This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Undersköterskors arbetsuppgifter inkluderar vård av patienter och hantering av servicesysslor. Hantering av servicesysslor samt förflyttningar på vårdavdelningen upptar en väsentlig del av en undersköterskas arbetstid. Denna studie kartlägger undersköterskors roll på en vårdavdelning på Vrinnevisjukhuset i Norrköping, Sverige. Studien analyserar hur undersköterskor fördelar sin tid mellan olika aktiviteter samt utformningen på hur en framtida utbyggnad på vårdavdelningen kan tänkas utformas. Metoder som användes var tidtagning med stoppur, kostnadsberäkningar, simuleringsmodell samt intervjuer inom relevanta yrkesområden.Studien erhåller en kartläggning över hur nuläget ser ut för undersköterskor på en vårdavdelning.

i samhällsdebatten om våld i parförhållanden ligger fokus på våld mot kvinnor, samtidigt som forskning successivt intresserar sig för män som våldsoffer för sin partner. Den största faktorn som påverkar benägenheten att anmäla brott är brottets allvarlighet. Syftet med studien var att undersöka om det finns köns- och kulturskillnader i benägenhet att anmäla misshandel i parförhållande och huruvida anmälningsbenägenhet påverkas om ett barn bevittnar misshandeln. En fallbeskrivning av misshandel i ett parförhållande lästes av 80 undersökningsdeltagare, hälften från Afrika och hälften från Sverige. De fick sedan ta ställning till huruvida de skulle polisanmäla om de var offret.

Abstract: Private equity used to be synonymous with tremendous yields and rates of return. However, the private equity market trembled in 2008, due to the financial meltdown caused by the worldwide credit crisis. Considering the current low number of exits within the private equity industry, the purpose of this thesis is to examine if there has been any change in how private equity firms control their portfolio companies since the inception of the crisis. One private equity company and two portfolio companies have been studied. The case study is prepared from interviews with senior directors in the portfolio company and investment managers in the private equity firm.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Uppsatsens huvudsyfte är att undersöka hur vuxna överlevare från sexuella övergrepp i barndomen hanterar sia erfareneheter och läker effekterna av traumat. Kvalitativa intervjuer har genomförts med fem informanter. De huvudsakliga slutsatserna av materialanalysen är följande: Relationen till make eller annan partner har större positivt inflyttande på läkningsprocessen än relationen till terapeut eller internetbaserade relationer till andra överlevare. Överlevare kan under läkningsprocessen finna en positiv mening i förmågor de tillägnat sig för att överleva traumat. I läkningsprocessen kan överlevare ändra sina grundantaganden i positiv riktning.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Background:It is estimated that one in ten children witness domestic violence. It is of importance that children grow up in a safe environment. When they grow up with domestic violence they can lose very important skills which can be hard to gain back. Children respond to domestic violence in different ways depending on their age. Aim: The aim of this study was to enlighten children's experiences of domestic violence in their home.

AbstractUndersökningen bygger på en öppen kvalitativ undersökning som fokuserar på hur fem pappor ser på att vara en engagerad och delaktig pappa i dag. Då papporna är engagerade i en förskola som är ett familjekooperativ där deras barn går betyder det att deras intresse för tid och engagemang inte ligger i underkant. Men hur ser papporna på hur det är att vara en delaktig pappa? Och vad anser papporna vad som ingår i konceptet delaktighet? Undersökningen visar på en stor vilja och medvetenhet att inte trampa i sina fäders fotspår även om de har varit av positiv art. Vilket kan benämnas som en varierad eller flexibel maskulinitet/manlighet baserat utifrån att plocka delar av det goda och dåliga som papporna har genom sin livserfarenhet.

The aim of this study has been to highlight the situation for young men within the context of honour. The aim has also been to highlight the restrictions of young men within the context of honour, and how they rebel against those demands. The study was based on a qualitative research method and carried out in Sweden. The results have been analyzed using the hermeneutic perspective. The results showed that the situation for young men within the context of honour is often manifested by controlling their sisters and the expectation that the young men support their families in the future by marring a woman who has been approved by the collective.

I made this examination essay to investigate the possibilities and problems with machinery import. The rules intend to loaders and agriculture machines are still pretty flexible. It is today rather simple to make a registration or inspect those machines. There are still some practical problems to be aware of. It is very important to have the right contacts abroad, it is not always that you have time or moment to inspect the machines before purchase. In that case you have to trust your contact or partner about condition, equipment or working hours of the machine. Another important thing is payment before delivery: There is a huge risk that you do not get the machines that you paid for. If problems come up, you need to know the laws, your rights and your duties. A Swedish company does not pay any value-added taxes when it buys from another member of the European union. On the other hand must the machine be sold included value-added tax, if the buyer is a Swedish company.