The purpose with this bachelor thesis is to identify risks and insufficiencies concerning the production at WilloMaskin AB. The project is limited to only 4 machines, where theories as ?OEE? (overall equipment efficacy) should be illuminated and analyzed. The theory of ?Single Minute Exchange of Die? is also presented.The method used in this project is mostly based on qualitative studies but also quantitative studies are presented.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

When a family member is being cared for in palliative care relatives often need support to be able to support their family member. The purpose of the literature review was to illuminate the nursing staff?s support from the relatives? perspective when a family member is being cared in a late palliative phase. The study is a literature review, there already existing research are surveyed. The findings were structured into two parts, tangible- and the intangible support.

Adaptive Resource Allocating Vector Quantizer (ARAVQ) är en teknik för datareducering för mobila robotar. Tekniken har visats framgångsrik i enkla miljöer och det har spekulerats i att den kan fungera som ett generellt datautvinningsverktyg för tidsserier. I rapporten presenteras experiment där ARAVQ används som datareducerare på en artificiell respektive en fysiologisk datamängd inom en datautvinningskontext. Dessa datamängder skiljer sig från tidigare robotikmiljöer i och med att de beskriver objekt med diffusa eller överlappande gränser i indatarymden. Varje datamängd klassificeras efter datareduceringen med hjälp av artificiella neuronnät.

When a family member is being cared for in palliative care relatives often need support to be able to support their family member. The purpose of the literature review was to illuminate the nursing staff?s support from the relatives? perspective when a family member is being cared in a late palliative phase. The study is a literature review, there already existing research are surveyed. The findings were structured into two parts, tangible- and the intangible support.

The aim of the work was to gather information on parents' reflections on their own need for parental support in their role as parents. Where a need was expressed we investigated what form of support was desired and who should provided it. We also wished to find out if there were any differences or similarities in the needs and wishes expressed by the parents.The questions posed were: Did the parents feel that they needed support in their roles as parents? If so, what sort of support did they want? Who should provide this support? What differences or similarities were expressed in the parents needs and wishes for support?A questionnaire study was carried out within Landskrona. The results showed that a majority of parents expressed a limited need for some form of support in their parental role.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Ditch cleaning is increasingly important in Swedish forestry. This study compare different concepts concerning machinery, namely two general-purpose excavators of different sizes, 8 tonnes and 15 tonnes, versus a dedicated machine constructed solely to deal with ditch-cleaning. The machines were tested on rough as well as on gentle terrain and on open terrain as well as in young stands in connection with thinning. The conclusions were that the excavators are more versatile and have greater capacity than the dedicated machine, while the latter excels in quality of work. Interestingly, there was no significant difference in performance between the both excavators..

This study was conducted on a property with a thinning machine team. The purpose was to investigate in which machine, the harvester or the forwarder, that caused most damage to the trees in six different stands. Different factors, related to the damage frequency in the stands, were checked out. For example: basal area per hectare, thinning strength, tree diameter and the rate of production. The harvester drivers were also interviewed about how, when and why stem damages occur and how to minimize them. The study stated that 4.3 percent of the trees were damaged. Out of these 88 percent was caused by the harvester and the rest, 12 percent, by the forwarder..

I made this examination essay to investigate the possibilities and problems with machinery import. The rules intend to loaders and agriculture machines are still pretty flexible. It is today rather simple to make a registration or inspect those machines. There are still some practical problems to be aware of. It is very important to have the right contacts abroad, it is not always that you have time or moment to inspect the machines before purchase. In that case you have to trust your contact or partner about condition, equipment or working hours of the machine. Another important thing is payment before delivery: There is a huge risk that you do not get the machines that you paid for. If problems come up, you need to know the laws, your rights and your duties. A Swedish company does not pay any value-added taxes when it buys from another member of the European union. On the other hand must the machine be sold included value-added tax, if the buyer is a Swedish company.

This master thesis was performed as a mission from Holmen Skog with the purpose to investigate to which extent their own machine teams and engaged contractors were exposed to theft and vandalism, and most common preventive measures used. With the help of collected data the study should lead to proposals of preventive measures that can help the machine teams in their struggle to minimise theft and vandalism. Theft and vandalism are a big problem for Swedish forest contractors. In a scarce economic situation thefts and vandalism rapidly decrease the profit for the contractors. However, the last years have resulted in a positive awareness of thefts, and more and better preventive measures have been developed. With the initiative of this master thesis, Holmen Skog show that they are aware of the situation and that they wish to take control of the problem. A total amount of 108 questionnaires was sent out to Holmen?s own machine teams and engaged contractors.

The purpose of this study is to give a picture of the current status for the recruitment to forest machine operator educations in Sweden, how many the educators are and the outcome of this activity. The three at present different types of education are upper secondary school, polytechnic school and vocational school. The method used for the survey is telephone interviews, pre-broadcast issues were discussed and the responses were recorded. The results are then compiled and presented in linear form. The conclusions one can draw is that education is desirable and important. To get young people interested in forest machine operator education it is very important that the forest industry continues to develop attractive employment..

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.