Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.

Demand has become increasingly difficult to forecast in today?s volatile markets. Being able to produce towards real demand is becoming vital for companies, since inventories of finished goods are expensive to maintain and because miscalculated products tie up capital that in the end is never repaid. More and more companies are using postponement strategies to delay the process of producing until real demand has become known. Tooling Support Halmstad is a company within the manufacturing industry, which has become aware of the benefits with postponement strategies for parts of their production.

In this experience-based essay, I give examples of events that take place during a typical day at preschool. By highlighting these everyday events, I discuss around the parental role and its importance for children and child development. I apply a historical review when it comes to views on children and child rearing, and reflect on different approaches that we have towards the children. In the discussion, I reflect on the Childs need for boundaries, and thereby try to understand why we act differently in this respect. To gain more knowledge and understanding of the events I have taken help from theories in literature and from my own practical knowledge.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

The dependency of continuous electricity supply is high in the Swedish society today, at the same time no one is willing to pay for a too costly or over dimensioned power distribution system. The owners of the distribution systems are the ones responsible for this balance act of maintaining a high quality of electricity delivery to customers at a reasonable cost.In this master thesis a limited part of the primary distribution system (10 kV), owned by Mälarenergi Elnät AB and located in the city centre of Västerås, was chosen for a deeper analysis of its reliability. Its ability to handle outages of system components (N-1 and N-2 contingency analysis) was investigated to find out potential weak spots and parts of the grid that showed signs of being overdimensioned.The results of the performed simulations showed that in 74 % of the studied N-1 contingencies cases, consisting of outages of a bus bar in a distribution substation, the system could handle this without causing outages in other parts of the grid. For the N-2 contingencies 61 % passed the test. It was also found that one of the two included high voltage substations could alone supply the investigated part of the grid.

Bakgrund: Globalisering har gjort försörjningskedjan till ett komplicerat nätverk med många påverkande faktorer. I försörjningskedjan är valet av anläggningars position viktigt för att företag ska behålla sin konkurrenskraft. Valet av lagerlokalisering har stor påverkan på ett företags framgång.  Problem: Lagerlokalisering är en komplex process med många faktorer som påverkar, att praktiskt tillämpa existerande modeller är komplicerat. Det saknas ett konceptuellt ramverk för lagerlokalisering. Syfte: Syfte med examensarbetet är att skapa en konceptuell modell för beslutsfattandet för lagerlokalisering för mindre företag, att finna relevanta faktorer samt att praktiskt göra en förstudie för ett företag med verksamhet i Norra Europa.

Few generations have gotten as much media attention as Generation Y. Growing up in the digital age Generation Y has become very different from previous generations. An interesting topic is if this is reflected in the way Generation Y act as leaders. The purpose of this study is to describe what kind of leadership Generation Y prefers, to explore how individuals belonging to Generation Y act as leaders and finally to investigate if there is a discrepancy between these two perspectives and if so try to understand it. By reviewing existing research and conducting depth interviews with employees and managers at a Swedish bank we recognize preferences in a number of categories, which Generation Y require from leaders.

The purpose of this thesis is to ascertain the main determinable factors of Swedish SMEs capital structure decisions and to investigate whether existing capital structure theories are applicable on Swedish SME financing. We have used panel data to run regressions of various capital structure determinants on three measures of capital structure; short- term debt, long-term debt and total debt. We found that growth opportunities, profitability and age are the most important capitalstructures determinants for our sample. Firm size shows a small explanatory result but the effective tax rate and the asset tangibility do not seem to explain the capital structure at all. Thematurity matching principle is considered significant..

Mitt examensarbete går ut på att undersöka möjligheterna att förenkla de moment inom den traditionella färskvirkestekniken som är tidskrävande utan att tillföra något till uttrycket. Syftet för arbetet är möjliggöra snabba beslut för att underlätta en inspirerande arbetsprocess där formen skapas samtidigt som produkten.Jag har utgått ifrån maskinverkstaden på Carl Malmsten Furiture Studies och tillverkat en ställbar borrmall där olika vinklar på ett snabbt sätt kan ställas in och där ämnet kan spännas fast trots att det är assymetriskt. Jag har i samarbete med Ulf Bengtsson, forskningsingenjör på IEI vid Linköpings universitet, utvecklat en fräsmall till en handöverfräs för att tillverka tappar. För att ta fram arbetsmaterial till tester av mallarna har jag för hand kluvit fram och sedan täljt träämnen..

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

Antifouling paint containing the biocide bisTributyltinoxide (TBTO) has been used since1960 to reduce the occurrence of fouling on hulls on boats/ships. January 1st, 2003 theantifouling paints containing TBTO were prohibited. This ban covered all use of paintcontaining the substance TBTO. The ban was introduced because of alarming observationssuch as development of imposex in aquatic non-target organisms. Imposex is the impositionof male sexual characteristics on mainly female marine snails and occurs due to exposure toTributyltin (TBT).