This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

Vinderosion på jordbruksmark har länge varit ett välkänt faktum trots att någon utförligare undersökning om dess omfattning och skadeverkan inte tidigare genomförts. Mot bakgrund av detta har därför ett nordeuropeiskt projekt, WEELS (Wind Erosion on European Light Soils), dragits i gång som syftar till kartlägga vinderosionen på sandig jordbruksmark i norra Europa och som man i slutändan hoppas ska kunna resultera i en vinderosionsmodell. Detta har genomförts med SOIL modellen, en matematiskt fysikaliskt baserad modell för simulering av vatten och värmeflöde i en skiktad jordmånsprofil..

Understory vegetation and fungi are regarded as important ecological drivers of processes like productivity and nutrient cycling in boreal forests. Whilst those processes are linked to soil water content, relatively little is known about the sources of soil water for these forest components. During early autumn in boreal forests, temperature falls and large events of rain are frequent which may influence soil water availability. To better understand the autumn plant-soil-fungi water relationships in this ecosystem, I used stable isotopes techniques in this study to examine the water sources for ericaceous shrubs and fungi in a Scots pine forest following a large, early autumn rain event. I hypothesize that ericaceous shrubs of two functional groups (evergreen vs.

This report describes a study aimed at uncovering flaws and finding potential improvements from when the modelling tool EAAT is used in conjunction with the modelling language CySeMoL. The study was performed by developing a framework and applying it on CySeMoL and EAAT in real life context networks.The framework was developed in order to increase the number of flaws uncovered as well as gather potential improvements to both EAAT and CySeMoL. The basis of the framework is a modified version of the Quality in use model from ISO/IEC 25010:2011 standard. Upon the characteristics and sub characteristics of this modified model different values for measuring usability where attached. The purpose of these values is to measure usability from the perspectives of both creating and interpreting models.

The purpose of this essay is to illustrate the debate of water politics and privatisation of water distribution. My method is debate analysis and qualitative idea analysis and for my essay I used three books that try to persuade the reader that his or her idea is the best for this water crisis. My main question is to illustrate the debate concerning water privatisations. I will also look at the arguments for or against privatisations and finally determine how the authors think the state should act towards this subject. The first book I used was Vandana Shivas ?Water Wars? that when published started an international discussion about the water privatisations.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

The European Union is struggling to maintain democracy and tries to increase the participation among the citizens in Europe. The European Citizens? Initiative, ECI, is a platform established by the European Commission to allow citizens to propose new legislation. ?Water and sanitation are a human right! Water is a public good, not a commodity!? is the first ECI that has met the requirements.

The river Bivaröd is one of the river Helgeån tributaries which has the highest and the fastest increase in water colour. The reason behind this increase is unclear but several factors have been suggested to affect this pattern. In this work, I studied the role of land use, iron and precipitation for water colour increase in river Bivaröd for the period 1976 -2011. Data from a field study along with data from SRK for river Helgeån were used for the analyses. The results showed that both water colour and iron concentration increase and that there is a strong correlation between these two variables.

Lerbodaälven is a river in the municipality of Kil which, due to high phosphorus content is not meeting the requirements for good ecological status according to the Water Framework Directive. The purpose of this report is to investigate the causes for the high content of phosphorus that has been measured in Lerbodaälven between 1995-2010. Four questions will be answered in this report. 1. Does the sewage treatment work affect the phosphorus level in Lerbodaälven? The result from the time series analysis shows that the sewage treatment works have a small impact on the phosphorus level in Lerbodaälven.

This diploma work covers an investigation over the heat - and hot water systems of thetenant-owner's association, Bogården. The heat - and hot water needs of Bogården aresatisfied by both district heating as well as three heat pumps. Implemented investigationshows that the heat pumps are not used in a profitable way. Apart from that, the reservepossibilities are small. There is also a risk of the growth of Legionella bacterium in thehot water system.Since the heat pumps are already installed, HSB-Gävleborg (responsible for Bogården)has a wish to investigate possible proposed actions for optimization of existing plant.After completed investigation, a new proposed action is presented.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

AbstractThis research is about pre-school children?s conceptions of the river and the water environment. The aim of this study was to apply a new teaching method based on the outside learning, as well as to test the method and see if it works, i.e. if children get more knowledge this way compared to ordinary methods like teaching in the class-room which involves showing pictures and discussion of them.The main questions in this study were how children get new knowledge through outside learning and how effective this learning method is, i.e. how much they noticed and learned about the river and the water environment as a result of that outside observation.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

The purpose of this report is to investigate the possibilities with drain water heat recovery (DWHR) in residential buildings. Information and relevant theory has been collected and summarized in this report. Calculations have been done for given scenarios to evaluate profits. DWHR heat exchangers use simple technology and have long life-time. The heat exchanger is connected to outgoing drainage pipe and incoming cold-water supply so countercurrent flow is accomplished.