To the sewer systems households, industries and other activities are connected. The wastewater is collected at treatment plants where a nutritious sludge is produced. The sludge does not only contain nutrients, but also hazardous substances originating from different activities in society. To reduce the flow of hazardous substances to treatment plants and to create a sustainable recycling of plant nutrients the Swedish Water & Wastewater Association has developed the certificate system REVAQ. This certificate requires a good quality of the sludge but also that the treatment plants maps the origin of the unwanted substances.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

During the last two hundred years many wetlands and streams in Sweden have been lowered to provide land for agriculture and forestry. Some of the coastal wetlands and streams probably served as spawning sites for certain species of fish in the Baltic Sea, but the present situation is not well known. As standardized methods to monitor fish in running waters are carried out during late summer or autumn, there is a need for methods to sample spring-spawning fish in these streams.The aim of this study was to survey the lower kilometer stretch of Hammerstaån in Stockholm, to investigate the extent to which the stream is used by spring-spawning fish. Furthermore, the study aims to evaluate a new type of survey fishing gill net called strömöversiktsnät (SÖN). This was done by comparing the catch of fish by SÖN with that of fyke nets.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

Det övergripande syftet med detta arbete var att skapa en övergripande sammanställning rörande ämnena flödesproblem och silodesign och specifikt ta fram riktlinjer för hur massflöde ska uppnås i silos för hantering av olika biobränslen. Dessutom syftade arbetet till att ta upp två autentiska exempel med flödesproblem och hur dessa kunde designas om för massflöde. För att ta fram riktlinjer har arbetet utgått från värden framtagna av Wu, Schott & Lojdewijks (2011). Dessa har sedan bearbetats i programvaran Silo Stress Tool skapad av Dietmar Schulze (2013) för att utvinna gränsvärden för massflöde beroende av egenskaperna internfriktion, väggfriktion och vinkel på silons ficka. Resultatet visar gränsvärden för massflöde för både cirkulära och rektangulära silos.

Small pieces of plastic, termed ?micro plastic? in the oceans derive mainly from degradation of big plastics such as beach littering, but also from sources of direct emission from e.g. beauty scrubbers and synthetic sand-blasting. These micro plastics are ingested by marine animals ? mistaking them for plankton ? or via prey.

During the last two hundred years many wetlands and streams in Sweden have been lowered to provide land for agriculture and forestry. Some of the coastal wetlands and streams probably served as spawning sites for certain species of fish in the Baltic Sea, but the present situation is not well known. As standardized methods to monitor fish in running waters are carried out during late summer or autumn, there is a need for methods to sample spring-spawning fish in these streams.The aim of this study was to survey the lower kilometer stretch of Hammerstaån in Stockholm, to investigate the extent to which the stream is used by spring-spawning fish. Furthermore, the study aims to evaluate a new type of survey fishing gill net calledströmöversiktsnät (SÖN). This was done by comparing the catch of fish by SÖN with that of fyke nets.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.