My purpose in this paper is to study teachers' work in reading and writing in primary school and special school. I want to find out if they use the same methods, strategies and materials to help students learn to read and write. I will find out the answer to my purpose by performing two qualitative observation and two qualitative interviews. Lundberg (2010) is the researcher I relate to during my study. Through observation, I see how teachers work with students in the classroom during a lesson in the Swedish language. During the interviews, I received answers to how teachers work with language, the materials, methods and strategies they use. I found out that teachers use specific strategies when they help their students. They use a work material that is tailored to curriculum in Swedish language and it is based on the phonics method. .

In Sweden more than 400 000 private households have not yet sufficient wastewater purification. These effluent is considered as an increasing problem and many onsite purification methods have been studied. In this investigation, the method of reactive bed filters have been tested by column and batch experiments. Five different kinds of filter materials with reactive surfaces have been studied concerning their capacity to absorb ammonium and phosphorus from wastewater. The materials that were examined are Filtra N, wollastonite Filtra P, blast furnace slag and Polonite®.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

With knowledge of how the southern Swedish forests have been affected by storms the past years, this study intended to find out which factors affect the storm firmness of a stand the most. The study was based on data from stands in the, by the storm Gudrun, affected area. The results of the analyses that tested the stand factors that influence the amount of storm damage to the greatest extent showed that the storm sensitivity of Norway spruce stands were largely due to previous management actions. The factors that could be controlled by thinning and had relevance of storm damage standpoint, according to the results were; the dominant height, volume, basal area weighted mean diameter and stand age at last thinning. In this study, these results are not as clear for Scots pine.

When harvesteing ley there is always mechanical losses from the harvest machines. During the last years the roundbalers with knives,cutting the material-are more common, This use increase the mechanical losses of material. MATERIALS AND METHODS The roundbaler which used in this test was a Krone Vario Pack 1500 Multi Cut. This roundbaler has 17 knives. The theoretical length of cut was 64 mm. During the test we stretched a rubber tarp under the balechamber and collected the materials which fell down from the balechamber.

The purpose of this thesis was to find out whether the main class C (religion) in the Swedish classification system Klassifikationssystem för svenska bibliotek is well adapted to classify materials published in or imported to Sweden, and handled by Swedish libraries today. The questions we put to ourselves were:1. How easy to understand, and how useful is the main class C religion today?2. What, in the main class C, is satisfactory?3. What, in the main class C, is inconsistent, anachronistic or incorrect?4. What, in the main class C, is in need of change or renewal?The method that was used was a number of interviews with librarians and cataloguers. We have interviewed eight librarians from six different libraries, of different types, but all with a relatively large collection of religious materials.Though all of our respondents have expressed a feeling that all the major religions deserve equal treatment in the classification system and a similar division of space, after some pondering on the subject, our respondents have agreed that a larger space for Christianity is warranted considering the composition of the current collections and publication. Our respondents have in some cases expressed that there is a lack of instructions as to how the subdivisions of the main class C (religion) is meant to be used.

My purpose in this paper is to study teachers' work in reading and writing in primary school and special school. I want to find out if they use the same methods, strategies and materials to help students learn to read and write. I will find out the answer to my purpose by performing two qualitative observation and two qualitative interviews. Lundberg (2010) is the researcher I relate to during my study. Through observation, I see how teachers work with students in the classroom during a lesson in the Swedish language. During the interviews, I received answers to how teachers work with language, the materials, methods and strategies they use. I found out that teachers use specific strategies when they help their students. They use a work material that is tailored to curriculum in Swedish language and it is based on the phonics method. .

In this project the author made an attempt to, in a short film, visualizean experience of the organic materials that our bodies consist ofand what becomes of it when we die. The intention was to dissect thismatter, break it down to see it in a simpler form and to explore ourrelationship to it, being part of a constant exchange between organicmaterials and having so much power over the environment and otherliving animals. At the very start, the idea was to deal with the relationshipdifferent people have with their bodies. Later in the process, a decisionwas made that the product would be communicating the author?sown experiences of the body materials after studying it and trying torecreate fragments and feelings of them.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.

The purpose of this thesis is to discuss how a Swedish public library approaches their costumers. I will show how a library interacts with their costumers compared to a business, which has a different economic work frame, a building materials supplier. My aim is to pinpoint differences and explore new methods for the library in order to improve their service.The theoretical frame of the thesis is based on Richard Norman's notion the Moment of truth. The moment of truth is the moment when a business has to convince their customer that they offer both the product, proficiency and service that the customer needs. Service encounters at two organizations have been observed and their differences and similarities compared.

This paper deals with the embalming process in ancient Egypt. Samples were collected from six objects from Medelhavsmuseet in Stockholm. The objects were one supposed ladle and five different contents from pottery. Fourier transform infrared spectrometry (FTIR) and gas- chromatography/mass spectrometry was used to characterize the components of the materials. The result was then correlated with previously made analysis of embalming materials to discover similarities.

LIBRIS is a national library search engine offering information about 6 million books, articles, dissertations and other materials held by Swedish university libraries, research libraries and public libraries. In December 2007 a new version of LIBRIS was launched, developed with focus on usability, simplicity and accessibility. This thesis examines how the new LIBRIS is used, what is working well and what could be improved and also what the users think of LIBRIS. The following report is based partly on a study of usability and partly on a series of tests where librarians, scientists, students and developers have executed a number of tasks while thinking aloud. The users also participated in an interview.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

AbstractAbetong in Falkenberg manufactures, among other things, small prefabricated concrete buildings for housing various installations, such as electric transformers.The aim of this dissertation is to reduce the time needed to design such buildings, by way of finding a number of standardized buildings. Standardized in such a manner as to incorporate both the needs of the manufacturer (Abetong) and its customers.To analyze the needs of the parties the work has included a market survey and calculations on the strength of these buildings.One survey was a letter questionnaire to all of Abetong?s customers who have, in the past, ordered these types of building. The aim of the questionnaire was to establish how the customers want these buildings designed.Another survey conducted was an inventory of all of Abetong?s previous projects where these types of building were manufactured.