AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

In this paper the rate of convergence, speed of execution and symplectic properties of the time-integrators Leap-Frog (LF2), fourth order Runge-Kutta(RK4) and Crank-Nicholson (CN2) have been studied. This was done by solving the one-dimensional model for a particle in a box (Dirichlet-conditions). The results show that RK4 is the fastest in achieving higher tolerances, while CN2 is the fastest in achieving lower tolerances. Fourth order corrections of LF (LF4)and CN (CN4) were also studied, though these showed no improvements overLF2 and CN2. All methods were shown to exhibit symplectic behavior..

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

This is a report of a prestudy commissioned by a medium-sized Swedish company before an imminent major change in IT systems. The change aims to provide a simplified IT administration within the company through a cloud-based approach.The preliminary study provides an interpretation of the concept of cloud computing. It also covers a review of different models to use in order to achieve an internal cloud. Suggestions on how to proceed with the change process are also provided, and which models might be appropriate for the specific company..

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

This bachelor thesis in science Informatics contains the qualifications for the applying of IT in education for students in elementary school, grade 1-3. By empirical case study on an existing elementary school, whose success on IT use is noticed, describes how to apply IT in the classroom in an adequate way. We look at different theoretical frameworks in interaction and design of systems designed for learning purposes, and satisfies their specific needs and situations within the classroom's four walls. The current lack of statistical measurements on students' results and effects of the use of IT in teaching, prevents further improvements. If we simultaneously work to develop more well-designed systems that are designed for this purpose, it is possible that the effects become more and better.

This essay has discussed and analyzed a draft for an idea about a network called EduSync. This idea is based on that teachers and students, attending and holding courses, all over the world should be able to find and interact with each other. EduSync is founded from a new learning theory, connectivism. Interviews, participation in a conference and two workshops have been used to gather information and different points of view concerning e-learning, for example possibilities and problems with this idea of a network.  A comparison of web communities and e-learning environments that exists today was also done. The gathered information from persons as well as literature resulted in a discussion concerning learning and what would or would not be possible with the creation of EduSync.

Aim: Preferential treatment and allocation of quotes according to sex are two current concepts due to the increasing demand for equality. One organization that may use preferential treatment is the fire department. This is why we chose it as a starting point for our study. The aim with this essay is to investigate how Gästrike Räddningstjänst can create a more equal organization.Method: We have interviewed eight employees and prepared questions for each one. This represents a qualitative method.

Sweden is a country that has made some progress in developing energy efficient solutions. The problem in Sweden is that many houses and apartment buildings are old and have inefficient ventilation- and heating systems. This energy is lost when systems are inefficient, which then results in huge economic costs. Luckily, more and more people are becoming aware of this, which means that Sweden is on track to become even better within energy efficiency.Energy use for the housing- and service sector amounts to 166 TWh of total use at 616 TWh. Without distribution and conversion losses, these figures show that the housing- and service sector accounts for almost 40 % of the country's total energy consumption.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

This thesis describes how the chip space and coolant channels are designed in today?s mills, the ideas behind the design and what is considered to be the best method of cooling. It contains ideas on how the chip space can be simplified. It contains several concepts on how the cooling could be designed for better efficiency and manufacturability. There are also suggestions on how the cooling could be stopped when the cutter isn?t cutting.

Sahlgrenska Academy at University of GothenburgDepartment of Internal Medicine and Clinical NutritionABSTRACTTitle: The connection between IBS and FODMAPsAuthor: Helena Hautamäki and Rebecka BertilssonSupervisor: Sofia KlingbergExaminer: Frode SlindeProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 2013-04-10Background: IBS (Irritable Bowel Syndrome) is a functional gastrointestinal disorder, and is acommon disorder in the western population. The predominant symptoms are diarrhoea,abdominal pain, bloating, constipation, and excessive flatus. Today there are no evidence basedrecommendations concerning dietary factors for patients diagnosed with IBS, but recently certainfactors in the diet that seems to trigger the symptoms have been identified. These factors areshort-chain carbohydrates, Fermentable Oligosaccharides, Disaccharides, Monosaccharides, andPolyols (FODMAPS), which are not completely absorbed in the lumen.Objective: The purpose of this systematic review article is to examine whether there are anyevidence that a diet low in FODMAPs may induce improvement of symptoms in patientsdiagnosed with IBS.Search strategy: The literature search was performed in the databases PubMed, Scopus,Summon and Google Scholar. The keywords were ?Irritable bowel syndrome + FODMAPs?,?Irritable bowel syndrome + diet? and ?FODMAP and diet?.Selection criteria: The inclusion criteria were patients diagnosed with IBS between the ages 18and 69.

This thesis is performed in cooperation with Prodelox AB and JTI (Swedish Institute of Agricultural and Environmental Engineering). The purpose of the project is to generate and develop a WC-technique with a closet sewer that keeps a higher TS-substance than 1.5 %. The WC-technique is mainly directed towards permanent households in sparsely-populated areas and cabins. The goal is to generate concepts of toilets with an extremely low use of water in terms of flushing. The design should be appealing and touch more senses than only the visual.

This project consists of an adaptation, trial and evaluation of a model for practicing. Based on prior research I created a model aiming mainly to raise a musician?s self- awareness around the different parameters a performance consists of. An additional wish was for it to simultaneously assist the musician in monitoring his or her progress. With video recording and self-evaluation as the two main parts I tried the model by using it over a period of three months.