
Sökresultat:
8909 Uppsatser om Suggestion system - Sida 47 av 594
Förbättrat råvaruutnyttjande vid kvalitets-sortering av timmer : utvärdering av analysprogrammet Stockholmen för automatiserad timmersortering i dimensions- och kvalitetsklasser hos BARO WOOD AB
The aim of this thesis was to analyse BARO WOOD AB:s timber measuring and quality sorting and to evaluate the analyse program Stockholmen. The purpose was to get a better understanding for the quality sorting made at BARO WOOD AB today, analyse differences in center board quality from logs with a good quality and logs with a bad quality, suggest new sorting criterias developed from analyses made with Stockholmen and to evaluate the program Stockholmen. All analyses are based on data gathered in a test sawing made at BARO WOOD AB in June and July 2002. The test sawing was made on four different diameter classes and every diameter class consisted out of A or M-grade logs, with a better quality, and B-grade logs with a lesser quality. The logs where sorted out with BARO WOOD AB:s existing quality criterias.
Kontextberoende generering av träd för dataspel
Rapporten undersöker om kontextberoende generering av träd är lämpligt att använda i dataspel. I arbetet presenteras ett system som möjliggör procedurell generering av träd som omgivningen kan påverka. De faktorer som inverkar på trädets grenstruktur är solljus, vind och gravitation. Projektet bidrar med en lösning till att minska utvecklingstiderna för dataspel genom att möjliggöra att trädmodeller algoritmiskt genereras i datorn istället för att de modelleras av en artist..
Analys av mellanspänningsnätet i centrala delar av Västerås stad
The dependency of continuous electricity supply is high in the Swedish society today, at the same time no one is willing to pay for a too costly or over dimensioned power distribution system. The owners of the distribution systems are the ones responsible for this balance act of maintaining a high quality of electricity delivery to customers at a reasonable cost.In this master thesis a limited part of the primary distribution system (10 kV), owned by Mälarenergi Elnät AB and located in the city centre of Västerås, was chosen for a deeper analysis of its reliability. Its ability to handle outages of system components (N-1 and N-2 contingency analysis) was investigated to find out potential weak spots and parts of the grid that showed signs of being overdimensioned.The results of the performed simulations showed that in 74 % of the studied N-1 contingencies cases, consisting of outages of a bus bar in a distribution substation, the system could handle this without causing outages in other parts of the grid. For the N-2 contingencies 61 % passed the test. It was also found that one of the two included high voltage substations could alone supply the investigated part of the grid.
Axle Link - en kortslutningsskyddad säker DC-överföring
Denna examensrapport redogör för hur man kan få en kortslutningsskyddadoch säker inkoppling av en DC-länk mellan två skiljda elektriska system.Rapporten bygger på hur en lastbil ska kunna få en större säkerhet för attbibehålla sina elektriska bromsar om tex ett av bromssystemen tappar sinordinarie matning.Lastbilens bromssystem består idag av två skiljda elektriska system med ett 24volts strömförsörjande batteri vardera. Det ingår två stycken elektriskabromsar i varje system. Om det tex blir fel på en av bromsarna och dennapåverkar ett av systemen vill man kunna koppla bort denna enskilda bromsmed sitt system. Man vill även kunna försörja den fungerande bromsen somsitter i samma system via en så kallad Axle Link. Denna strömmatningslänksitter mellan två hjulpar på samma axel.I denna studie undersöktes möjligheten att realisera en kortslutningsskyddadoch säker DC-överföring via en Axle Link, i första hand med diskretakomponenter.
Digitalisera loggboken : En analys av utmaningarna med att utveckla IT-stöd för kunskapsintensiva verksamheter
Failed system development projects are a common sight within the IT-industry. During the last ten years we have seen several more or less disastrous high profile projects being reported in the news. One aspect that might hold some of the responsibility for these failures is the fact that more organisations are knowledge intensive which makes their work processes difficult to capture in computer systems. How requirements engineering is handled becomes even more important in these cases, where processes are unpredictable and rely on individual judgement and knowledge. In this study we have examined the challenges of developing systems for knowledge intensive businesses through a method of qualitative case study of a university laboratory.
Bremsningens effekter hos häst : utvärderat med hjälp av termografi, hormonanalyser och hematologi
Twitching is frequently used in horse management because of its sedating and pain-relieving effects. In this study, the effects on the horse?s nervous system by twitching were investigated by thermography of the skin temperature. The temperature is regulated by the sympathetic nervous system through postganglionic sfincters at the capillaries of the skin. The effects on the endocrine activity have also been studied by the measuring of ACTH and cortisol in blood plasma.
Dimensionering och konstruktion av Villa X
AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.
CSCW-system ? Framtidens patientinteraktion
Tester på människor, så kallade kliniska studier, är en viktig del i utvecklingen av nyaläkemedel och samtidigt en stor kostnad för läkemedelsföretag. Framförallt när patienternafinns på många olika platser blir processen både dyr och tidskrävande. Real time InteractionPatient Evaluation (RIPE) är ett koncept och en prototyp till ett Computer SupportedCooperative Work (CSCW) system, utvecklat av Elof Dimenäs och Mats Sundgren(AstraZeneca) i samarbete med IT-universitetet. Systemet ska stödja interaktion med patienteri effektstudier och att övervaka medicineringen och dess effekter. Tanken med RIPE är attman ska kunna göra effektstudier med symtomskattning med hjälp av mobiltelefoner ellerInternet.
Sammankoppling av fjärrvärmenäten i Nyköping och Oxelösund : miljö- och systemkonsekvenser
District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.
"Skyll inte på friheten" : en analys av den liberala miljödiskursen i Sverige
The paper is a discourse analysis of the liberal environmental discourse in Sweden today. It is based on articles in two of the main liberal Swedish newspapers, Dagens Nyheter and Sydsvenska Dagbladet, and a liberal periodical, Neo.The purpose of this study is to analyze how the environmental problems that have been produced by the industrialised society, especially global warming, are seen upon in the liberal discourse in Sweden today. The theoretical point of departure is a discourse analysis that as a method seeks to analyze the material to reveal what assumptions the discussion departs from, and what assumptions the discussions reject.The thesis concludes that the main trends in the discussions are to position the environment against the financial system and state that the capitalist system is the only system that can solve the environmental issues. The existing environmental problems are not denied, but constantly belittled and only considered to be a problem if it poses a direct threat to humans. The solution for these environmental problems is believed to be the strengthening of the financial system and the development of new technologies..
A-måttet - En slitageanalys på spårvägsrälsen i Göteborg
AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.
Lägenhetsskiljande massivträbjälklag Projektering av bjälklag med förbättrade ljudisolerande egenskaper
AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.
Förbättrad Kravhantering med hjälp av Lösningsinriktad Pedagogik
Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements.
Aktiv bullerdämpning i ventilationssystem
Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.
Ett tydligare System C2 : Användargränssnittsutveckling med stöd av användarcentrerade metoder
User friendly and usable are two words that are often mentioned in the context of marketing new products. By doing so it adds an extra sense of quality to the product. The meaning of these words is therefore something that every product wants. But what is it that makes a product usable and user friendly? What methodology exists formaking sure that a product is usable? Does it exist applicable processes to ensure user centered development? These questions together with a practical example are parts of what will be addressed in this report.The thesis was carried out for C2 Management, a company that works with supporting other companies in their work with quality and constant improvements.