This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

Military dogs in Sweden spend their first 18 months after weaning with a foster owner that has volunteered to care for its upbringing. The foster owner is advised by a consultant and offered three opportunities to train the dog together with other foster owners. There is a positive correlation between the number of attended training opportunities with the consultant, or other professional dog trainers, and the results of the dog in the temperament test at the end of the 18 months. The test results are in turn positively correlated with the likelihood of the dog to enter service. This thesis aims to investigate why the number of training opportunities is important for the dog?s chance to enter service by identifying foster owner factors that influence the success of the dog and which temperament test items the factors have the strongest impact on.

The thesis hears content-error in relation to agreements closed by electronic means. The purpose of the thesis is to elucidate how the rules in 32 §(1) AvtL apply to agreements closed by such means and to evaluate its Suitability. The elucidation is done on the basis of, the rules? adequacy in relation to their objectives in collaboration with a comparative view on a selection of international legal framework under private law, such as DCFR, UNCITRAL Model Law, UNIDROIT Principles and CISG.Since Sweden lack a specific regulation for electronically closed agreements, all modern closing methods will be evaluated from the dated outlook of the Swedish Contract Act. In relation to entirely automated processes which results in the closing of an agreement, particular difficulty arise in correlation with prerequisites, which requires a human stance.

Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.

Sudan has always showed great potential in the poultry industry, but it has not been until now that this potential has blossomed and is growing quickly. As large agribusinesses1are taking over the market shares within the urban areas, smallholders2 have been put out of business. They are not able to compete with mass production and lack financial assets to improve their production techniques. Contract farming is defined as initiatives from agro industrial companies to secure access to smallholder produce and has in developing countries become a way of allowing the poor to participate in a larger market (Farrington, 1999). The aim with this study was to investigate the Suitability of implementing the contract farming concept within the poultry industry in Sudan today. The study is a qualitative field study and the authors have conducted qualitative interviews with respondents involved in the poultry industry in Sudan.

The present study concerns a concept development of a product idea that Bengt Magnuson, associate professor, had when a heavy storm caused a widespread power failure of long duration. With a basic power-producing unit one should be able to get through a power loss. The product could also be useful for other tasks if different modules are connected, e g grass mower or snow-blower.According to the product idea the basic unit will be able to produce electric power enough for a fridge, freezer, TV, and a few electric lamps. Normally the basic unit can be used e g as a mower, when such a module is attached. An increased number of tasks would make the contraption useful and tempting for those who do not own an electrical power set in reserve.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

Road design with focus to safety has been extensively developed in last decades in Nordic and some other EU countries with the main aim to achieve a decrease in a number of accidents and fatalities on the roads. These countries gained many valuable experiences, but they had to sacrifice great effort, expenses, and time to reach the present art-of-state. The purpose of the Master?s Thesis is to review some design approaches with focus to safety and discuss the general way that they may be applied. The Master?s Thesis studies safety in three levels: (i) general - design standards, national safety policies and road hierarchy; (ii) local authority and road administrator; and (iii) three specific safety countermeasures - junctions, pedestrian crossings and traffic calming.

The purpose of this study is to analyze and evaluate the Suitability of the three instruments SERVQUAL, SERVPERF and Zone of tolerance to measure service quality, from the respondents' perspective. This study has been carried out by a quantitative method in which respondents answered three questionnaires, which was based on the three instruments. The SERVQUAL instrument is a revised version based on criticism by Carman (1990). It is based on the five dimensions; reliability, responsiveness, assurance, empathy and tangibility, with 22 items in which each dimension is associated with a number of items. SERVPERF is the instrument most similar to SERVQUAL and is also composed of the same five dimensions.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

Sewage sludge contains plant nutrients and has earlier been utilised as fertilizer to cropland. Unfortunately not only plant nutrients but also heavy metals, pathogens and organic contaminants tend to accumulate in sludge. The Suitability to use sewage sludge in agriculture has therefore been subject to several discussions over the years. The Swedish food industry does no longer accept sludge as fertiliser for Swedish producers. In 1999 the Swedish parliament accepted several objectives for environmental protection. In order to prevent environmental pollution and further exploitation of the earth crust, one of these objectives confirm that phosphorous from sewage shall be recirculated to arable land.

Profit in first commercial thinnings of today is hard to achieve. This is because of prevailing pulpwood prices and because of high costs of logging and transport. To reduce these costs higher productivity is advocated. One way to increase the productivity is the use of multi-tree handling harvester heads. The aim of this study was to calculate logging and transport costs in first thinnings, where multi-tree handling has been used.

This is an essay concerning the density of the city. An increasing amount of today?s cities have a shortage of space available for the erection of new buildings and settlements, especially in areas close to the city-centre. New buildings and settlements are therefore often found in the outskirts of the city, resulting in long distances between work and living for many people. These long distances are a waste of limited resources and are inconsistent with the vision of the sustainable city.The challenge for the future is to insert new buildings and settlements in the existing city-structure and in this way reduce the distances between different city-functions.The density of the city can be increased in two different ways; by inserting new buildings between existing ones or by extension existing buildings, for example by an additional floor.

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

This study, which was conducted in Sweden, was based on four qualitative semi-structured interviews. The aim of this study was to create an understanding of how a municipality designs the sanction for youth offenders called ?youth service? based on the law that establishes the existence of such a sentence. We interviewed social workers that work at the department of youth service in the municipality of Gothenburg, who exclusively deal with youth offenders? sentenced to youth service as their job assignment.