AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

ABSTRACTThis project thesis has been written at the request of Mälardalens University, Västerås.The aeronautical engineering students at Mälardalens University and the pupils of Hässlö upper secondary school, all gets the opportunity to perform a computation lab with a real turbojet engine during their study. The goal of the lab from the University is that it should give the students applied experience from the theory part of which has been tought in the course ?Aircraft Engine Technology?.                      The pupils of the Hässlö upper secondary school are performing simpler calculations from the measured values of the equipment. This turbojet engine is located at Hässlö airport in the premises of Hässlö upper seconday school.Since the installation 1989, the engine has lost both thrust and reliability. This makes the theoretical computations made by the students inaccurate.

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.

The purpose with this report is to illuminate the construction solutions and the deformations that could exist in medieval parish stone churches. But also to increase the writers understanding how activity forces effect the construction of the churches. With help from literature and a practical study, containing three churches the writers have collected the material that the conclusions and discussions are built upon in this report. The construction of the churches consists of three parts, the wall, the roof and the vault. The construction solutions are similar in the churches disregard of the roof, where the roof trusses are different.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

The weather has been extremely rainy the last summers in Sweden. Because of the rain, a lot of harvested straw has been lost since it was too wet to store. When the pig producers couldn?t get enough straw to use as bedding, an alternative was requested. Silage is a realistic alternative to straw but since silage often contains clover, it may not be suitable to use in pig production since clover is rich in phytoestrogens.

The purpose of this master thesis is to examine a proposal for basic class 4 in UDC, which has been empty since 1964, and to pick out a negotiable subject for that proposal. The proposal is analysed from a theoretical perspective based on principles created by S. R. Ranganathan. Three principles are used.

During spring 2007, I Matilda Lindblom, undertook my Bachelor Degree project in Furniture Design. The supervisors were Agneta Stake at Nola in Stockholm and Leo Jóhannsson, teacher and examiner at Carl Malmsten CTD in Stockholm.The project was based on three elements:? Cooperate together with a producer for professional supervision? Learn to work from a given design brief.? To learn more about industrial production? Learn more about furniture for public areasI contacted a furniture producer called Nola AB, in Stockholm, who became my work partner during this project. The asked me to design a piece of furniture where you can sit and work with a laptop on. The target was for public areas, for example in parks, malls, or at airports.In cooperation with Nola, my ambition was to develop this piece of furniture that was the answers on their wishes and demands.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

To identify and evaluate apple cultivars is not an easy task, since the taste and appearances of the fruit are affected by where the apple tree grows. At the Balsgård new apple gene bank there is a unique and interesting collection of over 260 different cultivars from all over the world. To find out if these cultivars are consistent with previously published descriptions, the fruit was evaluated for some of the cultivars. Among the evaluated cultivars some were selected that could be suitable for cultivation and/or fruit breeding. A few cultivars were in addition analyzed at a consumer evaluation at the Kivik apple market where visitors could vote for the most beautiful apple and the best taste.

The aim with this thesis is to make a comparison between forcing tulips in a hydroponic system and the forcing off tulips that have been planted in soil. The results are mostly based on interviews with six Dutch and one Swedish tulip forcer and the managing director at the Horticultural Research Centre, Proeftuin Zwaagdijke, in the Netherlands. There are benefits and disadvantages with both methods. Tulip bulbs planted in soil seem to get a brighter colour after forcing, compared with those forced ?in water?.

In this paper I have conducted an analysis to critically examine survey questionnaire forms used in political research to measure trust and distrust. During the first step of the analysis I aimed to identify how the concepts where used in the forms. The second step involved examining if it was possible to relate the questions and items to five theoretical assumptions based on theories of trust (and distrust). The third step was to examine the quality of the forms, in relation to survey and questionnaire designs.The results of the analysis showed that the institutes that conduct the studies tended to use similar questions to measure trust. Some of the forms that where analyzed had very many questions, which could lead to exhaustion for those participating in studies.

This literature review examines different forages which are well suited for suckle cow production in Sweden today. They should also be possible to cultivate in Sweden under the current circumstances. Crops suitable for grazing in Swedish climate but not used in Sweden today, but which may be relevant for Swedish conditions are also mentioned. In Sweden today, mainly grass silage, straw and hay are used as forage, but also wholecrop silage is used to some extent. However, concentrates are not used to a greater extent, since it contains too much energy.

The aim of the study is to examine a book used as level-based teaching material, Denmagiska kulan (Wänblad, 2011), to analyse the progression within and between thedifferent levels, A, B and C, intended for use in grade 1. The material is designed so thatpupils at different levels in their reading development can share the same literature.Another aim is to study the connection between illustrations and text. This literaturestudy is based on both a qualitative and a quantitative method of analysis. Thequalitative method applies a readability analysis with the focus on the graphic form andthe language of the text. The quantitative method measures the LIX (readability index)of the texts.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.