Multichannel-shopping has become a wide spread phenomenon in the retail industry due to a significant development of retail channels and formats. Consumers now shop for the same product category in many different retail settings and this trend is increasing. Therefore both the academic world and the retail industry are screaming for knowledge about the multichannel-shoppers. Several studies have focused on the characteristics of different channels and how multichannel strategies should be designed to minimize cannibalization. There is however a lack of research concerning what characterizes multichannel-shoppers and what drives them to shop in several channels.

To be competitive in the corporate climate of today it is important to have effective logistic activities. A common resource within the internal logistics is forklift trucks, which are used to lift and transport material. It becomes more and more important to decide whether to buy, lease or rent the forklifts to obtain an optimal economic situation. Many companies have issues with internal pricing. It is difficult to price products and services correctly. It is common to price the overall instead of what it really costs.The purpose of the thesis is to present a model for the acquisition of forklifts for internal logistic operations, regarding financing and internal pricing, to obtain economic effectiveness and an optimal forklift fleet size. The study focused on a specific research question, and for this purpose interviews with experts were held, observations were made and a literature study was done.

During the migration season in 2013 a study on spawning migrating salmon and the effect of water flow on the behavior was conducted of the salmon at the Forshaga hydropower station in the River Klarälven. The River Klarälven with its nine hydropower plants on the Swedish side, constituting migration obstacles for the migrating salmon. Fortum Generation AB has together with the County Administrative Board restored a salmon trap at the lowermost hydropower station in Forshaga, aiming at making it possible for the salmon to swim into the trap, and thereafter be transported by truck past the power plants and then continue their journey to the spawning grounds on their own. Unfortunately, it is believed that the trap does not work as well as it should. In this study, I focused on salmon position in relation to water flow and if the number of salmon that swam into the fish trap differed between salmon with previous experience of the trap (experienced) and salmon without experience (unexperienced).

System based models of plants rely on descriptions and assigned functions of genes, and currently 50% of the genes in Arabidopsis thaliana has either no assigned function or a function based on homology only. Mitogen activated protein kinases (MAPK's) are key players in cell signalling and are conserved among eukaryotes, though their targets are highly diverse. A recent study has described a small Arabidopsis protein (80), without homology to any described protein, as a phosphorylation target of the MAPK's MPK3/6. Further work established ?-glucan phosphorylase (PHS) as interacting with 80 and described a delayed senescence phenotype for 80 knock-out plants.

Hip dysplasia is a common, inherited malformation of the coxofemoral joint that eventually leads to osteoarthrosis. Several breeds of dogs are affected and the prevalence varies between different breeds. As part of the effort to reduce the prevalence of hip dysplasia and select dogs suitable for breeding, radiological screening is performed by at least 12 months of age. Before the radiological examination the dog has to be chemically restrained, sedated or anesthetized. The sedation protocol used differs between veterinary clinics. The impact of sedation method of the screening result for hip dysplasia has been studied.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The purpose of this study is to analyse how a distribution and sale-network for quality softwood lumber should be designed to fit sawmilling companies? business concepts, and at the same time satisfy customer needs regarding delivery time and quality aspects. This thesis work is a case study based on a sawmilling and retail company in Sweden. AB Karl Hedin is a private owned sawmilling company with 500 employees. The company?s turnover is 1500 million SEK, it includes 4 sawmills, 16 builders merchants stores and a packaging company.

In the late 20th century there has been some changes in the public sector. These changes are described as New Public Management. When ideas from the private market is transferred to the public sector, for example to regard citizens as cus-tomer. Central in this paper is the use of term customer in the Swedish public sec-tor. There are two questions in the paper; which possibilities has a disappointed customer to effect the public sector, and what may happen with democracy, the common good, when the citizen becomes a customer?To answer the questions I study two different cases, Svedala kommun and the tax department, Skatteverket.

Studiens syfte var att undersöka fängelsereformsattityder i Sverige med syfte att utreda om dessa korrelerade med kön, politisk tillhörighet, ålder och urvalsgrupp. Detta utförs genom att replikera en tidigare amerikansk studie inom samma ämne. Resultaten från den svenska studien jämfördes även med den amerikanska. Urvalsgrupperna utgjordes av allmänheten(N=105), före-detta kriminella (N=48) och högskolestudenter vid Högskolan i Skövde (N=252). Respondenterna nåddes via en mailenkät.Resultaten visade att de svenska respondenterna hade mer positiva attityder gentemot fängelsereformer än deras amerikanska motparter.Före-detta kriminella var mer positivt inställda till fängelsereformer än studenter och allmänheten.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

The purpose of this work was to see if it was possible to rebuild an old dairy house into a house fore sheep production. The goals fore the work was to see witch kind of production model was suitable, how the actual drawing would look like and witch kind of interior was needed. The building was built in the beginning of 1900. It is located on the mountain Kinnekulle in Sweden. It was a big production fore its time and hade about 60 dairy cows. It was a lot of hard work because the floor was built by big stone blocks and it was very hard to rebuild when some more automatic solutions came fore handling all the manure. The idea of remaking the building came when we rebuilt the roof fore 5 years ago.

Accounting for financial instruments can either be based on a transactions approach or an eco-nomic approach. Under a transactions approach instruments are reported at cost whereas under an economic approach instruments are reported at fair value. Hence, under a transactions approach realization becomes a criterion for recognizing fair value fluctuations as revenue whereas under an economic approach it does not. A mixed model is defined as a combination of the transactions approach and the economic approach insofar it records some accounting items at cost and other items at fair value. The mixed model gives rise to an issue commonly referred to as an accounting mismatch.

Higher demands of competitiveness and efficiency have led to increasing sizes of farms, with more land, more capital and more comprehensive logistics. The aim is to gain benefits of scale economies that reduce the production cost per unit. However, a greater extent of the business exposes the farm of increased risk where small deviations rapidly can erase the benefits. A modern dairy farm thus put high demands on the farmer?s ability to coordinate, plan and manage the forage production through the whole process until storage to obtain silage of the desired quality and quantity at the right price. The objective of this study was to design a simple model, i.e.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.