One way of signalling commands to the horse during riding is through applying tension on the reins to create bit pressure in the horse?s mouth (Terada et al., 2006; Clayton et al., 2011). The skilfulness of the rider in using the hands when applying bit pressure has consequences both for the horse?s performance and welfare (Manfredi et al., 2010). At the trot there are large vertical deviations of the horse?s body which the rider must adjust and adapt to (Terada et al., 2006) and an unsteady hand due to inability to follow the horse?s movement can be a source of discomfort and conflict behaviour in the horse (Heleski et al., 2009).

Acrylamide (AM) is a commonly used monomer in the manufacture of polyacrylamide. In addition, AM has been found in heated foods that are rich in starch. The main dietary sources in Sweden tend to be crisps, French fries, fried potatoes, crisp bread, cookies and coffee. Un-fortunately, dietary intake of AM has in several studies been shown to cause cancer in ro-dents. Consequently, the compound is currently regarded as a potential carcinogen in hu-mans.

This M.Sc. thesis is a material application evaluation commissioned by the advanced body engineering department at SAAB Automobile AB. The purpose of the thesis is to evaluate implementation of the innovative sandwich design material Hybrix into an automobile body. Today the most commonly material used in the body is galvanized steel sheets and by shifting material to Hybrix several problematic issues have to be dealt with. Hybrix is an innovative sandwich sheet that inherits thin stainless steel face sheets and a stainless steel fibrous core.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

Summary Today energy prices are rising. As a result biomass fuel is getting more and more interesting. Wood chips is very popular, but also straw from grain production is on the table. Lunds Energi AB project a combined power and heating plant in Örtofta out of Lund. Wood chips is meant to be the main energy source, complemented by straw. In this thesis the transportation of straw for fuel is studied.

Parallel to new technological advancements, including the development of interactive recommender systems, digital music services on the Internet, such as Spotify, have in a short time span gradually replaced former physical media such as CDs and MP3-players and become pioneers on a market with an otherwise uncertain future. By subscribing to the service, users have access to a vast library of music and from any device with Internet access. In order to provide a satisfactory and useful musical experience, different ways of coping with the vastness is required - which is precisely what recommender systems are for. Improved filtering techniques and use of devices built in sensors, make way for new opportunities of more precise and contextually tailored suggestions for track selection, which in turn leads to potential privacy issues when using interactive music services. But where do we stand today? By compiling, exemplifying and discussing three different perspectives with relating to the development of interactive music recommender systems, the objective for this paper is to provide a for science, industry and user, objectively nuanced account of current potentials and expectations.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

The Chinese government´s aim to be self-sufficient in food production in combination with the increased food consumption in China has put high pressure on the productivity within the Chinese agricultural sector (He j et al, 2010). In order to increase the productivity, modernization and adoption of new farming techniques are essential. The opportunity to adopt and import foreign technology has lately been possible in China, as more authority and decision rights have been given to the individual farmers and the country has opened up for foreign trade (Zheng, 2012 & Fan, 1991). A more open Chinese market enables new opportunities for foreign agricultural companies to expand their businesses by introducing their products to Chinese farmers. But to succeed with this strategy the Chinese farmers must be willing to adopt these, for them new innovations. Minimum tillage is a tillage practice used worldwide that is suitable in northern China where drought and erosion are the main problems in the crop production (pers.com., Arvidsson, 2012). Potential users? opinion of new innovations such as minimum tillage is closely related to adoption (Rogers, 2003).

Purpose- The purpose of this project is to contribute to the knowledge of creating customer value through streamlining and coordination of patient flows for children and youth with frequent need of care on child and youth medical clinics.Method- One of the methods used for achieving the project's purpose is a case study on the Child and Youth Medicine Clinic at Länssjukhuset Ryhov in Jönköping. The case study has been used for collecting the empirical data that has been generated through interviews, observations and documents from the Child and Youth Health Clinic. Except the case study the authors also made studies in literature, which the collected empirical data has been anchored and related to. Together this led to the project's analysis and results.Results- When investigating the questions found in chapter one, it was determined standardized work is of great importance to create structure and implement procedures for the patient flows. A weak link in the patient flow has been identified, which is the sub-process coordination and planning.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

The information flow of today is endless and the advances in information technology astounding. In today's information society it is of utmost importance not only to be able to find the right information but also to evaluate the information. The expression ?information literacy? is not a new one but it has never been as pertinent and essential as today. Information literacy is however not something which is easily and swiftly achieved.Swedish youth education is based on problem based learning in which the students are expected to research for material, evaluate their finds and use their skills to produce a good written or oral presentation.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.

Over the past few years the Swedish forestry industry has become increasing interested in direct seeding. Although, in practice, this interest has been restricted to pine seed, the knowledge and techniques that have been developed for pine seeding can readily be transferred to spruce. Direct seeding is a method that is of interest to the forestry industry since it can lead to lower regeneration costs, denser stands and better root development than the more conventional planting method. This study evaluated experiments that focused on direct seeding of spruce in the northern Sweden. Skogforsk set-up the experiments in Gideå and Sävar in 2003.