Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.

The aim of this thesis is to examine collaborative tagging as a potential asset to libraries by a review of 10 social bookmarking sites and their features, and a discussion of these features? possible use when the environment changes from the web to a library. Previous research on collaborative tagging is presented, as well as overviews of social bookmarking, folksonomies and the concept of Web 2.0 and Library 2.0. The study itself is presented as a walkthrough of common features and how they work, followed by a schematic overview of which sites have which features. Finally each site is presented in a more detailed manner.

Just how far is it possible to make learning of new parts for recognition and robot picking autonomous? This thesis initially gives the prerequisites for the steps in learning and calibration that are to be automated. Among these tasks are to select a suitable part model from numerous candidates with the help of a new part segmenter, as well as computing the spatial extent of this part, facilitating robotic collision handling. Other tasks are to analyze the part model in order to highlight correct and suitable edge segments for increasing pattern matching certainty, and to choose appropriate acceptance levels for pattern matching. Furthermore, tasks deal with simplifying camera calibration by analyzing the calibration pattern, as well as compensating for differences in perspective at great depth variations, by calculating the centre of perspective of the image.

I have chosen in this work to examine which factors are affecting the artificially creation of a tree cavity containing decomposed wood. The purpose of the work is to find out which factors are affecting the most when a tree cavity is created, and to apply these results when you artificially try to create a tree cavity. The need to create tree cavities comes from the situation where many tree cavity living beetles finds themselves today. When existing trees are to pass out there will be no suitable inheritors yet. The work was initially to focus on cavities created from cut branches.

Nanofiltration is a proper way of preparation of drinking water. The process has a lot in common with reverse osmosis where a semipermeable membrane is used to separate a pure water flow from the remaining water. A pilot plant was used to ensure that nanofiltration is a suitable technology for a specific waterworks station in Glemmingebro, Ystad. The purpose was also to find out if a pH-adjustment is needed for feed water in a possible full scale plant.  In this case nanofiltration is used mainly to remove sulphate and calcium since the raw water contains concentrations of these substances which exceed the limits for potable water. It is important to receive a high recovery (RC), otherwise the deliviery of water won?t be high enough.

70 % of the lakes and waters in the water district of northern Baltic Sea do not reach the requirements for good ecological status. This is mostly due to eutrophication caused by a too high deliverance of nutrients from agricultural land or effluents. Losses of particulate phosphorus through water erosion contribute to a great extent to this eutrophication. In the action plan for the water district cover crops are mentioned as a measure for reducing losses of phosphorus from arable land. This paper reviews the possible effect of cover crops in the water district and discusses what crop that would be most suitable.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

The aim of this thesis is to investigate the opportunities of classification of web pages. Two classification systems are compared; a library classification system traditional and a system that is developed for use on the web new. UDC is chosen to represent the traditional systems, and Yahoo! represents a so called new system. UDC is used by NISS Directory of networked resources, which is a directory that uses the system for organisation of electronic resources. Both systems are analysed from two different perspectives, a multidisciplinary and a timeperspective.

AimThe purpose of this study is to compare the level of activity between playing wii Sports Tennis and wii Sports boxing, and the usual sports, and to see how the two variants are perceived.Issues:- How much strain ratio and energy consumption it gives to exercise wii sports compared with the playing of sport for real?- How do the test participants experience the different tests?- How are the two wii sports games against each other in terms of activity and fitness in the school environment?MethodThis is an experimental study in which 10 test participants (5 men and 5 women) have carried out four different physical tests. The tests consisted of either playing an exergame or playing a sport for 25 minutes. Physical activity was measured during the test using a heart rate monitor. All test participants completed all tests in the same order.

This is a diploma thesis executed as a part of the examination of the educationalprogram Building engineer ? Construction management at Halmstad University. The aim of the thesis is to compare and evaluate conventional open-cut pipe-laying withhorizontal directional drilling. The thesis includes a comparison of the economic,environmental and time-based aspects of both methods and discusses which factorsthat determine the optimal choice of method.The study is mainly based on previous studies regarding the subject and oninterviews with professionals from the industry.A fictional project with five realistic cases of pipe-laying scenarios was compiled,sent to different companies for calculation, evaluated and compared. Our conclusionregarding when it?s suitable to use which method is entirely dependent on thespecific project.

The freshwater pearl mussel (Margaritifera margaritifera) is threatened throughout its range. There has been a substantial decline of the species and one major reason is habitat degradation. We investigated how the substrate composition of the bottom floor affects the regeneration of the mussel by analyzing data from the Västerbotten County Board?s inventory of the freshwater pearl mussel. The results implied that fine material such as fine sediment and sand might be detrimental to regeneration whereas gravel and boulders and in particular stone seem to be beneficial.

The assignment given to us by NCC was to compose a degree project based on ground excavations for power cables. The aim of the study was to examine suitable excavation methods depending on different possible terrain conditions. The amount of previously written material within this subject is nearly non- existent and therefore there is a genuine interest by the NCC to receive a compilation of different production methods. The greater part of this study is based upon interviews with several companies active within this area of expertise. The technique of placing the electricity grid beneath ground for safety is today getting more and more common.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.