This essay talks about how teachers in schools are working with a particular focus on students with autistic syndrome. The aim is to investigate the methods used for these students, who develop their learning and achieve the goals of the school. The methods that were used in this study were two interviews in two different schools in central Sweden where teachers and professionals were interviewed. One part of the study was to compare both schools to see which methods they used and when they used them. My interest for autistic students started during my practice in a school.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

To live in a relationship demands hard work with good communications, mutual respect, compromises, empathy and an understanding of your partners feelings and needs. For a person with ADHD all of this can cause difficulties and create a strained relationship, but it can also mean a relationship with thrills, adventure, spontaneity and passion. This study is built on a qualitative method using triangulation, where the studies empirical materials consist of 4 interviews along with observations online. The empirical material is applied on the theories: love, conflict and coping. The purpose of this paper is to increase the understanding of how it is to live in a relationship with a partner who has been diagnosed with ADHD. The questions at issue are: How does everyday life work with a partner who has ADHD? What different aspects (positive and negative) are there to live in a relationship with a partner that has ADHD? How is the possible if any help and support perceived in their relationship and everyday life? The results showed that a relationship with a partner that has ADHD looks like any other relationship, but that it can differ due to the possible difficulties that are at hand.

With abroad education of arts, textiles and nowthe upholstery there were nota long step to become interested inthe visual withinthe upholstery trade. I have chosen to highlight the shapethe world with boththe artist and thecraftsman's eye. I have explored hownew expressions canbe created from traditional methods and materialsfrom upholstery andrelated crafts suchas tailoring for Royal andsaddler. These craftsmake up a webof technologies, materials,and to some extent tool returns and borrowed.By looking at afew items fromthese crafts haveI let myself beinspired and made ??use of knowledgehow to buildforms and eventransfer them tonew areas inan aesthetic andartistic direction.

Bakgrund: Inom forskningen studeras styrkeförhållandet i lårets muskler och anges ofta som flexor/extensor kvot (F/E-kvot). Ett sätt att mäta denna kvot är att använda isokinetiska styrketest.  Forskningen är inte överens om ett optimalt styrkeförhållande i denna muskulatur eller om för stor styrkeskillnad kan ge upphov till skada. Om en optimal kvot kan fastställas är det intressant i ett förebyggande och rehabiliterande syfte.  Syfte: Att beskriva och jämföra F/E-kvoten hos en grupp manliga fotbollsspelare med en grupp fysiskt aktiva män mellan 16 och 25 år. Metod: Mätning av maximal isokinetisk styrka i knäledens flexor och extensormuskler genomfördes med Genesis Single. Resultat: Studien fann en F/E-kvot hos fotbollsspelarna på 78,2 % på höger ben och 77 % på vänster ben.

Studiens syfte är att studera musiklärares syn på högstadiets läromedel i musikämnet; läromedlens fördelar och nackdelar samt vad som anses vara ett ?idealt? läromedel. Studiens teoretiska utgångspunkter utgörs av ett didaktiskt perspektiv. Resultatet baseras på en enkätundersökning av 27 musiklärare från hela landet med olika bakgrunder och yrkeserfarenheter. Studiens resultat visar att de tillfrågade musiklärarna anser att de färdiga eller tryckta läromedel de känner till är otillräckliga och blir snabbt föråldrade.

Graphic profiles are a part of companies? brand expressions. The graphical values reflect the brand values the business wants to convey. They consist of different graphic elements such as logo, company sign, colour schemes, templates, rules, fonts, pictograms, formats and references to how different graphic elements should look, for example, business cards, signs and materials for websites. This thesis aims to examine why firms choose to replace their graphic profiles by studying their underlying motivations.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The demands on the adult literacy-rate are very high in Sweden. People with reading and writing difficulties may find it hard to fit into the community and to succeed in school. To accommodate the needs of students with learning disabilities, Swedish schools provide easy-to-understand materials. The purpose of my thesis is to examine how easy-to-read textbooks for high school students are different from regular textbooks. The study was carried out using a content analysis and I examined the books according to criteria specified by the Swedish author Torbjörn Lundgren.

This study focuses on the motives that recruiters can or may have within companies, organizations and authorities of using Facebook as a complement in the investigation of potential work-candidates. The study also explores the consequences that could occur regarding the boundaries of private and public spheres when recruiters are researching Facebook-pages of potential work-candidates.The results were collected by qualitative interviews with eight different recruiters from a wide range of businesses in Kalmar.By applying a framework of already identified uses and gratifications, we discovered six different motives of why recuriters would use Facebook as a complement while recruiting work-candidates. The motives are; security, guidance and advice, convenience utility, surveillance, curiosity and economic motives. We also discovered that the following consequences of researching Facebook-pages of potential workcandidates are that candidates are restricted in the possibilities of acting private on their Facebook-pages and that candidates have zero control of their published materials since recruiters sets the limits of what can be thought of as private and as public..

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Som arkitekt, byggherre och brukare i en och samma person ges unika möjligheter att styra hela processen från första skiss till färdig byggnad och därigenom förverkliga ett högst personligt bud på vad ett samtida hus kan vara.Mitt examensarbete är en betraktelse av den delvis äventyrliga resan att rita och låta uppföra ett enfamiljshus i vilket man sedan flyttar in. Följande begrepp behandlas:Platsen och dess förutsättningar ur historiskt och fysiskt perspektiv.Programskrivandet; med utgångspunkt i vardagslivet nu och i drömmar om en tänkt framtid. Det unika vägt mot det generella mot bakgrund av bristen på tidigare erfarenheter av villaliv. Funktioner samt Inre och yttre rumssamband beskrivs.Gestaltning av byggnaden; dels som en tredimensionell konsekvens av programmet, dels genom konceptuella val, samt ett stort intresse för materials egenfärg och genomarbetade detaljer. En undersökning av gränssnittet mellan tradition och modernism.Upphandling, tid och ekonomi ? en översiktlig redogörelse för hur dessa frågor balanserats.Materialet består av text ritningar och fotografier..

This thesis report describes the development of concepts regarding how weight can be reduced to the analytical instrument Biacore 4000. This thesis has resulted in five different concept proposals, all of which is solutions to reduce the instrument's weight.The thesis started with a pre-study where the instrument's structure and function were studied using both Solid Works, the opportunity to study the instrument in real life were also possible done. During this phase, a weight study was conducted as well, in which the instrument's weight distribution was studied and mapped.Following the initial phase, the work proceeded by developing concrete concepts to reduce the weight of the instrument where focus mainly was on the two cabinets. In addition, another two concepts were revealed, both with a more general approach.At the final phase of the thesis, the concepts were compiled and evaluated among themselves and the initial instrument.The thesis resulted in a study of the instrument's structure and weight distribution, with suggestions on how weight may be reduced for the instrument.The result factors such as materials, and manufacturing were aspects that were taken into consideration.At the final section of the report, suggestions for further work in which different aspects are discussed can be found..

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.