Date                   May 28, 2009Level                  Bachelor thesis in Business Administration/Information TechnologyAuthors             Jennie Andersson, Niklas Fridell, Visar HoxhaTutor                  Marie MörndalDepartment    HSTTitle                    ERP-solutions in small to medium sized enterprises ? possibilities and problemsSummary          ERP-solutions have penetrated the market for SME: s, offering the same advantages larger enterprises have enjoyed for years. For a significantly cheaper price, SME: s can nowadays acquire ERP-solutions and become more effective and increase their profit.  The authors have examined five SME: s in both the production and service company segment and have come to the conclusion that an ERP-solution would indeed benefit these companies in many levels but also induce certain obstacles the examined companies must overcome, both financial and organizational.Purpose            The purpose of this thesis is to examine if and how SME: s can become more efficient and developed and increase their profit by implementing an ERP-solution. Further, the purpose is to discuss which conditions that exists for the examined SME: s in order to implement an ERP-solution.Method            The thesis consists of a qualitative research where the authors have interviewed either the owner or employees at management level by using semi-structured interviews.

To produce fine fibre wool as a complement to lamb meat production, Merino and Svea sheep are currently being crossbred in the county of Jämtland. The aim of this study was to evaluate growth and wool quality of the first crossbred lambs. In addition, a literature study about nutritional effects on wool production has been carried out. The literature study showed that fine fibre wool should foremost be achieved through directed breeding. Nutritional requirements of the sheep at different stages of production should determine their feeding.

The world?s growing need for energy together with a desire to ward off the worst consequences of global climate change has resulted in a never seen desire to invest resources in renewable energy sources. Biogas production through anaerobic digestion is one of those growing energy sources. In Sweden there are over two hundred plants that uses this biological process to break down organic substances while producing carbon dioxide and the energy-rich gas methane.This master?s thesis has focused on development of the mixture of different organic substances that is treated at a specific plant, namely Mosserud biogas plant.

This thesis examines the ongoing European political debate on the links between livestock production and climate change. In the end of 2006 the UN Food and Agriculture Organization (FAO) released their report Livestock?s long shadow, showing that livestock production represents some 18 % of the total global greenhouse gas emissions. The purpose of this paper is to explore the European Commission?s position and response to this question since the release of the report.Using Arne Naess? argumentation analysis, statements made by the Commission will be systematically organized and broken apart.

Bakgrund Storstockholms brandförsvar (SSBF) har sedan bildandet 2009 arbetat mot en mer kostnadseffektiv organisation. Detta är ett relativt nytt sätt att tänka inom räddningstjänsten. Denna typ av organisationer har traditionellt sett opererat utan kostnadsfokus. För att beskriva räddningstjänsten organisatoriskt har vi använt oss av teoribildningen kring high reliability organizations (HROs), organisationer som alltid sätter säkerheten först. Arbetet mot en kostnadseffektivare organisation beskriver vi i termer av new public management (NPM) och lean production (Lean).

The purpose of this study is to examine the change in consumer behaviour regarding the intention towards buying fruit when the layout of the fruit section has been altered. We want to increase the probability of making impulse purchases by altering the layout. In our study we have combined structured quantitative observations with structured quantitative as well as qualitative interviews, with secondary data in the form of sales data from two selected ICA-stores. We chose to use this triangulated approach in order to cross-examine our findings and overcome the limitations of one method by the use of another. Further, the Latin square design was used for the observations as a means to acknowledge the calendar effect during the experiment.

The economic situation in the Swedish agricultural industry is currently experiencing a development towards larger units. This progress occurs simultaneously as farmers in cooperation more frequently make investments to decrease risk exposure and to improve the financial result. The purpose with this thesis is to study which advantages and problems a group of farmers experience after a common investment in a small-scale seed production. The aim with this investment is to increase the level of vertical integration in their respective agricultural firms and the results will be analyzed from an economic point of view. At present, the farmers are all seed producers with considerable cultivation areas.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

Using the Introductory Carbon Balance Model, ICBM, five different crop rotations with rye 1. Rye-Ley-Ley-Rye-Beans-Rye 2. Rye-Rye-Rapeseed-Rapeseed 3. Rye-Ley-Ley-Rye-Potatoes-Rye 4. Rye-Rye-Potatoes-Wheat 5. Rye-Rye-Potatoes-Beans-Wheat-Rye-Potatoes-Rapeseed were tested theoretically in four different cultivation scenarios ? Straw left on the field, biogas digestate added as fertilizer. Labelled ?+straw+BD?. ? Straw left on the field, only synthetic fertilizer. Labelled ?+straw-BD?. ? Straw harvested, biogas digestate added as fertilizer.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

The Swedish forest policies have earlier mainly been focused on two goals: production and environment. The production goal aims to benefit the economical gains from forestry while the environmental goal primarily aims to shield the ecological values of the forest. With the introduction of the Swedish environmental code and the environmental objectives it was made clear that the overall objective for Swedish community development, including the forestry sector, is sustainable development. Sustainable development includes supporting economic, ecologic as well as social values of which the latter seems to have been forgotten in the forestry sector. This was recently brought to attention to the sector and the debate how to handle the social values is now ongoing.The legislator has not been unaware of the social values since they have since long been at least somewhat included in the preliminary works.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

The following is an examination of work and gender and how they interlocked in a Swedishbrewery between 1923 and 1939. Leaning on labor process theory and Marxist feminist theory,this paper examines what constituted women?s work in the brewery industry in this era, how women?s work changed with rationalization and economic recess, and how the all-femaleunion locale reacted to these changes. The events portrayed are related to earlier research ongender on the labor process, to the history of the Swedish labor movement in large, and to theevolution of the so-called ?Swedish model? with its relatively low level of conflicts on thelabor market.