Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

The aim of this study is to find out whether there is any difference to be found in the attention ability before and after physical activity. The method used in this study was made of an experimental design. The participants were chosen through a cluster sampling and thereafter divided into a control group and an experimental group. A total of 64 pupils from upper secondary school participated in the study, 25 of them in the experimental group and 39 of them in the control group. Since the measure was repeated, both in respect of time and the comparison between the groups, a mixed design was used.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

The aim of this thesis is to investigate how a valuation model of a Private Equity firm is interpreted into a management control system within the company's different organizational levels. A case study was developed based on the infra-net company Eltel. The management control systems developed by Malmi and Brown (2008)(1) was used to characterize the control systems at each organizational level. The building blocks of this system are planning, cybernetic, reward/compensation, administrative and culture. Miller and O'Learys (2007)(2) theory of mediating instruments and technology roadmaps was applied to analyze the mediating process of the valuation model.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

I vår produktion har vi tagit fram ett system för order- och lagerhantering, med vikt på realtidsuppdateringar, åt en extern mottagare där infrastrukturen inte hängt med i företagets utveckling. Vi valde detta projekt i syfte att bredda våra kunskaper inom både programmering och projekthantering. Denna slutreflektion tar upp den förundersökning vi gjorde för att kunna besluta om vilka verktyg vi använde i utvecklingen, den tar även upp vårt sätt att hantera och planera projektet. Under projektet har vi arbetat med en egenutformad arbetsprocess vilken även beskrivs här. --- Our production has been to design a system for ordering and supply management with emphasis on realtime updates to an external recipient, where the infrastructure has not kept pace with the development of the company.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

Background: Diabetes is a common disease where the degree of self-management is of paramount importance. Individual factors influences both cooping and general wellbeing among diabetic patients. Glycemic control is known to be important but other factors ought to be considered. Aim: The aim of this study was to describe how individual self-management influences the general wellbeing among adult diabetic patients. Method: This literature study is based on scientific articles.

Tron på den egna förmågan (self-efficacy) och upplevelsen av kontroll (locus of control) påverkar människors agerande och bedömningar av sina möjligheter. Syftet med undersökningen var att öka förståelsen för hur studenter från psykologlinjen i Stockholms Universitet bedömde sina chanser att få ett arbete direkt efter utbildningen. Fyra studenter deltog i undersökningen och data samlades genom kvalitativa halvstrukturerade intervjuer. Resultatet visade att möjligheterna till att få arbete efter examen ansågs vara goda men att den praktiska tjänstgöringen för psykologer, PTP, sågs som en flaskhals. Erfarenhet, kontakter, ålder, kön och utbildningsinriktning ansågs kunna påverka möjligheterna till att få en PTP-tjänst och påverkade också deltagarnas bedömning av sina chanser.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

Since the early 1940s in Sweden, subsidies have been a recurring feature in housing politics.Throughout history, these have been used as a management measure to control theconstruction of housing and to promote the Swedish welfare state. The political parties aretoday disagreeing on how much responsibility the state should carry for citizens housing. Tosolve the conflict, the dwelling has to be defined. Is the dwelling to be considered a socialright, like education and healthcare or is the dwelling to be considered a product for the freemarket, driven by supply and demand?The positive population growth in Stockholm has lead to an increased demand for dwellings.The supply of dwellings has not been growing at the same rate, which has implied higherhousing prices and longer wait for rented apartments.

The purpose of this thesis is to examine how the Management Control System is affected by a change in the owner structure from family owned to not-family owned. The study also tries to identify explaining factors behind the possible effects to the Management Control System. The study is based on a comprehensive case study on the company Alcro-Beckers which, in year 2001, was acquired from the owner Lindéngruppen fully owned by Ulf G Lindén. The acquirer was the non-family owned company Kemira OY, a Finnish stock listed group. The empirical foundation mainly comes from interviews conducted with people who were/are directly connected to the company, either as employees or as representatives for the owner.