As the volumes are entering the world of computer graphics the pure volume visualisation becomes a more important tool in for example research and medical applications. But the advance in haptics --- force feedback from the computer --- is behind. In volume haptics no equal to the proxy method so popular in surface haptics has yet emerged. Some implementations of volume haptics even use surfaces as intermediate representations so that surface haptics can be used.The intention of this work was to create natural feeling haptic feedback from volumetric density data using pure volume haptics. The haptic algorithm would be implemented in Reachin API for the Reachin Desktop Display, together with other parts to build up a usable volume visualisation environment.To achieve the feeling of stiffness and friction dependent on tissue type, a proxy based method was developed.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

This paper examines Hannah Ho?chs photomontage Schnitt mit dem Ku?chenmesser Dada durch die letzte weimaren bierbauchkulturepoche Deutschlands. The paper has as its aims to understand and analyze the predominated allegorical interpretation of Schnitt and to develop a logic how meaning is produced when a viewer look at Schnitts surface. The paper finds that the predominated interpretation has been arbitrarily created out of a specific spectator that acts in a specific context and conclude instead that the predominated interpretation should be understood as a potential interpretation by a potential viewer. The paper continues to create an understanding of Schnitt as a flatbed picture to establish that as a postulate and to use it in the later semiotic dissection of Schnitts surface.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

The purpose of this project is to analyze and study the absorption of the substances ivermectin, spinosad and barettin to hydrophobic and hydrophilic surfaces, and to analyze and study if the barnacle larva are effected when they try to settle on the treated surface.Incubation tests with barnacle larva in Petri dishes were performed as well as absorption tests on hydrophobic and hydrophilic surfaces which were tested with ellipsometry. To determine the surface thickness.The barnacles were placed in hydrophobic as well as hydrophilic Petri dishes that had been incubated with ivermectin, spinosad or barettin. After four to six days the larva was counted to analyze the settling. From the results conclusions could be drawn about the adsorption abilities of the substances to the different surfaces.The barnacles were placed in hydrophobic as well as hydrophilic Petri dishes that had been incubated with ivermectin, spinosad or barettin. After four to six days the larva was counted to analyze the settling.

The purpose of this essay was to try to understand the relationship between the horse and man during the last part of the Iron Age and trough out the Medieval Age. To be able to get a result I investigated the horse's tending, work within agriculture, riding, warfare, breeding, to stable horses, oxen, sports and hunting, eating of the horse and age at slaughter and more. The results showed that the horse's position changed from the later part of the Iron Age throughout the Medieval Ages and in different ways for, respectively, the elite as for the peasant culture..

Erasteel Kloster AB Söderfors have been commissioned by the county administrative board in Uppsala län to make an inventory of possible contaminations in theirs industrial- and landfill areas on the basis of the Swedish Environmental Protection Agency?s; ?Method of Surveying Contaminated Sites-phase 1? (MIFO-fas 1). The inventory starts with maps and archive studies, place visits and interviews, and finally a risk classification is done. A risk classification is a compilation of four categories; pollutant toxicity, contamination level, possible spreading condition of the pollutant, sensitivity and protection value of the environment. In this paper five partial areas (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin, Östra verken and Myrområdet) have been described from a historical point of view. Only parts of four areas have been risk classified (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin and Östra verken), due to that the other areas isn?t own by Erasteel Kloster AB. Holmen- and Jörsöområdet Holmen- and Jörsöområdet have during the entire activity time been carried out as the production core in the company.

Slopes in fine till soils are exposed to surface erosion due to rainfall, snowmelt and upland water sources. Large areas of road slopes are therefore covered for surface erosion protection. Preventive methods like ditches and trenches are also being used. Silt tills are particularly troublesome since the water can bring the soil into suspension and cause mudslides. Different methods for erosion protection have been studied in this work, with the emphasis placed on rockfill covering. The need for and the dimensioning of this type of covering has been examined in literature and field studies.

There is an old saying, that after Epaminondas nothing was ever the same again. In this thesis I will focus on three questions: "Epaminondas the man." Who was he? "Epaminondas the general." How did he change the technique of warfare that made it possible to beat the Spartans? "Epaminondas, founder of cities and wall-builder." How did he build the walls around the cities he initiated, that made them resist enemy attacks for many years to come?While seeking the answers to yhese questions I will make a contextual analysis to get the historical background to all the phenomina involved..

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Östby waterworks in the community of Kramfors has since 2003 had problems of fast clogging of the slow sand filters. As the clogging appears more often, they must be cleaned more frequently which has made the drinking water preparation difficult. Wintertime it has sometimes been impossible to clean the filters which has led to their closing and this has influenced the water quality negatively.The waterworks is a surface waterworks which takes its raw water from the lake Sjöbysjön. The water is flocculated and filtered in a contact filter with the flocculent EKOFLOCK 91. Thereafter it is alkalinized before it reaches the outdoors placed slow sand filters.

The number of people of getting allergic symptoms is increasing and the reasons are considered to be many. The human have changed their habits and spend more time indoor. In combination with new building technologies where denser housing constructions and new materials this causes bad indoor climate contributes to a higher occurrence of allergiesThere are several courses of action to deal with this problem. One action is by choosing allergy-free interior surface materials. An allergy-free material emits low concentrations of harmful substances resulting in a great indoor air quality.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The aim of this study was through theories of emotional labor; understand how staff and volunteers within women?s shelter handled their emotions in the encounters with battered women. To examine this we used a qualitative method and interviewed four staff members and three volunteers spread across four different women?s shelters. The data collected was analyzed using Hochschilds? theory of emotional labor.