My project aims to understand more about the methods used in making woven textiles on an industrial level, and how these tech¬niques can be adapted to create object-specific pieces. On visiting the furniture fair in Stockholm, I was surprised to see that most of the textiles used for furniture were so similar, despite the variation in the furniture itself. My project is about creating textile patterns that are specific for each piece.The idea behind the process could be used for any product, but the pattern I created is specifically for the armchair Accent by Yngve Ekström. I wanted to create the feeling of a pattern moving over the Surface of the object and adjusting to it. I worked primarily with differences in density.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2014:03.

This thesis describes a system for dealing with free Surface fluid simulations, and the components needed in order to construct such a system. It builds upon recent research, but in a computer graphics context the amount of available literature is limited and difficult to implement. Because of this, the text aims at providing a solid foundation of the mathematics needed, at explaining in greater detail the steps needed to solve the problem, and lastly at improving some aspects of the animation process as it has been described in earlier works. The aim of the system itself is to provide visually plausible renditions of animated fluids in three dimensions in a manner that allows it to be usable in a visual effects production context. The novel features described include a generalized interaction layer providing greater control to artists, a new way of dealing with moving objects that interact with the fluid and a method for adding source and drain capabilities..

Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

The concentration of acute phase proteins in serum is altered as a response to inflammation, infection or trauma. this makes these proteins potential biomarkers of unspecific pathological processes. In cattle, haptoglobin and serum amyloid A are the two acute phase proteins that show the largest increase in serum concentration as a result of inflammatory processes. The haptoglobin concentration has been shown to correlate to clinical signs as well as inflammatory processes found at post mortem examination. This feature could be useful prognosis of the individual as well as for monitoring the health status of a herd or identifying carcasses that shold be examined closer at the slaughter-house.

In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

Digitala spel har länge använt sig av terräng, det vanligaste sättet att lagra dessa terränger är med så kallade höjdkartor. Höjdkartor har en stor begränsning, de inte kan innehålla tunnlar.Denna rapport undersöker två alternativ till höjdkartor som arbetar med voxlar. Dessa två algoritmer är Marching Cubes (Lorensen & Cline, 1987) och Constrained Elastic Surface Nets (Gibson, 1998). Syftet med undersökningen är att evaluera dessa algoritmer med avseende på tidseffektivitet, minneseffektivitet och visuell korrekthet för att ta reda på vilken algoritm som öveträffar den andra med avseende på vilken aspekt.De utförda experimenten visade att Marching Cubes (Lorensen & Cline, 1987) var den mest tidseffektiva av de två, Constrained Elastic Surface Nets (Gibson, 1998) var mest minneseffektiv och Marching Cubes (Lorensen & Cline, 1987) var mest visuellt korrekt. Vidare forskning i ämnet skulle kunna göras på terränger som är för stora för enskilda modeller..

As the volumes are entering the world of computer graphics the pure volume visualisation becomes a more important tool in for example research and medical applications. But the advance in haptics --- force feedback from the computer --- is behind. In volume haptics no equal to the proxy method so popular in Surface haptics has yet emerged. Some implementations of volume haptics even use Surfaces as intermediate representations so that Surface haptics can be used.The intention of this work was to create natural feeling haptic feedback from volumetric density data using pure volume haptics. The haptic algorithm would be implemented in Reachin API for the Reachin Desktop Display, together with other parts to build up a usable volume visualisation environment.To achieve the feeling of stiffness and friction dependent on tissue type, a proxy based method was developed.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and validation of stationary groundwater models is discussed. The time dependency between Surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the Surface water levels. Hence the use of such long-term means for calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

This paper examines Hannah Ho?chs photomontage Schnitt mit dem Ku?chenmesser Dada durch die letzte weimaren bierbauchkulturepoche Deutschlands. The paper has as its aims to understand and analyze the predominated allegorical interpretation of Schnitt and to develop a logic how meaning is produced when a viewer look at Schnitts Surface. The paper finds that the predominated interpretation has been arbitrarily created out of a specific spectator that acts in a specific context and conclude instead that the predominated interpretation should be understood as a potential interpretation by a potential viewer. The paper continues to create an understanding of Schnitt as a flatbed picture to establish that as a postulate and to use it in the later semiotic dissection of Schnitts Surface.

This degree project studied Surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the Surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its Surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

The purpose of this project is to analyze and study the absorption of the substances ivermectin, spinosad and barettin to hydrophobic and hydrophilic Surfaces, and to analyze and study if the barnacle larva are effected when they try to settle on the treated Surface.Incubation tests with barnacle larva in Petri dishes were performed as well as absorption tests on hydrophobic and hydrophilic Surfaces which were tested with ellipsometry. To determine the Surface thickness.The barnacles were placed in hydrophobic as well as hydrophilic Petri dishes that had been incubated with ivermectin, spinosad or barettin. After four to six days the larva was counted to analyze the settling. From the results conclusions could be drawn about the adsorption abilities of the substances to the different Surfaces.The barnacles were placed in hydrophobic as well as hydrophilic Petri dishes that had been incubated with ivermectin, spinosad or barettin. After four to six days the larva was counted to analyze the settling.

Erasteel Kloster AB Söderfors have been commissioned by the county administrative board in Uppsala län to make an inventory of possible contaminations in theirs industrial- and landfill areas on the basis of the Swedish Environmental Protection Agency?s; ?Method of Surveying Contaminated Sites-phase 1? (MIFO-fas 1). The inventory starts with maps and archive studies, place visits and interviews, and finally a risk classification is done. A risk classification is a compilation of four categories; pollutant toxicity, contamination level, possible spreading condition of the pollutant, sensitivity and protection value of the environment. In this paper five partial areas (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin, Östra verken and Myrområdet) have been described from a historical point of view. Only parts of four areas have been risk classified (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin and Östra verken), due to that the other areas isn?t own by Erasteel Kloster AB. Holmen- and Jörsöområdet Holmen- and Jörsöområdet have during the entire activity time been carried out as the production core in the company.

Slopes in fine till soils are exposed to Surface erosion due to rainfall, snowmelt and upland water sources. Large areas of road slopes are therefore covered for Surface erosion protection. Preventive methods like ditches and trenches are also being used. Silt tills are particularly troublesome since the water can bring the soil into suspension and cause mudslides. Different methods for erosion protection have been studied in this work, with the emphasis placed on rockfill covering. The need for and the dimensioning of this type of covering has been examined in literature and field studies.

Phosphate is a used as a Surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the Surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the Surface has to be completely free from lubricants and coatings till the next step of process.