Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Small pieces of plastic, termed ?micro plastic? in the oceans derive mainly from degradation of big plastics such as beach littering, but also from sources of direct emission from e.g. beauty scrubbers and synthetic sand-blasting. These micro plastics are ingested by marine animals ? mistaking them for plankton ? or via prey.

The background to the study is that within the next ten years about 50 new multi-purposeindoor arenas will be built. These are used for various events such as sports, concerts, etc. In order to achieve a high level of security in the case of danger alarm signals and alarmmessages must be heard well by the visitors. ÅF-Ingemansson wanted to show builders the importance of good speech perception and that it is not observed in arenas today. They conducted technical tests on two large multi purpose indoor arenas to develop parameters that affect speech perception in the arena.To get a subjective view of how these arenas are experienced a survey was created.

Phosphorus is essential to all plants and is taken up from the soil as the ion H2PO4 - (and to some extent HPO42-). Plant availability depends on, among other factors, the soil pH. In order to provide for plant available phosphorus, it is applied as mineral fertilizers and farmyard manure. However, that causes phosphorus leaching from arable land to surrounding surface waters and lakes and contributes to the eutrofication. There are three types of soils in Sweden that are at higher risk of contributing to phosphorus leakage.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.

Syftet med denna studie är att undersöka hur poliser inom den ingripande verksamheten hanterar de emotioner som uppstår i arbetet. Vidare avser studien även att undersöka vilken påverkan de emotionella aspekterna av arbetet får för poliserna.  Detta görs med hjälp av en kvalitativ metod i form av sex semistrukturerade intervjuer med poliser inom ett polisdistrikt. Studiens teoretiska ramverk består av begrepp inom emotionssociologin och socialpsykologin.Följande frågeställningar behandlas:Hur hanterar poliserna de känslor som uppstår i arbetet och hur kan detta karaktäriseras?Hur påverkar de emotionella aspekterna av arbetet poliserna, har det konsekvenser? Sammantaget visar resultatet att poliserna följer informella känsloregler som finns inom yrkesrollen och att dessa regler skiljer sig beroende på den situation poliserna befinner sig i. De hanterar även känslor i arbetet på ett sätt som kan beskrivas med Hochschilds begrepp surface acting och deep acting.

The purpose of this paper was to investigate whether Suzanne Retzinger?s linguistic cues for shame and verbal behaviors for hiding shame could be used to measure shame in surveys based on Thomas Scheff?s theory of shame. I created a measurement instrument consisting of 30 statements, which were all meant to measure general shame.The instrument was administrated to 180 respondents studying at Karlstad University, of whom 4 respondents were removed from the data set due to lack of standardization. With the polytomous rasch model used for the analysis, data from 176 respondents were analyzed, of whom 124 respondents were female and 52 were male.The result showed that the measurement instrument?s statements should not be used together because the analysis indicated multidimensionality.

Catecholamines are stress hormones that are produced and released by a rare tumor called pheochromocytoma. This tumor can cause hypertension which if undiagnosed and untreated leads to death. Since good therapy is available, it is important to find the tumor in time. The most common way to diagnose the tumor is measurement of the biochemical markers; catecholamines and their metabolites, methylated catecholamines.After observation that almost all normetanephrine results for women were higher than the upper reference limit and therefore pathological, the accuracy of the present reference intervals was questioned. Therefore new reference intervals for both urinary catecholamines and methylated catecholamines were developed by analysis of 46 samples using HPLC.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.