It is important for today?s farmers to minimize the costs for crop establishment, because of decreased prices and support from the EU. Farmers, who plow in autumn on heavy clay soil, often do some kind of tillage in autumn to get better soil structure before spring seeding. This is especially important when growing small seed crop, e.g. sugar beet and oil plants.

AimThe aim of this study has been survey the possibilities for short-term stays in the Stockholm Archipelago for people without their own means of transport, own equipment and/or experience of outdoor life.To fulfil this aim, the following questions were formulated:? What communications are available to chalet parks in the Stockholm Archipelago?? What overnight accommodation is available in the chalet parks in the Stockholm Archipelago?? What activities can be pursued in the Stockholm Archipelago?? What is the financial cost of travelling to and staying in the Stockholm Archipelago for a week?MethodWe chose to use six interviews and three observations in order to gain as much insight as possible. Interviews were conducted with Claes Petterson at Waxholmsbolaget, a company that provides transport services in the Archipelago, and with managers for five chalet parks: Rolf Andersson for Finnhamn, Per Englund for Grinda, Arne Johansson for Rånö, Pär Hjärtström and Peter Hösöyen for Gålö and Anders Bedinger for Gålö and Nåttarö. The interviews were recorded in writing and on tape. Observations were carried out at three chalet parks, i.e.

ESAB is a world leader in production of welding consumables and equipment. The company manufactures, among other things, welding electrodes. A roller straightening unit is used in the cutting process to straighten the wire, which the welding electrode consists of, by adjusting some of the rollers during operation. According to ESAB?s standard and the European machinery directives, moving parts of machinery, such as rollers of the roller straightening unit, must be out of the operator?s reach.

The interest in horses and equestrian sport is constantly increasing, and so is the will in both riders and trainers to learn more about the effect the rider and its equipment have on the horse. The last twenty years, more and more studies have been performed were the horse and its kinematics have been in focus. The access to more advanced technology has made it possible to study areas, which earlier have been hard to reach. The knowledge about kinematics in the horse, and how riders and their equipment interact with the horse?s movement, is also of great interest to veterinarians in equine practice.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

The business potential of software defined radio (SDR) technology is studied by evaluating whether or not its characteristics correspond to those particular to a disruptive technology. The maturity of the SDR technology concept is illuminated by analyzing the opinions and perspectives of a selection of representatives for different stakeholders in the wireless communications market. Characteristics as, for example, the degree of consensus about the utility of SDR technology and the awareness of features and limitations are studied by application of the theory of technological frames. This theory helps us understand how and when technology evolution takes place. Finally we describe the value network structures of some potentially viable application areas for SDR and suggest some possible business opportunities based on SDR technology.This thesis is carried out as a case study and the research data is obtained from secondary sources, such as literature and Internet publications as well as interviews with people well experienced in the field of wireless communications.

This literature research is meant to answer the following questions: ? What was the Swedes consumption of fat from 1935 to 2009? ? How has the fat consumption corresponded to the current recommendations? ? What is LCHF and which are the main advantages and disadvantages? Fat supplies us with energy, isolates and protect organs from bumps and punches. Fat is insoluble in water but soluble in organic solvents. The properties of a fat depend on its structure. The most common fat in human food is triacylglycerides.

Abstract Title: Total Cost of Ownership ? Revealing the true cost of owning and operating equipment. Authors: Anna Bladh Anna Ström Tutors: Michaela Boye, Parts and Service, PTD, Alfa Laval Göran Berg, Parts and Service, PTD, Alfa LavalCharlotta Johnsson, Department of Automatic Control, LTH, Lund UniversityBertil I. Nilsson, Department of Industrial Management and Logistics, LTH, Lund UniversityCarl-Henric Nilsson, Department of Business Administration, Lund University Core issue: ?Which costs should be included in a general Total Cost of Ownership model regarding centrifuges, and what input variables are needed in order to calculate those costs in a user-friendly way and with a maintained level of accuracy?? Purpose: The theoretical purpose of the thesis is to identify the cost items that have the greatest impact on a TCO calculation for a centrifuge.

Logistic Culmination ? One or Two Sides of the Coin?An Observation From a Different Point of View Logistic culmination can be compared to a stretched rubber band. If combat units moves in direction away from the supplies the rubber band will gradually stretch. The rubber band will eventually burst and at that point the logistic culmination will be a fact. But if the rubber band was to be let go before bursting, it will instead be contracted.

This report describes the tactics used by the Swedish Air Force rescue services against crashed military aeroplanes and helicopters. The aim of the report is to study and analyze the tactics used by the different Air Force bases, standards, regulations and equipment. The report also discusses the different work environment problems and hazards around military ARFF. Much of the information gathered for the report comes from interviews with personnel working in and with the military rescue services. The overall conclusion is that the basic conditions for a good ARFF tactic are there, but a lot needs to be improved and optimized..

During the last years, the pharmacy market undergone major changes. Re-regulation that has been done in 2009 meant that monopoly was unlocked for competition. In a market where firms offer equivalent products, increases the importance of delivery service as competitive tool to differentiate themselves among the crowd. This also applies to pharmacy market where the supplies of goods in large way consist of equivalent products regardless of the company.This case study observes the importance of delivery service in terms of competitive tool on pharmacy market by focusing on a company?s improvement in delivery service.

Intresset för sömlösa stålrör med stora ytterdiametrar i förhållande till tunna väggtjocklekar har ökat tillsammans med att högre hållfasthet i olika stålsorter tillkommit. Detta gör det möjligt att tillverka lättare, billigare och mer materialeffektiva stålprodukter med samma eller högre hållfasthet som tidigare.Denna nya utvecklingsriktning medför förändringar och utmaningar i en av företaget Ovakos produktionslinor i Rörverk 5 Hofors, vilket de har behov av att samarbeta med maskinkonstruktionsföretaget BEKAB för att utvärdera och utveckla.I Ovakos produktionslina i Rörverk 5 finns en del av ett asselvalsverk som kallas för "förreducerare". Denna del av asselvalsverket ser Ovako ett stort intresse i att utvärdera och utveckla för att bättre anpassas till den nya utvecklingsriktningen.  En känd utmaning hos förreduceraren sen tidigare är att den från början är framtagen för att reducera ner ett kvalitetsproblem hos rörprodukterna som kallas för trattbildning. Projektet fördjupar sig därför inom trattbildning för att bättre förstå grunden till förreducerarens nuvarande design för att därefter genomföra en redesign av förreduceraren.I en nulägesanalys av nuvarande förreducerare framkommer ett flertal olika produktionsutrustningsproblem med tillhörande kvalitetsproblem hos rörprodukterna. Projektet väljer därmed att fokusera på de produktionsutrustningsproblem som ger störst effekt för förreduceraren om de löstes.

The art of riding is a fugitive art, which signifies that the means available for documentation of performances are insufficient, and that the equipment used by the old masters are important clues for the understanding of their art. The most specialized tool used for riding is the bit, in particular the curb. As museum catalogues become accessible to the public through the internet, riders will look for information about bits. It is then important that the information provided in the catalogues is valid not just for the curator, archaeologist or art historian, but also for the rider.In this paper, I add context to the bits by explaining two opposing philosophies of bitting, and how they affect the design of the bits. This is followed by a brief history of the art of riding and how the bits have evolved since the 16?th century.

Rapporten undersöker Volvo Construction Equipment Components axelmontering för axlar till Dumper och Hjullastare. Arbetet har utförts med intervjuer, studiebesök på andra fabriker och en detaljerad studie av monteringsavdelningen och dess angränsande avdelningar vilka levererar artiklar till monteringsstationerna. Undersökningen har resulterat i ett förslag där fördelarna av en stationsbaserad montering och fördelarna med en linjemontering kombinerats. Arbetet presenteras i rapporten och i en dator animerad 3D simulering av förslaget till en ny monteringslayout. Jag anser att Volvo CE Components och montörerna på monteringsavdelningen skulle gynnas av monteringslayouten som redovisas i rapporten..

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.