This thesis describes teh solution of two problems regarding safety on powered lawnmowers; protectning the users from injury when using the lawnmower in slopes, and when cleaning the cutting blade.The task was carried out through initial studies on a representative lawnmower. A generation of ideas followed with an evaluation to select the best solution. The winning concept was further developed to reach acceptable performance. The word resulted in a functioning prototype utilising an original way of detecting inclinations without incorrect signals. It c an serve as a platform for further development into a product.The work gives insightful experience of solving real-world problems, and especially to deal with situations where several variables and their effects are unknownPlease note that several parts of the work are confidential, and have therefore been removed from the thesis..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The aim with this thesis is to investigate two different methods used to test usability on web-sites to determine the advantages and disadvantages of two methods and compare the results. The two selected methods are the think aloud method and asynchronous remote method. Re-mote usability testing has existed for more than ten years but the possibilities with this meth-od needs to be explored more.To achieve the purpose of this thesis a case study was conducted on an e-commerce site and for the online remote usability testing software was used.The results of this study show that think aloud usability testing encounter more issues with the website than the remote usability testing..

We where asked to write a webapplication, with similar functionalityas an existing desktop application. The application can todayrecord sounds from a person, mix it together at the optimal place withanother, similar sound and play back the result.The application used mathematical calculation that the developerswhere not familiar with, therefore it was decided to focus on the partsthat involved recording and playing sound, to pave the way for anyfuture implementation.The follwing prototypes where implemneted:1. Read a sound clip from a file.2. Splicing of two sound clips at different points in the clips.3. Generate the sound of a guitar.The result of this evaluation is that web browsers today are notready for this type of application, but that there is potetial as soonas W3C have standardised the use of a microphone as a source to theexisting DSP functions..

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Allt större och större andel företag väljer att presentera och förmedla varor och tjänster via e-handel. En viktig aspekt vid e-handel är att kunden känner förtroende för e-handelsapplikationen och företaget. Denna rapport redogör för vilken inverkan multimediala inslag har för förtroendet av en e-handelsapplikation, vid initialt användande. En undersökning har genomförts med hjälp av en kooperativ utvärdering av fyra e-handelsapplikationer vilka innehåller olika typer av multimediala inslag har.Resultatet av undersökningen visar att multimediala inslag inverkar positivt på förtroendet för e-handelsapplikationer. Däremot finns indikationer på att för hög grad av multimedialt inslag inverkar negativt på förtroendet för e-handelsapplikationer..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The aim of this study is to establish whether there are any specific trends in master theses concerning knowledge organization. To identify the past and current trends a method of content analysis has been applied to 110 theses over a time period of ten years. The results of this study show that there is an increasing interest in subjects concerning for example the evaluation of retrieval effectiveness in search engines on the Internet. A subject which was popular in the late 1990:s was information technology and its different applications. This subject has since that time decreased in popularity.

The ability to tackle NP-hard problems has been greatly extended by the introduction of Metaheuristics (see Blum & Roli (2003)) for a summary of most Metaheuristics, general problem-independent optimisation algorithms extending the hill-climbing local search approach to escape local minima. One of these algorithms is Iterated Local Search (ILS) (Lourenco et al., 2002; Stützle, 1999a, p. 25ff), a recent easy to implement but powerful algorithm with results comparable or superior to other state-of-the-art methods for many combinatorial optimisation problems, among them the Traveling Salesman (TSP) and Quadratic Assignment Problem (QAP). ILS iteratively samples local minima by modifying the current local minimum and restartinga local search porcedure on this modified solution. This thesis will show how ILS can be implemented for MSA.

Thousands of people all over the world suffer from injuries that temporary affects their ability to speak or inother ways communicate. A very common procedure for persons that suffer from some kind of breathingproblem in the higher parts of the neck is called tracheotomy. This prevents the patient from speaking whenno air passes the vocal cords. There have been many studies done to understand how these patientsexperience this period. The results are consistent, the patients often feel fear, frustration and worries aboutthe future.Tobii Technology develops a technique called eyetracking wich enables persons to control a computer with theeyes.