Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

The connection between management control systems for controlling sustainability and a firm's motivation for engaging in sustainability is not completely understood (Arjaliès & Mundy, 2013). The aim of this thesis is to develop a more profound understanding for management control in achieving sustainable companies. To do this, we raise the question: How and to what extent do companies use management control systems to achieve sustainability compliance Simons's Levers of Control (1995) are applied to this question in order to get a consistent and thorough insight of management control systems. Hence, a case study of ABB:s work to achieve material compliance in accordance with EU-regulation was conducted. The findings of the case study reveal that ABB uses the regulations as explicit goals and implement them in sustainability procedures.

The purpose of this master thesis is to, with the strategies of the organization and the preferences of the co-workers in mind, explore how reward systems can be designed in heterogeneous organizations. This is done by interviewing store managers and sales personnel in a heterogeneous organization. The frame of reference deals with theoretical approaches on reward systems and is divided in the following sections, individual or group based, differentiated or not differentiated rewards systems and goals, measurements and rewards. These sections are highlighted from the following aspects, equity, implementation possibilities and finally environment. The theoretical discussion ends in the conclusion that heterogeneous organizations should have several different reward systems, but not if a restructuring process is in progress or the system becomes too costly.

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

Man's life has changed in many ways since technology made it?s entry for public at large. In response to this change the science of human-machine interaction was invented. It has in turn evolved into human-computer interaction. With this science the focus is on the customization of the system for the actual person who will use it.The thesis has been implemented in a telecom company's development department.

The situation on the Swedish labour market is different in opportunities whether you are a native Swede or someone who has a foreign background. People with foreign backgrounds tend to have lower wages, higher rate of unemployment and often have temporary employment contracts. There is a conception that the Swedish culture is the standard and other foreign cultures are abnormal and different. The purpose of this study has been to investigate why there is discrimination on the labour market against ethnic minorities and how the Swedish history has contributed to the structural ethnic discrimination that we are struggling with. I have been using the right dogmatic method and a social science perspective as complement in order to answer the purpose.

Swedish healthcare systems have endured harsh criticism from healthcare professionals because of their inability to understand healthcare processes. These systems have been identified as significant time consumers, and Swedish healthcare is therefore facing a major challenge to assure patient safety. The following paper is based on a workplace study, which aims to examine healthcare systems? impact on physicians? practices. Our findings show that physicians spend substantial amounts of time chasing information, rather than managing information and pursuing healthcare.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

To support, enhance and, in the future, develop the activity within the county councils in Sweden, IT support systems are currently used to a large extent. The need to document is central to the health care organizations and the counties have come a long way in the introduction of electronic patient record systems (EPR). The aim of the EPR systems is to support the care processes and the clinical professions in their work.This is a master thesis in the area of human-computer interaction (HCI), Department of Information Technology at Uppsala University. The aim of the thesis was to describe and compare the five most common EPR systems in Sweden. The comparison will focus on some usability aspects and on how well they support the users in their clinical practice.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The Work has been performed to, and in cooperation with Vetlanda Energi och teknik AB.District heating for commercial purpose started in the USA in 1877. Today the network has grown into big and complex systems, which demand maintenance and service to keep up the security of the delivery. When a district heating network expand, it becomes difficult to perform reliable calculations. For this purposes there are a few suppliers who design and deliver systems for documentation and calculation of district heating networks.Vetlanda Energi och Teknik AB is in the position where they must get a system for documentation and calculation for district heating, and therefore they need a basis to get a system. The target is to write a requirement specification that will follow the basis.The Swedish market has been inventoried, and suitable systems have been selected.

The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

The out-of-town retail establishments are part of the dramatic structural changes in the retailing of food and groceries. There are however strong indications suggesting these establishments result in negative externalities concerning areas such as pollution and urban environment. The purpose of this study is to describe and, from an economic perspective, analyse the Swedish political regulations and planning policies concerning the out-of-town supermarkets. The analysis establishes that the current regulations regarding out-of-town retailing do not, due to the occurrence of market failures, produce an optimal situation. It might therefore be necessary to change the planning policies in a more restrictive direction.