This essay is about the tactical basic principles as they are mentioned in the Swedish Doctrine for land based operations (2005) and the German side during the battle of Verdun 1916. The purpose of this essay is to clarify whether the used doctrine is appropriate to use on future attrition battles.        This is done by a case study of the German side during the battle ofVerdun. In this case study indicators of the basic principles are then identified and analysed with the starting point at the two questions that the essay is based around. The essay starts with an introduction where above is attended, in the second part the basic principles, the background to the battle and the battle itself is described. Finally the tactical basic principles are analysed and discussed based on the questions that the essay is based on.In the analysis and the discussion the conclusion is drawn that the tactical basic principles were present on the German side during the battle of Verdun and that they are of a general character and may be applied on both attrition warfare of 1916 and modern battles of attrition..

In the future network-based Swedish Defence (NBD), attaining information superiority will be of great importance. This will be achieved by a network of networks where decision-makers, information- and weapon-systems are linked together. As a part of the development of NBD, we have performed a study of user interface design for a future network-based tool package for analysis of sensor systems, referred to as the C2SR-system. This thesis was performed at Ericsson Microwave Systems AB, Sensor and Information Networks, during the autumn 2002. A pre-study concerning the requirements of usability, trustworthiness and functionality of a user interface for the C2SR-system was performed.

During the past few years a vast amount of research has been done to increase the understanding of the complex ecosystem of the Baltic Sea. Modelling and simulations are important tools to increase knowledge of the system. A suitable model must be simple to use and the parameters and variables needed in the model must be easy to access.In this paper a dynamical mass-balance model, CoastMab, which is validated for smaller coastal areas, has been used to predict concentrations and transports of phosphorus in three large coastal areas - the Gulf of Finland, the Gulf of Gdansk and the Gulf of Riga. CoastMab uses ordinary differential equations to regulate inflow, outflow and internal flows. To reflect seasonal variations in temperature and different types of flows the model has a temporal resolution of a month.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

Denna uppsats har skrivits som en del av de studier i krigsvetenskap jag erhållit under min tid vid yrkesofficersprogrammet.Syftet med uppsatsen är att beskriva sambandet mellan de grundläggande förmågorna ledning och rörlighet samt begreppet högt stridstempo vid förband av lättare karaktär.Den metod som använts i uppsatsen är en fallstudie som bygger på en kvalitativ textanalys. Genom en granskning av två valda operationer genomförs en analys efter varje skede. Den teknik som använts för insamling är litteratursökning. En frågeställning har behandlats: Hur såg sambandet ut mellan högt stridstempo och de grundläggande förmågorna ledning och rörlighet vid Operation Market Garden samt Operation Merkurius?Utifrån mina gjorda fallstudier visar resultatet på att i manöverkrigföring är begreppet högt stridstempo av stor vikt för att lyckas med striden.

The purpose of this work was to provide a better understanding of urea?s decomposition and byproduct formation in an SCR system on heavy trucks. In my experimental setup with TGA-DSC-FTIR (a combination of two thermal analysis methods and a method for gas phase detection), an FTIR method for urea in the gas phase was developed for the qualitative and quantitative determination of urea and its decomposition products. Chemicals such as urea, biuret, cyanuric acid and melamine of p.a. quality were used in this method development. Beforehand, there was no FTIR method available to detect these substances; hence, the aim of this work was to develop an FTIR method to understand the degradation chain of urea. The combination of TGA and DSC was used for analysis of different samples, where urea, biuret, cyanuric acid and melamine in varying amounts have been weighted in for various experiments in order to study the temperature at which a phase transition or reaction occurs, i.e.

Ensåsengruvan is a mine situated within Ljusdals municipality in central Sweden. Themine was in use from 1984 to 1991 and has since been undergoing a remediation program. Mine tailings from sulfide rich ore is a potential environmental hazard due to its tendency to cause acid waters and heavy metal leakage. Lake Ensjön is situated one kilometer from the mine area. Due to the hydrological conditions it was not expected to receive inflowing water from the mining area.

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

These studies are done in behalf of Saab AB AVITRONICS in Järfälla in the form of a thesis atthe Royal Institute of Technology in Stockholm.The task was to examine the parameters that plays a role in the construction of modern radomesoperating in broadband applications.This was interesting for Saab to get an indication of which way they should go at the newdevelopment of radomes for the next generation of equipment for electronic warfare.After a thorough analysis of the influencing parameters, a optimization application was made toget a automated way to get a radome design by specifying data on the radome size, airloads,materials, etc.This is to minimise the time of the laborious work that radome development.inply.This was solved by letting ANSYS calculate the strength of the radome structure and MATLABcalculate electromagnetic data and cost models of different sizes and materials.All these parameters woven together with the optimization tool modeFrontier picks data from therespective program and perform an optimization algorithm and then iterate a step and sends thisdata to calculation programs for the new input data. In the end, we have received a convergedpoint with our optimal solution.For the presumptions and limitations for which applied for this thesis, the result was prettyintuitive. That is to say that the smaller radome - the less materal is needed and lowermanufacturing costs results in the cheapest solution possible. The reality is not so simple. Whereyou have to take more of the electrical details such as the effect on the transmitter as a majorfactor..

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

The aim of this study is to increase the understanding of the causes of the first war between Russia and Chechnya. Empirical data consists of four half-structured interviews with former Russian and Chechen war participants that tell about their perspective of the causes of the war between Russia and Chechnya. The study used narrative method and the theoretical framework consists of International Relations theories such as Realism, Geopolitics, Liberalism and Marxism. Geopolitics sees the geostrategic interest, territory as a cause of war. According to realism warfare occurs because of the state?s endeavor after power and influence in term of territory.

In studying the art of Counterinsurgency Warfare we are usually inclined to the reading of several books regarding this matter. Because of this some writers have the power to influence the minds of the reader. This can be of great benefit since it enables information sharing and for the reader a chance to learn from the triumphs, but also mistakes of others. However each writer is the creation of the time and context under which he existed. Because of the wheel of time certain things change, and because of the context a myriad of factors came into play affecting the outcome and product of the doings and thoughts of that specific occurrence.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

I denna uppsats har filmljudet i krigsfilmerna Apocalypse Now och Saving Private Ryan undersökts. Detta har gjorts för att försöka bidra med ökad förståelse för filmljudets användningsområde och funktioner, främst för filmerna i fråga, men även för krigsfilm rent generellt. Filmljud i denna kontext omfattar allt det ljud som finns i film, men utesluter dock all ickediegetisk musik. Båda filmerna har undersökts genom en audio-visuell analys. En sådan analys görs genom att detaljgranska båda filmernas ljud- och bildinnehåll var för sig, för att slutligen undersöka samma filmsekvens som helhet då ljudet och bilden satts ihop igen.

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink.