This report is presenting an approach that can be used to measure water Surfaces in difficult conditions caused by dense vegetation and lack of nearby known points. The objective was to make a contribution to necessary measures for adaptation against floods in Grums Municipality along the stream Karlbergsån, which may occur when persistent rain raises the level of the stream. Along the river there are low-lying areas prone to flooding. According to Grums Municipality, the stream may widen where the water level differences are large, to create a better flow path and to counteract flooding. Grums Municipality was also interested in survey stormwater discharges which may affect the water level in the stream.

Native spider silk is an attractive lightweight natural polymeric material with a unique combination of strength, extendibility and flexibility. Synthetic, recombinant spider silk is an attractive biomaterial with several possible fields of application. When a foreign material is introduced to blood, this can for example cause unwanted coagulation and complement activation. The aim of this study was to investigate if coatings of heparin or albumin could improve the blood compatibility of films of recombinant spider silk and to develop an initial method to do so. Hypothetically, objects like pacemakers, stents and dental implants could be covered with spider silk films of high blood compatibility to reduce potentially harmful foreign body reactions caused by the immune defense. Increased blood compatibility would likely lead to improvements for both the individual patients and the society thanks to reduced load on healthcare institutions. Our objective was to assess the blood compatibility of both functionalized and non-functionalized recombinant spider silk by evaluating coagulation and activation of the complement system of the immune defense. Coagulation was evaluated visually on glass slides and complement activation was analyzed by measuring the concentration of the complement system mediator C3a in blood samples that had been exposed to the different materials. This study introduces a non-toxic and easy performed method of improving the blood compatibility of recombinant spider silk films by adding a heparin coating. Heparin coated Surfaces had statistically significantly higher blood compatibility than uncoated Surfaces. The effects of albumin coating of films were less clear compared to the results of heparin coated films. Complement activation could not be evaluated because of high activation in all samples prior contact with the materials that were included in the study..

Verket Pose kretsar kring frågeställningen vad det är att vara kropp i en rumslig situation. Verket består av sju textila föremål som på olika sätt förhåller sig till kroppen och söker etablera en relation till betraktaren, bäraren och det omgivande rummet..

Aim and research questionsThe aim of the study was to examine pupils? physical activity on schoolyards in northern Stockholm?s surrounding municipalities, based on the schoolyards? design regarding supply of spaces, material, equipment and gender. The research questions were:1. Was there any association between how well spaces, materials and equipment were represented in the schoolyards and pupils? physical activity during recess? If so, how did the association come to expression?2.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal Surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the Surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

School ground development is becoming increasingly popular in Sweden today and local community settings are also seen as an important resource for education. The debate today raises the question about the whole city?s pedagogic potential. Outdoor education is a pedagogy that comprises outdoor learning with focus on the sensual experiences. Connection to the classroom education is an important part of the pedagogy and so is the place for the tuition.But how should the place for the tuition, i.e.

In my project I have collaborated with Linda Larson, who is the creator behind the fashion brand Elveel. The goal was to produce an identity and a graphic profile for Elveel. The aim was that the graphic profile would act as an extension of the clothes aesthetics. I wanted to explore if I by different folding and cutting techniques, in tags and packaging, could reflect the details of the clothes expression. But also how different design elements can reflect the story behind the clothes.

This report deals with hard Surfaces and the factors which are behind the criteria for dimensioning, also dependent on the level, or volume, of traffic. A test was made on slabs of two kinds of natural stone. This was made to see if the values that were reached for breakload was transferable to the same tables that the concrete industry is using for surface dimensions of slabs and paving stones. The test showed very high values and the result, together with the written study, led to the author?s suggestion for a classification table where slabs of natural stone were divided in to different classes depending on traffic, thickness and durability..

I work with and through glass and it´s from this field and tradition my work springs from. I am interested in how we look at and judge different expressions. I have been taught what visual expressions and shapes that are being appreciated and accepted and how to create objects like that. It should be clean, smooth, simplistic, and utterly pleasing. I recognize these attributes from what is being thought of as beautiful and desirable concerning the body.

The purpose of this work was to provide a better understanding of urea?s decomposition and byproduct formation in an SCR system on heavy trucks. In my experimental setup with TGA-DSC-FTIR (a combination of two thermal analysis methods and a method for gas phase detection), an FTIR method for urea in the gas phase was developed for the qualitative and quantitative determination of urea and its decomposition products. Chemicals such as urea, biuret, cyanuric acid and melamine of p.a. quality were used in this method development. Beforehand, there was no FTIR method available to detect these substances; hence, the aim of this work was to develop an FTIR method to understand the degradation chain of urea. The combination of TGA and DSC was used for analysis of different samples, where urea, biuret, cyanuric acid and melamine in varying amounts have been weighted in for various experiments in order to study the temperature at which a phase transition or reaction occurs, i.e.

In my thesis I have sand blasted different type of woods - ring-porous and diffuseporous deciduous tree species and conifers - to show different results depending on the species, the direction of the grain and the effects of surface treatment of a blasted surface.The results of my tests were sometimes unexpected, such as that the sand from blasting almost completely disappeared, that all wood Surfaces after blasting exhibited a much lighter or paler surface than before and that the diffuse-porous tree species showed differences in hardness between the beginning and end of annual rings.By creating a library of different kinds of wood and sandblasted surface treatment, I have created a reference bank that I will be able to use me in the manufacturing of interiors, furniture and other objects..

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural Surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

In this report presents a thesis by Frida Altskog performed in collaboration with Askersunds Kakelmakeri. The project?s goal has been to produce a ceramic ledge after the company?s specifications. The company?s desire and production facilities have been in focus.

Då marina enheter numera deltar i internationella missioner, kommer den nya miljön som enheterna opererar i att påverka bland annat deras sensorer.Den här studien avhandlar några av de nu framtagna självsanerande ytbeläggningarna och ger en presentation av hur de fungerar på några marina elektrooptiska sensorers yttersta linser.Studien försöker ge svar på ytbeläggningarnas transmittans och hur effektivt de kan sanera bort oönskade saltlager tillsammans med andra nedsmutsande partiklar från sensorlinserna samt den militära nyttan av att använda självsanerande ytbeläggning..

Background: Since1994, the EU NickelDirective is limiting the release of nickel from objects that are in prolongedcontact with skin. Despite this, nickel is still the most common cause of contactallergy in industrialized countries. This could implicate that other productswith short contact to the skin, which are not restricted by EU´s legislation inREACH (Registration, Evaluation, Authorisation and Restriction of Chemicalsubstances), could be a source of nickel or cobalt exposure. There is no limitfor cobalt release within REACH. To determine if there is cobalt or nickelpresent on the surface of a material and if metal can be released in contactwith the skin, there are quantitative and qualitative methods, such as the DMG(dimethylglyoxime)-test, the cobalt spot-test and a method for releasedetermination according to EN1811.Objectives: Laptops are not included in the REACH legislation.