Sökresultat:
650 Uppsatser om Structural engineers - Sida 11 av 44
Intellectual capital in Handelsbanken and SEB - an explorative study of the two banks with emphazis on Handelsbanken
Uppsatsen handlar om hur det intellektuella kapitalet i de två bankerna Handelsbanken och SEB skiljer sig åt. Vi försöker också se hur skillnader i resultat och utveckling för Handelsbanken går att förklara med hjälp av det intellektuella kapitalet. Uppsatsen är av utforskande karaktär med tyngdpunkt på Handelsbanken men med SEB som jämförande faktor..
Socialt stöd för personer med intellektuell funktionsnedsättning
Introduction: The health for individuals with intellectual disabilities is asubject that is prioritized by the Swedish Institute for Public Health. Socialsupport has been proven to be important for health and quality of life. Despitethis fact there is no research available regarding the influence social support hason health and quality of life for people with intellectual disabilities in Sweden.Aim: To describe social support and the consequence of social support forhealth and quality of life for individuals with intellectual disabilities. Method:A litterature review of research in a defined area with a descriptive design.Systematic searches for articles were done in several databases and ultimately16 articles were chosen. Themes and categories were created with respect to theaim of this study during the analysis of the articles.
Mjukvaruverktyg för loggning och analys avindustriella processer
This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server.
Kvarnkretssimulering för test av styrsystem
This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.
Xlight-Retro : En lampa för offentliga inomhusmiljöer
The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.
Tvåspråkighetsutveckling: Albansk-/svensktalande ungdomar berättar om sin utveckling av tvåspråkighet utanför skolan
We consider the meaning of leisure time for the human linguistic and cultural development of great meaning, in particular association with bilingual. We are both bilingual and have had the privilege to use and develop our knowledge likewise our experience during our education.The purpose with our school essay is to investigate what the youth tell us about their bilingual development outside School time. Our target group is Albanian-/Swedish speakers from upper secondary youth. Based on our own experience we know that upper secondary School contributes to an increasing awareness about themself and their own language and identity.In our empirical study, have we used qualitative strategy and build our interview guide on the basis of the semi structural method. Furthermore we have carried out two different group interviews which consisted each between 6-7 interviewees.
Hur står det till med jämställdheten? : En kvalitativ studie om arbetet med jämställdhet på grundskolor i Kronobergs län
This study is an assignment from the council of Södra Småland county to investigate how equality between boys and girls progresses at compulsory schools in Kronoberg county. The study was undertaken to find suggestions on how work with equality could best be stimulated.The key question was to elaborate how a decentralized rule and structural context of an organisation can affect an implementation of political decisions. The methodological approach adopted can be defined as inductive, it was analysed how the respondents from some selected schools in Kronoberg county themselves relate to the concept of equality between men and women and their experience and understanding of how the concept of equality between sex is understood in their work at school.School-legislation today demands that active measures are undertaken to promote equality between boys and girls and in general almost all the respondents of my study describe equality as an utterly important question. My findings although, at the same time, indicate a gap between rhetoric and practice. The findings of my study suggest that structural relations and a decentralised organisation can constitute a hindrance for implementing equality between men and women in schools.
Kartläggning av reparationsprocessen på Westermo Teleindustri AB : Identifiering av slöserier och förslag till förbättringar
This report is the result of a thesis performed at Westermo Industrial Ltd with its headquarters in Stora Sundby and it sums up the author's studies for University Engineering in Innovation, Production and Logistics at Mälardalen University.The main goal of the thesis was to identify problems and suggest actions that lead to the reduction of the repair time from 3 weeks to 2 weeks. The key questions that were answered in order to achieve the thesis objectives are: What are the biggest challenges that make the repair process time last for 3 weeks? What are the necessary means and measures in order to reduce the repair length to 2 weeks? The author adjusted the work to the Swedish repairs, repair issues that arise from sell unit Westermo Data Communications AB with its office in Västerås and performed the status report by mapping the repair process, through using observations, interviews and bibliography research studies. A flow map of four sub-processes (Inbound Delivery, BackOffice, Repair Department, and Logistics) was made and each section was observed, where also the employees were interviewed. Data that has been collected was analysed by the author and the decision to execute a workshop that affects Repair Department and Logistics was made.
Glöm inte bort berättelsen : -en studie om intern storytelling
Authors: Marie Andersson, Maria Gustafsson and Johanna Olsson.Tutor: Peter CaesarTitle: Don?t forget the story ? a study about internal StorytellingKeywords: Internal Storytelling, Internal marketing, Communication, Organizational culture, Internal branding, Fellowship, Motivation, Participation.Background: Something that can be problematic for managers in an organization is to find an effective way to spread information that will received by all the employees. One way to spread information and messages to the employees is by using internal Storytelling. The use of internal Storytelling aims to create an environment to build up an engaged personnel. Organizations use internal Storytelling when they want to create collective stories and frame of references among the employees within the organization, and also spread the values of the brand and information about the organization.Problem statement: How can internal marketing be affected by internal Storytelling?Method: Our study is based on a case-study of SCA Packaging Sweden AB.
Skönlitteraturens genrer: En analys av två universella klassifikationssystem
The main aim in this Master thesis is to analyse how an ideological view may have influenced the shape of hierarchies with a specific concentration on the concept of fiction genre in the latest versions of the systems SAB and DDC. Our thesis is that no theoretical classification scheme can be recognized as objective. With an ideological/institutional perspective we look at the structures behind these systems. As a vehicle we use the hermeneutic circle to show the play between part and unit by focusing and analysing three different levels: the content level the concept level the ideological level. The first level is in the shape of a historical background and an analysis of concept with focus on content.
Intuition : En studie av beslutsfattande i mindre svenska företag
Background: Previous studies have shown that intuition occurs in decision making in small enterprises. However, these studies have not illuminated which decision attributes leads to intuitive decision making.Purpose:The purpose with this study is to contribute with an increased understanding of which decision attributes leads managers in small enterprises to use intuition in decision making and why these decisions attributes have an impact on the role of intuition. The follow-ing research question will be answered in our study: Which decision attributes leads to intui-tive decision making in small enterprises, and why?Method: To answer the research question we have conducted semi structural interviews with managers in small enterprises to achieve a deeper understanding of the role of intuition. We have also used a method called Visual Card Sorting as a complement to the semi structural interviews.Result/conclusion: The result of our study indicates that the relevance and the uncertainty of a decision have the greatest significance in the use of intuition in decision making in small enterprises.
3D-modell av torkcyklon - Examensarbete på Metso Panelboard AB i Sundsvall
This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in
Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007.
Metso Panelboard is one of the leading suppliers of complete lines, single machines,
engineering knowledge and after-market services to the fibreboard industries.
The task involved building a 3D-model of a dryer cyclone in the CAD-program
Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of
manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By
creating a 3D-model of it, which should have the functionality to be generated to different
sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of
the work.
This report includes the fundamental theories behind the manufacturing of fibreboards with
focus on the dryer cyclone.
Trygghet i stadens offentliga rum : diskurser, makt och möjligheter till förändring
Women experience, in a vaster extent than men, unsafety in urbanpublic spaces. This is a structural phenomenon, based on unequalpower relations. The theoretical starting-point for my thesis is that howwe choose to express ourselves shape the ways we can think about andunderstand society. In my thesis I study depictions of safety in six ofMalmö city?s action plans and guidelines towards increased safety.
Mitt i prick : Optimerad internkommunikation
As competing organizations struggle to become more effective, one field stands out as one of the vital keys to success; internal communication. Even small errors in information handling can end up into obstacles that seem impossible to overcome. Managers constantly need to adjust the internal communication to fit variables that mirror the structure of the organization. This thesis is a study about how and in what magnitude structure affects organization?s internal communication.We have done qualitative interviews with McDonald?s and Diesel, two different global organizations within the branch of service business.
Ingenjörpluton : Kung på en sak eller klåpare på tusen?
This essay is about the engineer platoon. The engineer platoon has many different tasks and from my own experience sometimes too many. The platoon is able to build bridges, clear mines and to perform all kinds of construction work in rural or in urban terrain.In this case study I compare goals/demands for the battalion to goal?s set up for the company and finally what effects this has on the engineer platoons abilities. The main question is, if the engineer platoon really can solve all tasks given to them in the document TOEM? Abilities such as effect, protection and movement are the bearing parts of the case study.The materials I have analyzed are mostly from documents published by The Swedish Armed Forces.