The main purpose of this study is to investigate the productivity effects of multiple tree handling in thinnings. Other important elements have been to investigate in which extent multi-tree handling is used in stands with different stem volumes and the impact of collecting partially delimbed fuelwood assortments has on harvesting performance. The study is based on data from thinnings in Sydved and contractors' operating activities. Collection and compilation of operating schedules, number of stems and surveyed volumes from several contractors and a large number of executed orders underlying the results. Multiple tree handling is used to a much greater extent at lower average stem volumes. Prediction models for productivity of the multiple-tree handling harvesters in the study differ from the productivity models for single-tree handling. In the model developed in this study productivity is not as dependent of stem volume as reference models.

People have utilised and influenced the boreal forest for many centuries. Prior to the industrial revolution during the 19th century, however, human use primarily only had a low impact on the forest. When the timberfrontier swept over the country, the Swedish forests came to change for ever. The study site for this thesis is situated in the northern part of the county of Västerbotten, Sweden, and has previously been a National forest. Today the area is an ecopark and the land is owned by the forest company Sveaskog.

The information flow is a very important process in an organization. It affects in a decisive manner the effectiveness of a task. It also has a major impact on the quality of the product or service for which the organization delivers to its customers. Lack of information may cause that important aspects are not given the required attention or even forgotten and can in turn lead to criticism from certification officials and lower customer satisfaction. The purpose of this study was to study how the information flow in Norrskog?s field organization is handled and how this affected the quality of the work performed and the feedback given to the contractors, The study is based on qualitative interviews with contractors, production inspectors and forest inspectors on all Norrskogs districts.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

The movement of the allotment gardens reached Sweden in the beginning of the last century. The allotment gardens quickly spread among the big towns from Malmö in the south and to the far north of the country. Today, there are about 42 000 owners of allotment gardens in Sweden. This work will show the differencies and similarities comparing the original ideas of allotment gardens with how they are used today. The specific questions were; what are the reasons to acquire an allotment garden; is it used for raising vegetables and fruit or only for growing flowers; is what is cultivated there also gathered and used or is it cultivated only for the pleasure of gardening; and finally how the owners of the allotment gardens spend their time there ? by cultivating the land or by recreational activities. Literature studies were made as well as an inquiry at one allotment garden area i Lund. The ideas of the original allotment gardens in the beginning of the 20th century were as much based on the need of getting out of the aparment to a healthy environment, as cultivating vegetables for economical reasons.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

Forestry is an important industry in Sweden, with clear-cut as the most commonly used method for harvesting. Here the long-term impact of clear-cut on lake water quality (dissolved organic carbon (DOC), nitrogen, phosphorus and pH) has been investigated, based on 23 lakes sampled during autumn. Data for additional 15 lakes sampled for the Swedish monitoring program were also used. Lakes were classified as 5, 25, 40 and 60 year based on data of the forest age in the catchment, gathered from the Swedish national forest inventory. Clear-cut lakes were classified as 5 years (>20% of the catchment clear-cut during the last 10 years).

Bakgrund      Skogsmaskiner har under många år förstört både fornlämningar och gränsmärken. Idén till databasen/tjänsten uppkom av egna erfarenheter vid en förrättning, där flertalet gränsmärken hade blivit överkörda av skogsmaskiner. Syfte              Examensarbetets syfte är att lyfta fram en ny idé för att minska skadorna på fornlämningar och gränsmärken som skogsmaskiner orsakar, samt hur lägesnoggrannheten påverkar den nya tjänstens ändamål.Metod           Examensarbetet består av en litteraturstudie med syfte att besvara och ge en bakgrund till problemställningen. För att undersöka hur vanligt det är att lantmätare/mätingenjörer stöter på att gränsmärken blivit skadade av skogsmaskiner genomfördes en enkätundersökning. För en djupare inblick av lägesnoggrannheten på utrustningen i skogsmaskiner och vilken kvalitet på koordinaterna som krävs för en mer ändamålsenligt tjänst gjordes en intervjustudie.Slutsats         De uppgifter som finns tillängliga idag ska vara användbara när det gäller fornlämningar, för en ändamålsenlig tjänst som ska fungera ute i skogen där lägesnoggrannheten inte alltid är den bästa.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the harvesting costs, if better estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

The effect of climate change places demands on how we build cities. Cities have to be built denser to meet the objectives of sustainability but as a result of this densification city green areas are at risk of exploitationand disappearing. The question this raises is whether there has to be an opposition between a dense and a green city?Urban trees are playing a very important role in cities. They stand as the major part of the vegetation in citieswhich are otherwise dominated with concrete and stone.

I den ha?r studien implementeras en finita elementmetod fo?r att lo?sa optimala styrpro- blem i programvaran FEniCS. Den finita elementmetod som anva?nds a?r ha?mtad fra?n Karin Krafts doktorsavhandling Adaptive Finite Element Methods for Optimal Control Problems [2].Optimala styrproblem behandlar styrning av dynamiska system. Systemen beskrivs av en tillsta?ndsekvation och ma?let a?r att styra systemet mot ett visst tillsta?nd till en sa? la?g kostnad som mo?jligt.

Stump harvest could be found in the late 1970?s and the early 1980?s. And now when the prices on energy are high it has become an interesting topic again. This work has been conducted within Holmen Skog?s stump harvest testing in Norrköping.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.