The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.

The aim of this Master's thesis is to examine the contemporary educational tasks of the Swedish public library as they manifest in Swedish library journals. Our main question at issue is: Which educational discourses are there? And in relation to our main question: how do the concepts of information literacy, lifelong learning and adult education relate to each other? Is there an antagonism between the public library's duty to supply fiction as opposed to non-fiction? and: What are the consequences of these discourses in the service provided by the library?Our theoretical starting-point is the discourse theory as proposed by Ernesto Laclau and Chantal Mouffe. We analyse 39 texts from four Swedish library journals: Ikoner, bis, DIK-forum and Biblioteksbladet. The analysis is done in two phases.

Volvo Aero Corporation är en stor leverantör till de tre stora flygmotortillverkarna, General Electric, Pratt & Whitney och Rolls Royce. Komponenter som företaget producerar används i över 80 % av dagens kommersiella motorer. Nya motorprogram, där Volvo Aero eftersträvar att ha en mer aktiv roll gällande design och utveckling, har lett till nya utmaningar för företaget. Samtidigt har en komplicerad leverantörsmarknad, bland annat på grund av konsolidering, blivit svårare att hantera. Av denna anledning finns ett intresse av att förbättra företagets relationer och samarbeten med sina leverantörer, bland annat för att höja effektiviteten och sänka kostnader och ledtider.I ett led att klara detta, gav Volvo Aero oss uppgiften att studera och analysera teorier kring hantering av leverantörsrelationer för att se om vi kunde hitta passande modeller som är applicerbara på de nya situationer som företaget står inför.Vi utförde studier av en mängd teorier, och sökte att finna vilka som passade Volvo Aeros situation bäst.

This bachelor thesis examines the relation between countries? degree of economic freedom and their economic performance. Economic freedom as a concept is defined as the degree of market economy within a nation.The variable of measure that is used is the Frasier institute Economic freedom of the world index (EFI). The paper is built upon the Solow growth model and is extended by incorporation of additional variables; among which of course economic freedom. The study is performed through regression analysis, based on the neoclassical model both on rich countries, poor countries and on all investigated countries.Two investigations are performed: i) the impact from economic freedom on countries level of GDP per capita and ii) the impact from economic freedom on the growth rate in GDP per capita.The finding is that economic freedom can be seen as a relevant determinant of differences in GDP per capita growth rates between nations.

One of the biggest changes which have affected businesses during the last ten years is the accelerating speed at which Internet technology and e-commerce has developed. If Internet earlier was used in the purpose to entertain it is now accepted as an essential business tool and companies are investing more of its resources in e-commerce activities. Everyone ?has to be on the net? today but that implies a challenge in matching e-solutions to the company?s business goals. It is necessary to have clear goals, carry out research and plan a strategy in order to operate an optimal e-commerce website for the company?s needs.The purpose with this dissertation was to see how well companies adjust to new demands in the rapidly changing e-environment.

The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

More efficient energy consumption is essential to secure a sustainable future, not least within the building and real estate sector which answers for approximately 40 % of the EU countries total energy consumption. One part of EU: s work to reduce the energy consumption is the directive on energy performance of buildings which among other things have lead to stricter demands on energy performance in new and renovated buildings.One of the difficulties with making buildings more energy effective is that it often demands big investments and although it results in lower operating costs the extent of these savings and therefore also the repayment time can be difficult to decide beforehand. To make it interesting for property owners and also tenants to invest in energy efficient buildings powerful incentives are needed. Favorable loans to energy efficiency projects are one example of governmental instruments that have been tested in other European countries with good results.Reduced operating costs appear to be the main incentive for property owners to make their buildings more energy efficient. The best result of an energy efficiency project is usually achieved by cooperation between property owners and tenants but in order to make that interesting it is important that both parts can profit from the savings.

The purpose of this bachelor´s report is to expand the knowledge about heat supply of a small house in Malmö. The heat supply will be provided from solar panels in combination to two accumulator tanks which will storage the up heated water and a pellet boiler.The technique used here is warmth storage in water over seasons, which will provide the total need of heating for the house. Accumulator tanks in combination to solar panels gets more and more common in Sweden but this far it´s unusual to use it for storage over seasons. This report will highlight many of the difficulties associated whit heat storage and give information about a system's possible design and function.The design of this system is decided early on. An accumulator tank is placed 2 meters down in the earth on the backside of the house.

This study aimed to explore how 31 collage students' cognitive performance and their ability to create false memories were affected by the exposure of an extraneous background noise. The studies main hypotheses were based on previous research on how extraneous noise affect the cognitive ability and the creation of false memories: 1) that an extraneous background noise increases the ability to create false memories, 2) that an extraneous background noise impairs the learning of cognitive information, 3) that an extraneous background noise contributes to an increased representation of fictional words, 4) that an extraneous background noise impedes the ability to understand speech . The results showed a tendency in which false memories increased in the condition without background noise, a result which goes in the opposite direction of the hypothesis. Furthermore, the result supported the hypothesis that the extraneous background noise impairs the learning of cognitive information. The results also showed that there was no effect between the conditions regarding the representation of fictional information.

Abstract Integrated mental training is a method that entails a systematic and long-term training of mental processes (thoughts, images, emotions) that aims to enhance performance as well as gratify feelings and improve thought processes. This training develops an alternative system of control by using substitute state of consciousness and self-hypnosis. The method is concerned with both mindfulness and performance approaches, which is crucial in order to feel and function better. The intent of this study is to highlight the experience of the different steps of integrated mental training to gain an understanding of how, where, and when changes occur. To achieve the objective of this study, a qualitative empirical method was used.

This degree project has been done in parallel to the advertising agency Hera in Uppsala, and containsthe creating of a logotype and graphic profile for Aircall, a new big chain of shops dealing with telecommunication.Aircall was found 1 February 2004, when three smaller companies became one. Thisnew company were in need of a common brand and a uniform profile. The created graphic profile hasbeen applied to visiting cards, letterhead, envelopes, letter cards, bags, cars and advertisement. Thegraphic profile has also been used when designing the shop interior end exterior. Research has beendone on competitors graphic profiles and advertisement.

Bakgrund: Prestationsmätning syftar till att implementera ett företags strategi. För att lyckas med det krävs tillgång till relevant information för att ta rätt beslut. Nya alternativa organisationsformer som shared service centres har lett till en ökad efterfrågan på ny anpassad ekonomistyrning. En förfrågan om att utvärdera P2P-processens prestationsmätningssystem på IKEA AB, Finance Services ledde till utvärderingsstudien.Syfte: Syftet med utvärderingsstudien är att utveckla en modell med dimensioner, för att analysera prestationsmätningssystem på shared service centres. Analysmodellen kommer appliceras på P2P-processen inom IKEA AB, Finance Services.

Radio Frequency Identification RFID är en teknologi för att kunna identifiera produkter via radiovågor, detta med hjälp av radiosändare. Denna uppsats intresserar sig för hur RFID kan användas i tillverkningsföretag och om tekniken kan förbättra och förenkla materialflödesprocesserna. RFID är en relativt komplicerad teknik därför har denna uppsats som syfte att ge företag praktiska tips inför en implementering. För att kunna besvara problemformuleringen har Hästens Sängar AB används som praktikfall. Intervjuer har även gjorts med RFID leverantörer och av företag som idag använder RFID, för att få det praktiska perspektivet.RFID används mer och mer i tillverkningsföretag även om utvecklingen har gått långsammare än förväntat.

The district heating load is seasonally dependent, with a low load during periods of high ambient temperature. Thermal energy storage (TES) has the potential to shift heating loads from winter to summer, thus reducing cost and environmental impact of District Heat production. In this study, a concept of high temperature borehole thermal energy storage (HT-BTES) together with a pellet heating plant for temperature boost, is presented and evaluated by its technical limitations, its ability to supply heat, its function within the district heating system, as well as its environmental impact and economic viability in Gothenburg, Sweden, a city with access to high quantities of waste heat.The concept has proven potentially environmentally friendly and potentially profitable if its design is balanced to achieve a good enough supply temperature from the HT-BTES. The size of the heat storage, the distance between boreholes and low borehole thermal resistance are key parameters to achieve high temperature. Profitability increases if a location with lower temperature demand, as well as risk of future shortage of supply, can be met.