Title in original language: En undersökning av tre olika behandlingsmedels effekt påvegetabiliskt garvat läder för bokbandLanguage of text: SwedishNumber of pages: 32.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

The purpose of this thesis was to determine what materials should be used when creating a stimulating garden for intellectually handicapped people and whether there are materials that are better than others to use in this kind of environment. How the materials preferably can be used and how the environment should be designed to satisfy the need of each individual will also be discussed. Seriously intellectually handicapped people have the same level of intelligence as a normal 0-2 year old child. It is important to point out that these individuals can not be compared to a normal child in other aspects than the level of abstract thinking and perception of reality. As the grown up intellectually handicapped people have remained a lot longer on this stage of intelligence they have got more experience. (Kylén 1981) It is important with a lot of different experiences for the brain to develop normally, which implies the use of many different materials to achieve the best stimulation (Kylén 1981).

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

The Arctic region appears as a pristine remote environment, yet there is increasing evidence that it is greatly impacted by pollution such as lead (Pb) and mercury (Hg). In this environment deposition of Hg has increased threefold since the last industrial revolution. In this study five cryosolic soil profiles within non-sorted circles (NSC) in the Abisko region, northwest of Sweden, has been analyzed to improve our understanding regarding how pollutants are distributed within such type of soil. The soil samples have been analyzed with the use of X-ray fluorescence analysis (XRF), for the measurements of the total concentrations of e.g. lead (Pb) and zirconium (Zr).

Quadrotor UAVs are self-stabilizing, autonomous flying machines that has recently become more popular than ever. Unmanned Aerial Vehicles have their roots in the military, where they were developed for use in reconnaissance and combat. During the last few years, advances in the fields of electronic sensors, electric motors and microcontrollers have enabled smaller designs and autonomic flight control even for private use. The quadrotor, which is the particular kind of UAV we are looking closer at in this paper, has 4 rotors in an X-like formation. This configuration has many advantages such as good lift capacity, non-complex mechanical structure and serviceability.In this project we aquired a current overview of the domain and determine whether it is possible to construct a quadrotor UAV designed for use in a WISENET sensor network on a low budget and short time schedule.Based on existing community project AeroQuad, a quadrotor is constructed with a budget of about 500 euro.

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

Soft rubber flooring have gained in popularity over the last years. Rubber flooring al-lows cow to move more freely without slipping and improves claw and leg health. The purpose of this study was to investigate the influence of a stepwise introduktion of soft flooring on cow`s placement in cow houses with robotic milking. A case study was carried out in a herd in northern Sweden with 41 cows. Observations were made every 15 minutes between 09.00 and 16.00 concering cow placement in cu-bicles, in cubicle alley, in feeding alley and in feeding alley with the head through feed-ing gate. One observation period was carried out per flooring alternativ: 1) all concrete slatted floor, 2) rubber slatted floor in feeding alley and concrete slatted floor in cubicle alley and 3) rubber slatted floors in feeding alley and solid rubber floors in cubicle alley. The study showed that 6 %-units fewer cows lay in the cubicles when the feeding alley surface was slatted rubber.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

This essay is about how islam is illustrated in textbooks of History in Sweden during 1980-s and first decade in 2000.  This study does not aim to give all answers about those tendencies, but it will lift up and discuss this issues.The essay has two questions to answers. They are:1-      How does textbooks from 1980-s and 2000-s illustrate Islam?2-      Do we see any tendencies of Orientalism in textbooks?The most focus in this study will be in first question, because this question is more open and need more empirical material to answer. The second question is more specific and has to do with first questions results. The first part of off essays investigation has to do with description of what textbooks writtes about Islam. After this I will compare and analyze what differences they are between textbooks from 1980-s and first decade of 2000-s.

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

This paper gives an introduction to the theory of minimal surfaces. It is in- tended for undergraduate students with some basic knowledge of differential geometry and complex analysis.After defining the concept of minimal surface and giving a brief histo- rical survey, we look at some well-known minimal surfaces and a few of their characteristic properties. The connection between minimal surfaces and harmonic functions is discussed and the Weierstrass-Enneper represen- tation formulas are introduced. We also present Bjo?rling?s problem and give some examples. .

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.