AbstractThe purpose of this paper is to analyze TPL companies, and their collaboration with their customers from a TPL perspective. The paper intends to get a bigger understanding of their collaboration, advantages/disadvantages and how the collaboration can be improved. The foundation for the paper is obtained through questions that have been created from the chosen theories about supply chain, third part logistic (TPL) and lean production. We have had open interviews with five different conveyers where we have had our questions prepared and during the interviews asked new questions to get more distinct answers. When we subsequently analyzed the empirical material and by chosen theories we have been able to confirm that the collaboration between the TPL companies and their customers is more of a partnership character.

Incident response plans are faced with new challenges as organisations expands to the cloud, this thesis aims to highlight these challenges and their potential solutions. Our work has focused on managing the incident response in contrast to earlier work that has been focusing on preventing them.As with any development, security is seldom prioritized. Instead the focus are often aimed towards usability and functionality, which means incident response plans are written, implemented, forgotten and finally becomes obsolete. This could result in an organization losing their ability to produce acceptable forensic images, avoid severe downtime, or prevent similar incidents in the future, which are all important parts of incident response.Traditional incident response plans does not address incidents in the cloud. Thus, an absence of guidelines for managing incidents in the cloud becomes apparent.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

In the beginning of the nineties there was a change in how the voluntary sector was perceived, and the significance of their work became reevaluated and more acknowledged. As a result, this sector gained a new and higher interest. The changes and downsizing in the welfare state with economic crises, due to political cutback, made the politicians look fore new solutions. One solution is to encourage cooperation between the public sector and the voluntary sector in order to handle the different needs of individuals.Uppsala community and the voluntary sector are working closely together within a project called ?God Livsmiljö?.

HAFA Bathroom Group has given us the assignment to develop a standardized back panel for their bathroom cabinets. This cabinet is going to be applied to most of their current and future cabinet solutions. To this point, they have constructed unique suspensions-and back panels for most of their cabinet models. They have also been forced to pull wiring and assemble the cabinets differently because of factors like; position of the wall sockets, dimensions of the cabinets and their shapes.The company wants to distance themselves from their current solution, firstly because the cost of having manpower to design each individual suspension solution, secondly because they will save a lot of money when the manufacturing process requires a minimum of components to be constructed. As a result of this, the company can use their resources better to develop future products.The main idea is that the consumer isn?t required to change the suspension or back panel when they decide to buy a new cabinet.

This thesis aims to contribute to improved functional procurement of photovoltaic systems, PV systems. Functional procurement means that criteria concerning a function are set rather than specifying technical details or products. Possible advantages and difficulties in using functional procurement have been analyzed by interviews, simulations and a case study. Electricity production and surplus production for different scenarios have been simulated via MATLAB. The MATLAB script was also used to generate rules of thumb on feasible solar fraction for six different load profiles; a church, a farm, a car mechanic, an office, an industry and an apartment building.

 This bachelor?s thesis purpose is to examine how library staff experiences the meeting with non-Swedish speaking users of public libraries, and how they solve different situations. Today there is not much research on this subject but we find these questions important to study because we think it is good to be aware of the situations that can arise and discuss how to solve any problems. To have a basis for this qualitative study we conducted group interviews with library staff, where they are asked about their experiences with non-Swedish speaking users. In the analysis the results of the interviews are compared to previous research and related to communication theory, which is the theoretical framework for this study.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

In this bachelor thesis a complete prototype of an industrial vibration measurement platform has been developed. By measuring a number of variables such as acceleration, temperature and speed conclusions can be drawn on machinery health. The aim is to evaluate hardware and software solutions for a possible future product. Based on a requirement specification a proper hardware design has be developed. The hardware consists of a four-layer PCB with an ARM Cortex-M3 microcontroller and about 250 other components. The PCB was designed, assembled, tested and finally housed in a box.

The main object of this diploma work thesis is about how computer programs can bea tool to use for work on stormwater investigations. The advantage of using acomputer program compared with calculations made by hand is evaluated anddiscussed. The computer programs that have been used for studies and a sequence oftesting of the possibilities are Autodesks Storm and Sanitary Analysis and DHIs MikeUrban.Focus on sustainable development now permeates the building industry. As a resultstormwater investigations have been conducted in an increasing extent the recentyears. Stormwater is water produced due to precipitation, such as rain and snowmelt.Stormwater investigations normally contain descriptions of existing land use, plannedland use and suggestions of measures and technical solutions for the future disposal ofstormwater.The initial part of the thesis consisted of literature studies on stormwater andstormwater investigations to understand the science.

Prioritisation of software requirements is a critical part of the development of software. Whichrequirements and in which order they will be developed is one of the main tasks that requirementprioritisation supports.There are different ways that a requirement prioritisation can be used, for example alone or in agroup and with different methods.The purpose of this report is to map out how you can carry out a requirement prioritisation alonewith different types of prioritisation methods and how you solve the problems that can arise whenprioritisting requirements. This is done by documenting the use of three different types of methodsthat can be execute alone. The methods are "100-dollar test", "Ranking" and "Top-tenrequirements".To be able to prioritise requirements, you need to establish which requirements you shall prioritise.The paper retrieves this information by interviewing stakeholders in the system and analysing theresult of the interviews and the execution of the requirement prioritisation.Three problems arose during that work and I present solutions on these problems. The problemswere 1) equivalent requirements when using the "100-dollar test", 2) low differentiation gradebetween the prioritised requirements in the "100-dollar test" and 3) that the requirements that wereprioritised weren't classified before the prioritisation, which leads to inaccuracies in the resultingprioritisation.The solution to the problems that the paper presents is to increase the amount of distributable unitsin the "100-dollar test" to 1000 per requirement, suggestions of classes of the requirements andthe combination of the methods "100-dollar test" and "ranking" to bypass the equivalentrequirements.The report is written in Swedish.Nyckelord: GoTRIS, requirements retrieval, requirements analysis, Viktoria Swedish ICT,requirements prioritisation, requirements, 100-dollar test, ranking, top 10 requirements..

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

This examination work is about implementation of Cisco Systems Network Admission Control (NAC) within a leading IT-company in region of Jönköping. NAC is a technique that is used for securing the internal network from the inside. NAC can verify that the client who connects to the network has the latest antivirus updates and latest operative system hotfixes. Clients who don?t meet the criteria can be placed in quarantine VLAN where they only have access to the update servers.

This thesis describes how the development of a mechanical enclosure to an alarmsystem proceeded. The project was made on behalf of Inferno Light Indusec AB.The goal set to this housing would offer a home alarm in which Indusec?s uniquesound system would give the customer a new alternative on the market. They wantedto, among other things, create an aesthetically but at the same time affordable alarm.The aesthetic theme is something that is missing in today?s market.