much of the produced paper has been transported by vessels, as vessels allow large volumes of goods and deliveries to markets which are difficult to reach with other modes of transportation.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

Stockholm is growing with almost two fully loaded SL-buses a day. One of the consequences that derive from this is the increase of public transport travelers who put the regionally governed public transport up to the test in terms of its capacity. The Transport administration in Stockholm County initiated 2015 a project with the purpose of simplifying the calculation of bus stop capacities. A hypothesis (set up by the Transport administration) based on that a model for calculation of bus stop capacities could be calibrated for Stockholm conditions is being researched in this bachelor?s essay.The study is implemented by self-collected traffic data from bus stops located in the Stockholm city center.

This thesis, drawing from several empirical investigations, reaches the conclusion that there seems to be a positive correlation between the level of democracy and the level of state capacity in Latin American countries. This correlation is explained by a hypothesis derived from Rational Choice theory. With some important caveats, this conclusion is then applied to the discussion about democracy as a form of government. Within democracy, the thesis also offers an insight into different electoral systems and its possible implications, mostly on a theoretical level. The thesis only exists in swedish as of yet..

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

By conducting interviews, studies as well as scanning the current scientific landscape, this paper examines the opportunities of increasing current capacity within the public transportation system in Stockholm with simple financial means for the benefit of the travelers. The paper focuses on the central station of the subway system and how adjustments of processes carried out in relation to the turnstiles could increase performance within areas of interest, given the preferences of the travelers. The theoretical framework of the paper includes models from the field of capacity management as well as theories related to the pedestrian behavior. Applying these theories and models to the collected data, the paper derives some main conclusions. First of, people using the public transportations system, and especially the subway, consider speed and dependability as the most important performance objectives for the caretakers of the public transportation system, SL and MTR to master.