Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The purpose of this thesis has been todesign an electric circuit that measurestemperature in three different ways. Asoftware was also designed to record andanalyse the measurments. The result of thecircuit was a PCB with inputs for 42sensors of both surface and non-surfacemeasurments. These all have a maximumerror of ±3°C..

This thesis investigates three different surface modifications, and the route to design and synthesize them. The thesis is therefore divided into three sub- projects. (i.) Design and synthesis of a peptide which secondary structure could be controlled by a negatively charged surface. (ii.) Design and synthesis of a cyclic peptide, that would self-organize prior to surface interaction, using the type I anti-freeze protein of a winter flounder as template. (iii.) The use of solid-phase synthesis to make the synthesis of SAM-molecules easier..

Användarupplevelser är en gren inom användbarhetsområdet som på senare år kommit att studeras alltmer. Orsaken till detta är att ny teknik medför andra krav på produkter än att produkter som sådana ska vara lätthanterliga. Produkten kan likväl ha som syfte att vara rolig att använda sig av.Studiens syfte var att studera användarupplevelser beträffande Surface-computing teknologi.Företaget Interactive Institutes innovativa Surface-computing produkt Virtual Autopsy Table fick exemplifiera Surface-computing teknologi i publika miljöer. Genom att använda denna uppmärksammade produkt som underlag är syftet att undersöka vilka designmoment som kan anses vara kritiska för upplevelsebaserad design. Studiens frågeställning blev:Vilka riktlinjer kan tas fram för att vägleda en designprocess att bli mer fokuserad påanvändarupplevelser vad gäller Surface-computing system?Med utgångspunkt från studiens datamaterial, så var en del av studiens syfte att ta fram riktlinjer.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

The purpose of this thesis is to examine and analyze how to improve the design of a Microsoft Surface SUR40 application. The application in focus was an interactive product browser developed by the company Spree, our external client. Spree is a multi-touch software provider, established in September 2010 and they expressed a need for suggestions for how to improve this application. Our work aimed at revealing how to make the application more suitable for several users and make it easier for them to interact simultaneously on the surface. From a qualitative standpoint we have examined how 17 users experienced the application.

By applying a segmentation procedure to two different sets of computed tomography scans, two geometrical models of the abdominal aorta, containing one inlet and two outlets have been constructed. One of these depicts a healthy blood vessel while the other displays one afflicted with a Abdominal Aortic Aneurysm. After inputting these geometries into the computational dynamics software FLUENT, six simulations of laminar, stationary flow of a fluid that was assumed to be Newtonian were performed. The mass flow rate across the model outlet boundaries was varied for the different simulations to produce a basis for a parameter analysis study. The segmentation data was also used as input data to a surface description procedure which produced not only the surface itself, but also the first and second directional derivatives in every one of its defining spatial data points.

Studien underso?ker mo?jligheten att anva?nda ledande partiklar besta?ende av silver- belagda kopparflingor, fo?r att tillverka konduktiva ledningsbanor pa? textilsubstrat. Syftet med denna studie har varit att tillverka de banorna med hja?lp av screentryck- teknik. Sammansa?ttningen av bela?ggningsformuleringen har en stor inverkan pa? den be- lagda textilen och de ledande egenskaperna.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

The surface finishing technique called black oxidation is currently being used on thetool holders made of low alloyed tool steel produced by Sandvik Coromant. Blackoxidation isn?t considered a sufficient technique because it doesn?t make the toolholders look like the quality products that they actually are. The reasoning behind thisis that the tool holders can show signs of corrosion after prolonged storing times orin countries with high humidity and temperature. The corrosion doesn?t decrease thetool holders performance, but the customers might believe otherwise.

Individual cellulose ?bers were studied to identify the transport and absorbtion phenomena as well as the in?uence of drying. A Chalmers University of Technologydeveloped method within ESEM (Enviromental Scanning Electron Microscope) has been used in this study. The results from the laborations gave the following conclu-sions: The transport of water occurs in ?bers in the ?ber wall surface and the lumen.

Self-compacting concrete has soon been around for a decade. Recently the prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.