The lifecycle of fashion products get shorter and shorter. Companies in the fashion business needto make sure that they can offer their customers the right products, in the right quantity at theexact right time. The competition on the fashion market today is tough and if companies aregoing to be successful they need to have access to the most reliable suppliers, and also offer theircustomers products with high quality to attractive prices. It is therefore of highest importance toevaluate and choose the right sourcing strategy. Product category and type of organisation aresome of the factors that will determine which strategy that is most appropriate.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

This study investigates how consumer attitudes toward a company are affected by the company?s Corporate Social Responsibility work and their marketing efforts thereof. The Swedish fast food chain ?Max? provides the empirical setting. The theoretical framework for the study is based on Vanhamme and Grobben?s (2009) model regarding CSR?s effect on a company?s reputation, which is connected to perceptions? effect on attitude based on Fishbein and Ajzen?s (1975) theory.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

AbstractThis study focuses on three generations of Kurdish women's view on honor. The study is a qualitative research based on three individual interviews. The aim of this study is to examine how three generations of immigrant women from a culture of honor is influenced over time by the majority culture and its values together with how these women affect each other mutually both consciously and unconsciously within the family. The study is based on two questions: What does"honor" mean to the three generations of women who are Muslim and Kurdish? Did these three generations of women?s idea of honor change over time as they have lived in Sweden? Results of this study have shown that the concept of honor has its focus on the woman's body, sexuality and chastity.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

The presence of nostalgic emotions during consumption is often seen as something purely positive to a product. To evoke these emotions has become a very common tool in marketing and advertising. Paradoxically very few studies have focused on the effects of nostalgia. The purpose of the thesis has been to understand how the presence of nostalgic emotions during consumption effect consumers. The research model used is a quantitative study with testing of hypotheses generated from theory.

Anbudsprocessen på Balfour Beatty Rail i Västerås står inför en förändring då man vill införa ett nätverksbaserat kalkyleringssystem. Examensarbetets avsikt är att fokusera på anbudsprocessen med fokus på kalkylarbetet för att se hur dessa kan effektiviseras, samt för att se hur arbetet med kalkyleringen ska utformas på bästa sätt vid övergången till den nya plattformen.För att komma fram till hur anbudsprocessen ska kunna förbättras och designas på bästa möjliga sätt har detta bland annat lösts med hjälp av semistrukturerade intervjuer med alla som är involverade, för att få en insyn in i processen på en detaljnivå som tillåtit mig att modellera processens utgångsläge. Då företaget har utryckt en önskan om att ?skapa en ?lean? anbudsprocess? har målet varit att förbättra processen med hjälp av den teori som är tillämplig (operations management, TQM, MIS, project management med mera) samt även att underbygga den med teori om lean enterprise och undersöka möjligheten för ett större åtagande av ett lean system.Efter undersökande av processen har en rad förbättringar föreslagits som till viss grad kunnats illustreras med en ny processkartläggning. För att optimera organisationens arbete med att producera anbud har det konstaterats att beslutsprocessen som leder fram till ett åtagande av produktion av anbud varit för lång och behöver effektiviseras genom att bland annat förbättra beslutsunderlaget innan ledningen träffas, att korta beslutsvägar och att ha möten minst två gånger i veckan.

Under 1900-talets senare hälft har lönesättning via enskilda lönesamtal, så kallad individuell lönesättning blivit den rådande lönebildningen i offentlig verksamhet. Tidigare utgick den offentliga sektorns lönebildning från löneskalor och tarifflöner, så kallad lönetrappa efter ålder och erfarenhet. Den offentliga sektorn kan anses vara en komplex organisation på grund av dess krav på demokrati, hushållande med samhällets resurser och tillämpande av offentlighetsprincipen. Dessa kan ha en påverkande effekt på hur lönebildningen ser ut samt den individuella lönens funktion som belöningsincitament och styrmedel. Syftet med detta examensarbete var att genom en intervjustudie med fenomenografisk ansats undersöka vilka uppfattningar som fanns ute i den offentliga verksamheten kring den individuella lönen och dess effekter.

At the moment in central Täby there are small district heating network operated by Fortum Heat. The distribution network has an annual heat demand of about 70 GWh, which is supported by the network's two plants, Galten and Farmen. Täby as a region is rapidly growing and there are grand plans to develop the area. Estimated market potential for a future district heating expansion in Täby is very high and as early as in 2007 Täby decided to invest in a large-scale expansion. In autumn 2009 Täby did a procurement process, known as the ?Täby initiative?, to find a partner that could implement those expansion plans. To secure a cheap basic production the partner also need to build a power plant at Hagby recycling center. Despite high interest during initial state of the process, only one procurement offer were received and Täby suspended the contract in March the following year.

This paper investigates strategic opportunities for film festivals in a digital film business, with emphasis on Göteborg international film festival and the Swedish film industry. Using a theoretical framework of strategy analysis, the film value chain is examined with special regards to disruptive technology, and the film festival's unique resources are linked to industry structure. It is shown that relationships between actors and across sectors are crucial features of the film industry, and hence a network perspective is added to the theoretical framework. Barriers to entry are shown to be relatively low in all sectors except the cinema market, and it is proposed that film festival's could expand into digital distribution, taking advantage of brand strength, customer loyalty and knowledge of industry. The study adds to the mounting research on film festival practice and its significance for marketing and distribution in the film industry, and highlights the emergence of strategic openings in destabilized networks..

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

The manufactory industry, due to decline in profit margins, is seeking new business opportunities by moving towards servitization and value-adding services in after-sales. We have therefore conducted a case study to investigate a manufacturing company in their current transformation towards servitization. By studying the management perspective, we aimed to understand how Information Technology, by adding value, could play a role in the transformation process. This study shows that information technology can take an integrating role, by supporting new value-adding services to provider and customer, as well as a co-creating role, where both provider and customer benefits by learning from each other, in the changing work process initiated by new services. The study has also shown that Information Technology, together with organization, information and people, are crucial components in the manufactory industry?s transformation towards servitization.  Furthermore, the study has also shown that the value chain has the potential to drastically change due to the value-adding that the information technology brings to the progress of servitization..

This thesis serves to examine how manufacturing SMEs consider outsourcing. Furthermore, we aim to identify the main characteristics and patterns for these types of companies that can explain their rationale in such a decision. The chosen method for this thesis is abduction and selected research approach is multiple case studies. Seven case studies have been conducted at EAB AB, Esbe AB, Hörle Automatic AB, Pelly Industri AB, SGV Industrier AB, Swede-Wheel AB and Wulkan AB. Our findings have illustrated that although traditional outsourcing theory provides a good platform for explaining the rationale behind outsourcing decisions in SMEs, we have identified additional considerations that SMEs, operating as 2, 3 or 4-tier suppliers towards OEM-corporations, make.