In my project I worked with fluorescent color and fear as a theme together. It was based on my question for what happens when you take all the lights out and highlight a fear or phobia. I wanted to experiment and explore the course of event within the surface of a picture by using this kind of paint.I worked with illustration and pattern to bind the two pictures together. The aim was to investigate what is possible with the picture as a medium and work with contrast to make it as effective as possible. My goal was to make one poster of each fear and to make them work together as a series as it?s best.I asked myself many questions such as;? What happens to the surface, image and room when you use this color?? Will a new quality appear?? What happens when you mix two pictures together on a parallel level that only show in different kind of light?.

The aim of this project is to find a concept solution for a wireless transmitting system, installed to transmit data from a hydrophone of the ocean floor down by a wave power generator to the office on shore. The project is a literature review in which previous observations and tests are analyzed and put together to find a solution. The result was a comprehensive solution that includes an acoustic modem to transfer captured information from the bottom to the surface, wirelessly through the water. The information is then sent fron the surface on radio waves through the GSM network to the office on land. Between under and over water there are components to convert information between acoustic waves and radio waves, but also various types of modulation, such as amplitude and frequency modulation is required..

Detta examensarbete har utförts vid Linköpings universitet i samarbete med Scania Transmission i Södertälje och behandlar kravsättning av ytstrukturer samt processer för hårdbearbetning av kugghjul och axlar. Aktuella artikelritningar innefattar endast krav för Ra-värde, den aritmetiska medelavvikelsen för ytjämnhetsprofilen (R-profilen). Förslag på nya parametrar enligt av Scania tillämpade SS-EN ISO standards har tagits fram, detta för att ge en noggrannare beskrivning av vilken ytstruktur som skall uppnås. Resultatet är generellt tillämpningsbart men fokuseras mot kugghjulens hål, plan och diametrar. Vidare presenteras en jämförelse mellan metoder så att transmissionsverkstäderna kan tillverka kugghjul/axlar på ett kostnadseffektivare sätt.

AbstractConsider a ?uid being heated from below. The heating leads to an upward convectiveforce that is counteracted by the viscous forces of the ?uid. If the convectiveforce is large enough in comparison to the viscous forces the ?uid will be put in anunstable state.

Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

AbstractConsider a ?uid being heated from below. The heating leads to an upward convectiveforce that is counteracted by the viscous forces of the ?uid. If the convectiveforce is large enough in comparison to the viscous forces the ?uid will be put in anunstable state.

Glass has sophisticated front properties and are used as facades in high buildings. During cold periods, these glass facades could cause thermal discomfort, due to cold downdraught. Cold downdraught can be countered by placing heaters under glass surfaces. Nowadays technology offers highly insulating windows, which is why there is an interest to investigate the indoor climate with only underfloor heating. The research in this area is limited, and few empirical methods are available.

Österbyverken is an industrial estate in Östhammars municipality in Uppland, Sweden. Many different activities have taken place on the estate the last 600 years. During the last 15 years both health and environmental studies have been made by different companies. At the most recent study a great increase of metals in Nerån, a river that runs partly through and partly next to the estate, was identified with mass balances. The purpose of this thesis is to accomplish a deepened study about the reasons for the increase of metals in Nerån.

Delineation of recharge areas for aquifers is performed in the groundwater mapping process at the Swedish geological survey, SGU. This work is time consuming and performed manually. It is therefore desirable to develop a more general and repeatable method for defining recharge areas for aquifers.The purpose of this study was to investigate two other possible methods to delineate recharge areas for aquifers. The first method was to examine the possibility of using the topography of the bedrock to define the recharge areas for aquifers. To enable this, a method for generating the topography of the bedrock was developed.

AbstractSurface-water includes different kinds of pollutants from traffic and roads. To prevent these pollutants to reach nearby lakes one can construct surface-water ponds on locations with heavy traffic. At Bergviks shopping centre in Karlstad, two ponds, one smaller and one bigger has been constructed in order to decrease the pollutant pressure from the receiving waters of Kattfjorden. Several heavy metals are essential for plants and animals in low concentration but when they occur in higher concentrations, they become toxic to the organism. The larger pond at Bergviks shopping centre has a sedimentation function so the heavy metals sink to the bottom thereby not releasing directly in to Kattfjorden.

This project has been about illustration, text and format with illustration as the main communication path.A study has been made of how these three elements interact, particularly how text and format affect the illustrations. The goal has been to create an illustrated story in a form of a book. The story is about the feeling of being alienated from other people and invites the reader to make their own interpretations. The main target audience has been the ones who is interested in illustration and storytelling, no matter of age.Colors has been inspired from animated movies and the natur. Various textures such as wood, fabric and metal for example has been scanned to create a rough feeling.

Lake lowering in sulphide-rich areas is currently a major environmental impact for surface water. This study focuses on whether there is a relationship between a gradient of lake lowering and surface water impacts in areas of sulphide-rich sediments, in order to better understand their contribution of heavy metals and sulfuric acid. Also, is it a reasonable method to use the reduced lake area in order to quantify the gradient? The survey was conducted by collecting water samples from reference lakes and lowered lakes from south to north in coastal areas within the county of Västerbotten. Water samples were then analyzed for TOC, pH, conductivity, anions, base cations, alkalinity, acidity, sulfate, Al, Cd, Fe, Mn, Cu, Zn and Pb.

This is a booklet with information and inspiration about precast retaining walls. The three chapters contain information about concrete as a material, how the surface of the wall can be altered, and a chapter with ideas for a new precast wall. I have obtained information through books, interviews, lectures and fairs. The retaining walls on the market do not correspond to the requirements of the Landscape Architects I have interviewed. I have therefore considered their opinions in the chapter containing my new ideas for new retaining walls.

Storm water is rain and melted snow that runs off, primarily from impervious surfaces.Future storm water management is facing the challenges of increased precipitation, asclimate changes, and increased areas of impervious surfaces due to the expansion anddensification of the cities. Impervious surfaces reduce the potential for water to infiltratein the ground leading to increased surface runoff and higher peak discharge.The runoff coefficient is closely related to the percentage of impervious surfaces andrepresents the maximum percentage of a catchment that can contribute to runoff. In thisstudy, the objective was to evaluate the weighted runoff coefficient for three differenturban types; apartment buildings, townhouses and residential areas and a comparisonbetween today and the 1970`s was made.The runoff coefficient was determined by manual mapping of the different surface typesin each area based on data in the form of orthophotos and aerial photographs. The surfacetypes that were mapped were asphalt, permeable areas, tiles, sand/gravel and roof.Tiles and sand/gravel were the most difficult surface types to map. In order to see towhat extent these categories influenced the weighted runoff coefficient a sensitivityanalysis was carried out and the runoff coefficient based on surface type was changed indifferent scenarios.The results of the sensitivity analysis showed that the surface types tiles and sand/gravelhad little impact on the weighted runoff coefficient which in mainly due to the fact thatthe percentage of these surfaces types of the total area is small.The result of the study showed that the largest change in the runoff coefficient occurredin residential areas where the increase in the percentage of impervious surfaces causedby new roofs in the form of porches and garages and from paved or tiled driveways.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.