The mining industry, in terms of ore excavation and metal production, is and has been important to the Swedish economy. In connection with the ore excavation process, large amounts of partly sulphidic waste are produced. When the metal sulphides are exposed to air and water they are eventually oxidised, which leads to the formation of acidic water with high concentrations of metal cations and sulphate ions, so called Acid Mine Drainage (AMD). This water may reach the nearest surroundings and cause negative environmental effects. By covering the waste with soil or water, the oxidation process can be minimised. At the Rävlidmyran mine in the county of Västerbotten open pit mining took place between 1951 and 1991.

Antifouling paint containing the biocide bisTributyltinoxide (TBTO) has been used since1960 to reduce the occurrence of fouling on hulls on boats/ships. January 1st, 2003 theantifouling paints containing TBTO were prohibited. This ban covered all use of paintcontaining the substance TBTO. The ban was introduced because of alarming observationssuch as development of imposex in aquatic non-target organisms. Imposex is the impositionof male sexual characteristics on mainly female marine snails and occurs due to exposure toTributyltin (TBT).

In Sweden more than 400 000 private households have not yet sufficient wastewater purification. These effluent is considered as an increasing problem and many onsite purification methods have been studied. In this investigation, the method of reactive bed filters have been tested by column and batch experiments. Five different kinds of filter materials with reactive surfaces have been studied concerning their capacity to absorb ammonium and phosphorus from wastewater. The materials that were examined are Filtra N, wollastonite Filtra P, blast furnace slag and Polonite®.

The purpose of this study is to investigate witch knowledge and thoughts children will have about the term of floating and sinking, and witch possibilities there is to make various knowledge visible in preschool physics through playing with water. The study also concern the differences and similarities between two different groups of age who have participated in the study. The study was carried out by an activity with participant observation and feedback interviews afterwards. The result shows that the possibilities to physics are many in preschool. The children expressed new thoughts and ideas who concern other phenomena in physics during the investigation and discussed similar experiments and material to examine.

In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution. The work proceeded with an extensive search for abrasive flow meters along with obtaining information about flow measurement in general. When the search for abrasive flow meters resulted in nothing all the efforts were concentrated on finding a principle of measurement that could cope with the criteria.

In ambition to produce more and better harvests, artificial fertilizers are used to produce a better growth of crops in the agriculture landscape. This contributes to leakage of nutrients. Our forests also exhibit a leakage of nutrients. Air pollution contributes to more nutrients. High precipitation with high water flows as a consequence seems currently to occur more frequently in the county of Halland.

Legionella can be prevented, the question is how. This report is a degree in construction engineering education at Chalmers University in Gothenburg. A comprehensive written publication for Legionella-safe plumbing installations is not available and therefore requested. The purpose of this report is to present preventative measures against Legionella bacteria growth in tap water and in other systems where Legionella bacteria are a potential problem. Technical solutions are presented including how different systems function and what their advantages and disadvantages are.

In today?s World is climate change an important and hot topic. Climate scenarios for Sweden show a warmer climate, especially during the autumn, winter and spring. The same climate scenarios also show that the precipitation will increase during this part of the year, however, during the summer the opposite is expected to occur. The purpose of this essay is to examine how future climate change will affect Stockholm especially the expected increase in precipitation, which may lead to a rising level of the Lake Mälaren. During 2000/2001 was Stockholm hit by a flood. This flood nearly resulted in major consequences and showed that there were significant risks for the city of Stockholm and increasing precipitation will result in even more water in the drainage systems of Lake Mälaren. The results presented here show that it is important to increase the drainage capacity of Lake Mälaren in order to reduce the risks of flooding in the central parts of Stockholm.

This project is the result of a cooperation between HalmstadUniversity and EABAB. The aim of the project was to create a macro that would help EABAB automate the process of designing steel trusses. When run in Microsoft Excel, the macro imports and processes coordinates from a calculator program. The data is then imported into the Building Information Modelling software Tekla Structures, which creates a 3D structural model of the steel truss.The macro saves much time in the project planning process and also helps minimize the risk of design flaws caused by human error. .

Wetlands are important ecosystems and form habitat for both common and threatened species. In Sweden, as well in many other places on earth, there is a lack of wetlands. There is an expressed will to adjust this lack through restoration of wetlands with reduced function and through construction of new wetlands. Follow-ups and evaluations are important steps to optimize these actions. The wetland Vattenparken was constructed 1999 ? 2000 for treatment of surface water.

Every year, pesticides are found in surface and ground waters in Sweden. Fungicides are in common usage and applied in high amounts against potato late blight. The present thesis examined the possible removal of four fungicides (metalaxyl, cyprodinil, propamocarb and mandipropamid) from water using the microalgae Chlorella vulgaris. Microorganisms are capable of decomposing a range of organic pollutants and the main focus in previously published studies has been on bacteria and fungi. Microalgae are mostly studied due to their high capacity in biosorbing heavy metals.

The depth-to-water-index (DTW-index) is derived from digital elevation models (DEM) to map soil wetness, in terms of distance from soil surface to the ground water table. The aim of this GIS based study was to investigate the existence of a relationship between DTW-index and forest site productivity (SP). The belief of such an assumed relationship was based on knowledge that the ground water level is related to site properties that can either promote or impede tree growth. Data primarily comprised rasters of the Krycklan catchment in northern Sweden and depicted DTW-index and a laser scanned vegetation height. The 100th height percentile of each pixel in the vegetation raster was assumed to mirror the top-height, letting it act as a relative measure of SP within a delineated area of equal stand age.

After the mandatory rules for clearing was removed in 1994, the clearing area has increased in Sweden. After the storms Gudrun and Per, the areas became planted with new plants, mainly spruce, but also other tree species. Storm areas are now being invaded by naturally rejuvenated birch in the tilling tracks. Since the birch often is initially growing faster than the spruce it is inhibiting the growth and is also damaging the spruce. The purpose of this thesis is to study the new brush saw with chain and compare it with the conventional clearing saw, mainly in terms of performance and ergonomics. The results show that the new brush saw with chain is very good in almost all clearing operations compared to the conventional clearing saw.

Rock groundwater has always caused major problems when tunnelling. Water leaking into tunnels can cause large problems, not only on the construction itself but also on the environment. A continuous water leakage can lead to a declining water supply, and geotechnical problems can occur as subsidence in the ground. Therefore it is of great importance to predict the consequences that can appear in the surroundings due to a declining groundwater surface.The aim of the study was to investigate different methods for predicting leakage and changes in groundwater level due to tunnelling excavations in rock. This thesis was performed by comparing mathematical methods, actual groundwater changes and results from preliminary investigations.Investigations were made for three railway tunnels planned by Botniabanan AB.