The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

When establishing a groundwater protection area it is of great interest to be able to estimate the transit time of the groundwater from different places of the aquifer to the withdrawal well. These estimates can be uncertain due to heterogeneities in the aquifer. As a part of the work to develop methods for a more certain delineation of protection areas, a tracer test was performed in an esker located 25 kilometres NW of the town Uppsala.The purpose of this master thesis was to perform, describe and evaluate the tracer test. Travel times from the tracer test should then enable comparison against stochastic simulated travel times of the groundwater in the area.Three dyes (rhodamine WT, uranine and naphtionate) and a salt (NaBr) were used in the tracer test. The tracers were injected in four different wells located 25 meters from a pumping well.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.

Syftet med denna studie är att undersöka hur poliser inom den ingripande verksamheten hanterar de emotioner som uppstår i arbetet. Vidare avser studien även att undersöka vilken påverkan de emotionella aspekterna av arbetet får för poliserna.  Detta görs med hjälp av en kvalitativ metod i form av sex semistrukturerade intervjuer med poliser inom ett polisdistrikt. Studiens teoretiska ramverk består av begrepp inom emotionssociologin och socialpsykologin.Följande frågeställningar behandlas:Hur hanterar poliserna de känslor som uppstår i arbetet och hur kan detta karaktäriseras?Hur påverkar de emotionella aspekterna av arbetet poliserna, har det konsekvenser? Sammantaget visar resultatet att poliserna följer informella känsloregler som finns inom yrkesrollen och att dessa regler skiljer sig beroende på den situation poliserna befinner sig i. De hanterar även känslor i arbetet på ett sätt som kan beskrivas med Hochschilds begrepp surface acting och deep acting.

Examensarbete utfördes på CA-Verken i Sävsjö som bl.a. tillverkar hydraulcylindrar. De senaste två år har CA-Verken haft en kraftig ökning av omsättningen och det som står i vägen för fortsatt expansion är produktionen som har begränsad kapacitet.Målet med detta arbete är att studera CA-Verkens produktionsflöde för att kunna identifiera flaskhalsen/flaskhalsarna och därefter ge förslag på lösningar och förbättringar. Den teorin som har använts som grund till arbetet är Theory of Constraints (TOC). Intervjuer, företagets affärssystem och observationer har använts vid datainsamling.

The investigation was initiated because of the high workload of the sellers and, additionally, because the Tunadal sawmill has received low ratings in customer surveys. Thus,  two main approaches are adopted here,  the first being to investigate which of the three methods  of working, namely, market divided flow organization, function organizationand flow organization with collaboration, proves to be the most beneficial. The second is to investigate whether there is an available method to ease the daily work. A literature review has been made in order to determine more efficient ways for the sellers to work in the Tunadal sawmill. During the investigation, an in-depth investigation into the total quality management using a balanced scorecard as a management tool was conducted.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Dagens konsumentbeteende online skiljer sig åt från hur det såg ut för bara några år sedan, någotsom kan förklaras av att både e-handel och Internet ständigt utvecklas och vårt köpbeteende ochvåra preferenser tenderar att förändras över tid. Den tekniska utvecklingen gör attkonsumentbeteendet inom e-handel tenderar att växla snabbt vilket gör kontinuerlig analys avkonsumentbeteende till en nyckelfaktor för att lyckas inom e-handel.Studien syftar till att undersöka det något yngre kvinnliga segmentets, i åldern 25-34 år,konsumentbeteende inom e-handel idag. Flow är ett använt begrepp för analys avkonsumentbeteende och har visat sig påverka både attityder och avsikter avsevärt inom virtuellamiljöer som exempelvis e-handel. Flera definitioner på begreppet tyder på en viss komplexitetoch att tillståndet tenderar att förändras och växa i takt med utvecklingen. I studienkonceptualiseras flow i kategorierna koncentration, njutning och förvrängd tidsuppfattning, där viundersöker hur de påverkar webbsajters användarvänlighet och konsumentens upplevdabeteendekontroll, och vi fokuserar på konsumentbeteende online i form av impulsköp och avbrutna köp då vi önskar analysera om beteendena påverkas av ett flow-tillstånd Via en enkätundersökning med kvinnliga studenter från svenska universitet visar våra resultat attflow i form av njutning och förvrängd tidsuppfattning ökar impulsköp, medankoncentrationsnivån inte har någon påverkan på konsumentens impulsivitet.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.